Microstructure, Chemical- and Phase Composition of Sanicro 25 Austenitic Steel After Oxidation in Steam at 700 °C
The DOI matches its Crossref record; 18 of the 18 references it cites were found in a registry or an index.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“In deposit D1 there is a simultaneous presence of Na and K, which could result in a lower melting temperature, respect to the K system only (as low as 310°C with 30% NaCl) [15,17,38].”
From Fireside corrosion and deposition on heat exchangers in biomass combustion systems (2023) · cites this paper as [38]
Citations
Cites
Metallic interconnectors for solid oxide fuel cells – a review
Quadakkers, W. J., Pirón-Abellán, J., Shemet, V., & Singheiser, L. (2003) · Materials at High Temperatures · doi:10.1179/mht.2003.015 · Cited by 420
Diffusion of cations in chromia layers grown on iron-base alloys
Lobnig, R. E., Schmidt, H. P., Hennesen, K., & Grabke, H. J. (1992) · Oxidation of Metals · doi:10.1007/bf00665632 · Cited by 388
Asteman, H., Svensson, J.-E., Norell, M., & Johansson, L.-G. (2000) · Oxidation of Metals · doi:10.1023/a:1004642310974 · Cited by 325
Enhanced oxidation of the 9%Cr steel P91 in water vapour containing environments
Ehlers, J., Young, D. J., Smaardijk, E. J., Tyagi, A. K., Penkalla, H. J., Singheiser, L., & Quadakkers, W. J. (2006) · Corrosion Science · doi:10.1016/j.corsci.2006.02.002 · Cited by 325
The Effect of Water Vapor on Selective Oxidation of Fe–Cr Alloys
Essuman, E., Meier, G. H., Zurek, J., Hänsel, M., & Quadakkers, W. J. (2008) · Oxidation of Metals · doi:10.1007/s11085-007-9090-x · Cited by 271
Development of high strength interstitial free steel by copper precipitation hardening
Rana, R., Bleck, W. P., Singh, S. B., & Mohanty, O. N. (2006) · Materials Letters · doi:10.1016/j.matlet.2006.10.037 · Cited by 82
Materials for high temperatures
Vaněk, V. (1968) · Vacuum · doi:10.1016/0042-207x(68)91364-x · Cited by 65
Zurek, J., Yang, S. ‐., Lin, D., Hüttel, T., Singheiser, L., & Quadakkers, W. J. (2014) · Materials and Corrosion · doi:10.1002/maco.201407901 · Cited by 56
Numerical simulation of long-term precipitate evolution in austenitic heat-resistant steels
Shim, J.-H., Kozeschnik, E., Jung, W.-S., Lee, S., Kim, D., Suh, J., Lee, Y., & Cho, Y. W. (2010) · Calphad · doi:10.1016/j.calphad.2010.01.001 · Cited by 55
Ha, V. T., & Jung, W.-S. (2012) · Materials Science and Engineering A · doi:10.1016/j.msea.2012.07.090 · Cited by 53
Research works printed but not linked: 3
- R. Rautio and S. Bruce, Advanced Materials & Processing 23, 35 (2008).
- W. J. Quadakkers, J. Piron-Abellan, V. Shemet and L. Singheiser, Materials at High Temperatures 20, 115 (2003).
- A. Hernas, M. Staszewski, J. Pasternak, and S. Fudali, in 10th Liege Conference on Materials for Advanced Power Engineering Liege, Belgium (2014), p. 850.
Cited by
Li, K., Zeng, Y., & Luo, J. (2020) · Energy · doi:10.1016/j.energy.2020.119178 · Cited by 18
Sroka, M., Zieliński, A., Golański, G., Pawlyta, M., Purzyńska, H., & Nový, F. (2023) · Archives of Civil and Mechanical Engineering · doi:10.1007/s43452-023-00690-y · Cited by 14
Fireside Corrosion of Heat Exchanger Materials for Advanced Solid Fuel Fired Power Plants
Mori, S., Pidcock, A., Sumner, J., Simms, N., & Oakey, J. (2022) · Oxidation of Metals · doi:10.1007/s11085-021-10094-z · Cited by 11
Fireside corrosion and deposition on heat exchangers in biomass combustion systems
Mori, S., Sanusi, T., Simms, N., & Sumner, J. (2023) · Materials at High Temperatures · doi:10.1080/09603409.2022.2138007 · Cited by 8
Cempura, G., Gil, A., Agüero, A., Gutiérrez, M., Kruk, A., & Czyrska‐Filemonowicz, A. (2019) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2019.124901 · Cited by 8
Self-citation
Metadata
- Authors
- Rutkowski, B., Gil, A., Agüero, A., González, V., & Czyrska-Filemonowicz, A.
- Affiliations
- AGH University of Krakow (PL)
- Instituto Nacional de Técnica Aeroespacial (ES)
- Corresponding author
- Rutkowski, B.
- Venue
- Oxidation of Metals
- Published
- 2017-12-19
- Volume
- 89
- Issue
- 1-2
- Pages
- 183-195
- ISSN
- 0030-770X (ISSN-L)
- 1573-4889
- OpenAlex
- W2776960528
- Cited by
- 17
- References
- 18
- Citations by year
- 2026: 1 · 2025: 3 · 2024: 1 · 2023: 1 · 2022: 2 · 2021: 5 · 2020: 3 · 2019: 1
- FWCI
- 1.01
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Oxidation of Metals (publishedVersion)
- Funders
- Akademia Górniczo-Hutnicza im. Stanislawa Staszica (PL) (11.11.110.299)
- Spanish Ministry of Economy and Energy (ENE2014-52359-C3-1-R)
- Topics
- Physical Sciences › Materials Science › Surfaces, Coatings and Films › High-Temperature Coating Behaviors
- Physical Sciences › Engineering › Mechanical Engineering › High Temperature Alloys and Creep
- Physical Sciences › Materials Science › Metals and Alloys › Hydrogen embrittlement and corrosion behaviors in metals
- Keywords
- Sanicro 25, austenitic stainless steel, steam oxidation, high-temperature oxidation, oxide scale, Cr2O3 scale, chromium depletion zone, M23C6 carbides, Laves phase, microstructure evolution, phase composition
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Microstructure, Chemical- and Phase Composition of Sanicro 25 Austenitic Steel After Oxidation in Steam at 700 °C. https://app.cochat.ai/papers/10.1007/s11085-017-9824-3
- The paper
- Rutkowski, B., Gil, A., Agüero, A., González, V., & Czyrska-Filemonowicz, A. (2018). Microstructure, Chemical- and Phase Composition of Sanicro 25 Austenitic Steel After Oxidation in Steam at 700 °C. Oxidation of Metals. https://doi.org/10.1007/s11085-017-9824-3
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.