Synthesis and characterization of bioresorbable in situ crosslinkable ultra low molecular weight poly(lactide) macromer
The DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index.
Abstract
Reactive low molecular weight poly(L-lactide) (PLA) is required to produce in situ hardened scaffolds with fast rate of crosslinking, high crosslink density, and adequate mechanical strength. The objective of this work was to synthesize unsaturated ultra low molecular weight PLA (ULMW PLA) as an injectable in situ crosslinkable macromer for biomedical applications. Low molecular weight PLA was synthesized by ring-opening polymerization of L-lactide (LA) using diethylene glycol (DEG) as the initiator. The molar ratio of the LA to DEG ranged from 5 to 20. Non-solvents methanol, ether, and hexane were used for purification and fractionation. The PLA samples that were precipitated in methanol and ether had narrow distributions (PDI=1.2) and resulted in a powder with M(n) of 4.8 and a wax with M(n) of 3.6 kDa, respectively. The PLA sample in which the supernatant from ether was re-precipitated in hexane produced a viscous ULMW PLA with M(n) and PDI of 1.2 kDa and 1.2, respectively. The ULMW PLA was reacted with fumaryl chloride to produce unsaturated in situ crosslinkable poly(lactide fumarate) (PLAF) macromer. Porous scaffolds were produced after injection and in situ crosslinking of the PLAF macromer with NVP crosslinker in the presence of a porogen. New bone was formed in the scaffold when it was implanted in nude mice which demonstrated that the scaffold was osteoconductive. PLAF is potentially useful as a reactive macromer in fabrication of bioresorbable injectable in situ crosslinkable scaffolds for tissue regeneration.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Spectrometric Identification of Organic Compounds
Silverstein, R. M., & Bassler, G. C. (1962) · Journal of Chemical Education · doi:10.1021/ed039p546 · Cited by 14,272
Controlled Ring-Opening Polymerization of Lactide and Glycolide
Dechy-Cabaret, O., Martin-Vaca, B., & Bourissou, D. (2004) · Chemical Reviews · doi:10.1021/cr040002s · Cited by 2,257
Poly(lactide) Stereocomplexes: Formation, Structure, Properties, Degradation, and Applications
Tsuji, H. (2005) · Macromolecular Bioscience · doi:10.1002/mabi.200500062 · Cited by 1,366
Poly(lactide) Stereocomplexes: Formation, Structure, Properties, Degradation, and Applications
Tsuji, H. (2007) · Macromolecular Bioscience · doi:10.1002/mabi.200700275 · Cited by 1,021
Poly(lactide-co-glycolide)/hydroxyapatite composite scaffolds for bone tissue engineering
Kim, S.-S., Sun Park, M., Jeon, O., Yong Choi, C., & Kim, B.-S. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2005.08.016 · Cited by 766
Taboas, J. M., Maddox, R. D., Krebsbach, P. H., & Hollister, S. J. (2003) · Biomaterials · doi:10.1016/s0142-9612(02)00276-4 · Cited by 691
Preparation and characterization of biodegradable PLA polymeric blends
Chen, C.-C., Chueh, J.-Y., Tseng, H., Huang, H.-M., & Lee, S.-Y. (2003) · Biomaterials · doi:10.1016/s0142-9612(02)00466-0 · Cited by 583
Zhong, Z., Dijkstra, P. J., & Feijen, J. (2002) · Angewandte Chemie International Edition · doi:10.1002/1521-3773(20021202)41:23<4510::aid-anie4510>3.0.co;2-l · Cited by 433
Wu, L., & Ding, J. (2005) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.30487 · Cited by 208
Peter, S. J., Kim, P., Yasko, A. W., Yaszemski, M. J., & Mikos, A. G. (1999) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(19990305)44:3<314::aid-jbm10>3.0.co;2-w · Cited by 206
Karp, J. M., Shoichet, M. S., & Davies, J. E. (2003) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.10420 · Cited by 176
Bilati, U., Allémann, É., & Doelker, É. (2005) · Journal of Microencapsulation · doi:10.1080/02652040400026442 · Cited by 172
Processing, annealing and sterilisation of poly-l-lactide
Weir, N. A., Buchanan, F. J., Orr, J. F., Farrar, D. F., & Boyd, A. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2003.10.076 · Cited by 160
Cai, K., Yao, K., Cui, Y., Yang, Z., Li, X., Xie, H., Qing, T., & Gao, L. (2002) · Biomaterials · doi:10.1016/s0142-9612(01)00287-3 · Cited by 158
Use of a biomimetic strategy to engineer bone
Holy, C. E., Fialkov, J. A., Davies, J. E., & Shoichet, M. S. (2003) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.10453 · Cited by 138
Development of a dialysis in vitro release method for biodegradable microspheres
D’Souza, S. S., & DeLuca, P. P. (2005) · AAPS PharmSciTech · doi:10.1208/pt060242 · Cited by 132
A biodegradable polyurethane‐ascorbic acid scaffold for bone tissue engineering
Zhang, J., Doll, B. A., Beckman, E. J., & Hollinger, J. O. (2003) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.10015 · Cited by 117
Kang, S.-W., Jeon, O., & Kim, B.-S. (2005) · Tissue Engineering · doi:10.1089/ten.2005.11.438 · Cited by 115
Novel drug release profiles from micellar solutions of PLA–PEO–PLA triblock copolymers
Agrawal, S. K., Sanabria-DeLong, N., Coburn, J. M., Tew, G. N., & Bhatia, S. R. (2006) · Journal of Controlled Release · doi:10.1016/j.jconrel.2005.12.024 · Cited by 114
Zhu, Y., Chian, K. S., Chan‐Park, M. B. E., Mhaisalkar, P. S., & Ratner, B. D. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.05.069 · Cited by 113
Jabbari, E., Wang, S., Lu, L., Gruetzmacher, J. A., Ameenuddin, S., Hefferan, T. E., Currier, B. L., Windebank, A. J., & Yaszemski, M. J. (2005) · Biomacromolecules · doi:10.1021/bm050206y · Cited by 110
Self-citationTakasu, A., Iio, Y., Oishi, Y., Narukawa, Y., & Hirabayashi, T. (2005) · Macromolecules · doi:10.1021/ma0475378 · Cited by 105
Shung, A. K., Timmer, M. D., Jo, S., Engel, P. S., & Mikos, A. G. (2002) · Journal of Biomaterials Science, Polymer Edition · doi:10.1163/156856202753525963 · Cited by 92
PLA Screw Fixation of Lisfranc Injuries
Thordarson, D. B., & Hurvitz, G. (2002) · Foot & Ankle International · doi:10.1177/107110070202301106 · Cited by 86
DeFife, K. M., Shive, M. S., Hagen, K. M., Clapper, D. L., & Anderson, J. M. (1999) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(19990305)44:3<298::aid-jbm8>3.0.co;2-n · Cited by 81
Ueki, K., Nakagawa, K., Marukawa, K., Takazakura, D., Shimada, M., Takatsuka, S., & Yamamoto, E. (2005) · International Journal of Oral and Maxillofacial Surgery · doi:10.1016/j.ijom.2005.02.013 · Cited by 62
Day, R. M., Boccaccini, A. R., Maquet, V., Shurey, S., Forbes, A., Gabe, S. M., & Jérôme, R. (2004) · Journal of Materials Science Materials in Medicine · doi:10.1023/b:jmsm.0000030216.73274.86 · Cited by 50
Synthesis of disyndiotactic polylactide
Bero, M., ski, P. D., & Kasperczyk, J. (1999) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/(sici)1099-0518(19991115)37:22<4159::aid-pola15>3.0.co;2-n · Cited by 50
Synthesis of disyndiotactic polylactide
Bero, M., ski, P. D., & Kasperczyk, J. (1999) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/(sici)1099-0518(19991115)37:22<4038::aid-pola2>3.0.co;2-f · Cited by 50
Photopolymers in orthopedics: characterization of novel crosslinked polyanhydrides
Young, J. S., Gonzales, K. D., & Anseth, K. S. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00018-1 · Cited by 44
PROPANEDIOL METABOLISM AND ITS RELATION TO LACTIC ACID METABOLISM*
Miller, O. N., & Bazzano, G. (1965) · Annals of the New York Academy of Sciences · doi:10.1111/j.1749-6632.1965.tb47455.x · Cited by 44
Perry, C. M. (2004) · American Journal of Clinical Dermatology · doi:10.2165/00128071-200405050-00010 · Cited by 43
van de Witte, P., Boorsma, A., Esselbrugge, H., Dijkstra, P. J., van den Berg, J. W. A., & Feijen, J. (1996) · Macromolecules · doi:10.1021/ma950300e · Cited by 36
Jabbari, E., & Peppas, N. A. (1994) · Journal of Materials Science · doi:10.1007/bf00355956 · Cited by 30
Self-citationCharbit, Y., Hitzig, C., Bolla, M., Bitton, C., & Bertrand, M. (1999) · PubMed · Cited by 22
Jabbari, E. (2004) · Journal of Microencapsulation · doi:10.1080/02652040410001729296 · Cited by 16
Self-citation
Research works printed but not linked: 7
- Y. CHARBIT, C. HITZIG, M. BOLLA, C. BITTON and M. F. BERTRAND, Biomed. Instrum. Technol. 33 (1999) 71
- E. JABBARI, K. W. LEE, A. C. ELLISON, M. J. MOORE, J. A. TESK and M. J. YASZEMSKI, Trans. Soc. Biomater. (2004) 1348
- E. JABBARI, A. V. FLORSCHUTZ, L. G. PETERSEN, N. LIU, L. LU, B. L. CURRIER, M. J. YASZEMSKI, Trans. Soc. Biomaterials (2004) 512
- E. JABBARI, J. A. GRUETZMACHER, L. LU, B. L. CURRIER and M. J. YASZEMSKI, Trans. IEEE Med. Biol. (2003) 1219
- E. JABBARI, J. A. GRUETZMACHER, L. LU, B. L. CURRIER, M. J. YASZEMSKI, Trans. Soc. Biomaterials 986 (2004)
- E. JABBARI, Q. K. KANG and Y. H. AN, MUSC Orthopaedic J. 8 (2005) 47
- E. JABBARI, Trans. Soc. Biomaterials 491 (2006)
Cited by
Farah, S., Anderson, D. G., & Langer, R. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.06.012 · Cited by 3,443
Poly (Lactic Acid) Production for Tissue Engineering Applications
Lopes, M. S., Jardini, A. L., & Filho, R. M. (2012) · Procedia Engineering · doi:10.1016/j.proeng.2012.07.534 · Cited by 457
Photopolymerization Reactions: On the Way to a Green and Sustainable Chemistry
Tehfe, M., Louradour, F., Lalevée, J., & Fouassier, J. (2013) · Applied Sciences · doi:10.3390/app3020490 · Cited by 253
Synthesis and Characterization of Poly(D,L-Lactide-co-Glycolide) Copolymer
D’Avila Carvalho Erbetta, C. (2012) · Journal of Biomaterials and Nanobiotechnology · doi:10.4236/jbnb.2012.32027 · Cited by 233
Poly lactic acid (PLA) polymers: from properties to biomedical applications
Ebrahimi, F., & Ramezani Dana, H. (2022) · International Journal of Polymeric Materials and Polymeric Biomaterials · doi:10.1080/00914037.2021.1944140 · Cited by 214
Metadata
- Authors
- Jabbari, E., & He, X.
- Affiliations
- University of South Carolina (US)
- Corresponding author
- Jabbari, Esmaiel
- Venue
- Journal of Materials Science: Materials in Medicine
- Published
- 2007-06-28
- Volume
- 19
- Issue
- 1
- Pages
- 311-318
- ISSN
- 0957-4530 (ISSN-L)
- 1573-4838
- OpenAlex
- W2170145624
- Cited by
- 42
- References
- 34
- Citations by year
- 2023: 1 · 2021: 1 · 2020: 1 · 2018: 1 · 2017: 1 · 2016: 1 · 2015: 1 · 2013: 4 · 2012: 11
- FWCI
- 2.88
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.springer.com/tdm (tdm)
- Locations
- Journal of Materials Science Materials in Medicine (publishedVersion)
- PubMed (publishedVersion)
- Scholar Commons (University of South Carolina) (submittedVersion)
- Funders
- Aircast Foundation
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Engineering › Biomedical Engineering › Bone Tissue Engineering Materials
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Keywords
- injectable scaffolds, ring-opening polymerization, osteoconduction, bone regeneration, bioresorbable scaffolds, molecular weight distribution
- MeSH terms
- Methanol, Animals, Biocompatible Materials, Biomedical Engineering, Calorimetry, Differential Scanning, Fumarates, Materials Testing, Mice, Nude, Molecular Weight, Polyesters, Subcellular Fractions, Porosity, Absorbable Implants, Tissue Engineering, Mice
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.