Thermal and mechanical characterization of plasticized poly (L-lactide-co-D,L-lactide) films for food packaging
Open accessThe DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Abstract
AbstractIn this work amorphous poly(L-lactide-co-D,L-lactide) (PLLA/PDLLA) was blended with four different commercial adipates to obtain films with enhanced mechanical and thermal properties. Efficiency of plasticizers was evaluated by studying their compatibility with the polymer and their effect on its glass transition temperature. All plasticizers were compatible with the matrix up to a critical composition depending on its molar mass. The addition of plasticizers caused a decrease in elastic modulus and tensile stress, meanwhile elongation at break had a maximum increase for polyadipates with the lower molar mass. Monomeric adipate showed some migration at concentration higher than 10 mass%, while the addition of the higher molar mass plasticizer lead to eventual phase separation. Polyadipates with low molar mass showed a promising behaviour to overcome the brittleness in PLLA/PDLLA films.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
An Overview of Polylactides as Packaging Materials
Auras, R., Harte, B., & Selke, S. (2004) · Macromolecular Bioscience · doi:10.1002/mabi.200400043 · Cited by 3,454
Preparation and Properties of Plasticized Poly(lactic acid) Films
Ljungberg, N., & Wesslén, B. (2005) · Biomacromolecules · doi:10.1021/bm050098f · Cited by 331
Ljungberg, N., & Wesslén, B. (2003) · Polymer · doi:10.1016/j.polymer.2003.09.055 · Cited by 278
Phthalate and adipate esters in Australian packaging materials
Balafas, D. (1999) · Food Chemistry · doi:10.1016/s0308-8146(98)00240-4 · Cited by 145
Malmgren, T., Mays, J., & Pyda, M. (2006) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-005-7066-0 · Cited by 61
Wang, Y., & Mano, J. F. (2005) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-005-0631-8 · Cited by 33
Cited by
Poly(lactic acid) crystallization
Saeidlou, S., Huneault, M. A., Li, H., & Park, C. B. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.07.005 · Cited by 1,606
PLA composites: From production to properties
Murariu, M., & Dubois, P. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.04.003 · Cited by 1,005
Research progress in toughening modification of poly(lactic acid)
Liu, H., & Zhang, J. (2011) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.22283 · Cited by 767
Fortunati, E., Armentano, I., Zhou, Q., Iannoni, A., Saino, E., Visai, L., Berglund, L. A., & Kenny, J. M. (2012) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2011.09.066 · Cited by 581
Characterization of PLA-limonene blends for food packaging applications
Arrieta, M. P., López, J., Ferrándiz, S., & Peltzer, M. A. (2013) · Polymer Testing · doi:10.1016/j.polymertesting.2013.03.016 · Cited by 320
Metadata
- Authors
- Martino, V. P., Ruseckaite, R. A., & Jiménez, A.
- Venue
- Journal of Thermal Analysis and Calorimetry
- Published
- 2006-10-20
- Volume
- 86
- Issue
- 3
- Pages
- 707-712
- ISSN
- 1388-6150 (ISSN-L)
- 1572-8943
- OpenAlex
- W1968576974
- Cited by
- 104
- References
- 6
- FWCI
- 1.57
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Thermal and mechanical characterization of plasticized poly (L-lactide-co-D,L-lactide) films for food packaging. https://app.cochat.ai/papers/10.1007/s10973-006-7897-3
- The paper
- Martino, V. P., Ruseckaite, R. A., & Jiménez, A. (2006). Thermal and mechanical characterization of plasticized poly (L-lactide-co-D,L-lactide) films for food packaging. Journal of Thermal Analysis and Calorimetry. https://doi.org/10.1007/s10973-006-7897-3
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.