The Influence of Surfactant on PLGA Microsphere Glass Transition and Water Sorption: Remodeling the Surface Morphology to Attenuate the Burst Release
The DOI matches its Crossref record; 55 of the 56 references it cites were found in a registry or an index.
Abstract
Purpose The stability of protein unloaded and loaded poly(lactic-co-glycolic acid) (PLGA) microspheres fabricated with surfactant was challenged through exposure to environmental conditions of different relative humidity. Methods Polyvinyl alcohol (PVA) or Triton X-100 was added to the primary emulsion of the double-emulsion solvent evaporation technique. After storage at ambient humidity and 75% relative humidity, the mechanical stability of the polymer was tested to reveal PLGA chain mobility using differential scanning calorimetry. Subsequent surface modifications were examined by atomic force microscopy (AFM), and protein release profiles were collected. Results Residual amounts of PVA and particularly Triton X-100 raised the hydrophilicity of the microspheres. When exposed to ambient humidity or 75% relative humidity, PVA and Triton X-100 had, respectively, an antiplasticizing and a plasticizing effect upon PLGA, and both led to physical aging. The high-resolution AFM imaging of microspheres containing model protein and Triton X-100 showed that the depth of the surface pores was reduced when exposed to 75% relative humidity, and the initial burst release subsequently decreased. Conclusion These studies suggested that the mechanical stability of PLGA was influenced by the addition of surfactants, which, depending on the formulation, led to surface pore remodeling under high humidity, reducing the initial burst release while maintaining the spherical integrity of the micro…
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“PLGA are a family of FDA-approved biodegradable polymers that are physically strong and highly biocompatible and have been extensively studied as delivery vehicles for drugs, proteins and various other macromolecules such as DNA, RNA and peptides [1–3].”
From Poly Lactic-co-Glycolic Acid (PLGA) as Biodegradable Controlled Drug Delivery Carrier (2011) · cites this paper as [1]
In the citing paper
“PLGA are a family of FDA-approved biodegradable polymers that are physically strong and highly biocompatible and have been extensively studied as delivery vehicles for drugs, proteins and various other macromolecules such as DNA, RNA and peptides [1–3].”
From Poly Lactic-co-Glycolic Acid (PLGA) as Biodegradable Controlled Drug Delivery Carrier (2011) · cites this paper as [1]
In the citing paper
“PLGA are a family of FDA-approved biodegradable polymers that are physically strong and highly biocompatible and have been extensively studied as delivery vehicles for drugs, proteins and various other macromolecules such as DNA, RNA and peptides [1–3].”
From Poly Lactic-co-Glycolic Acid (PLGA) as Biodegradable Controlled Drug Delivery Carrier (2011) · cites this paper as [1]
In the citing paper
“PLGA are a family of FDA-approved biodegradable polymers that are physically strong and highly biocompatible and have been extensively studied as delivery vehicles for drugs, proteins and various other macromolecules such as DNA, RNA and peptides [1–3].”
From Poly Lactic-co-Glycolic Acid (PLGA) as Biodegradable Controlled Drug Delivery Carrier (2011) · cites this paper as [1]
In the citing paper
“PLGA are a family of FDA-approved biodegradable polymers that are physically strong and highly biocompatible and have been extensively studied as delivery vehicles for drugs, proteins and various other macromolecules such as DNA, RNA and peptides [1–3].”
From Poly Lactic-co-Glycolic Acid (PLGA) as Biodegradable Controlled Drug Delivery Carrier (2011) · cites this paper as [1]
Citations
Cites
Jain, R. A. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00115-0 · Cited by 2,214
Characteristics and Significance of the Amorphous State in Pharmaceutical Systems
Hancock, B. C., & Zografi, G. (1997) · Journal of Pharmaceutical Sciences · doi:10.1021/js9601896 · Cited by 1,922
Thermal characterization of polymeric materials
Turi, E. A. (1981) · Cited by 1,393
Why degradable polymers undergo surface erosion or bulk erosion
Burkersroda, F. V., Schedl, L., & Göpferich, A. (2002) · Biomaterials · doi:10.1016/s0142-9612(02)00170-9 · Cited by 1,146
Sahoo, S. K., Panyam, J., Prabha, S., & Labhasetwar, V. (2002) · Journal of Controlled Release · doi:10.1016/s0168-3659(02)00127-x · Cited by 990
Hancock, B. C., & Zografi, G. (1994) · Pharmaceutical Research · doi:10.1023/a:1018941810744 · Cited by 714
Protein Instability in Poly(Lactic-co-Glycolic Acid) Microparticles
van de Weert, M., Hennink, W. E., & Jiskoot, W. (2000) · Pharmaceutical Research · doi:10.1023/a:1026498209874 · Cited by 708
Thermal characterization of polymeric materials
(1997) · Choice Reviews Online · doi:10.5860/choice.35-0290 · Cited by 657
Zambaux, M. (1998) · Journal of Controlled Release · doi:10.1016/s0168-3659(97)00106-5 · Cited by 537
The Control of Humidity by Saturated Salt Solutions
O'Brien, F. E. M. (1948) · Journal of Scientific Instruments · doi:10.1088/0950-7671/25/3/305 · Cited by 518
A Theoretical Model of Erosion and Macromolecular Drug Release from Biodegrading Microspheres
Batycky, R. P., Hanes, J., Langer, R., & Edwards, D. A. (1997) · Journal of Pharmaceutical Sciences · doi:10.1021/js9604117 · Cited by 374
Wang, J., Wang, B. M., & Schwendeman, S. P. (2002) · Journal of Controlled Release · doi:10.1016/s0168-3659(02)00137-2 · Cited by 343
The use of solubility parameters in pharmaceutical dosage form design
Hancock, B. (1997) · International Journal of Pharmaceutics · doi:10.1016/s0378-5173(96)04828-4 · Cited by 321
Yang, Y.-Y., Chia, H.-H., & Chung, T.-S. (2000) · Journal of Controlled Release · doi:10.1016/s0168-3659(00)00291-1 · Cited by 292
Blanco, D., & Alonso, M. J. (1998) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/s0939-6411(98)00011-3 · Cited by 251
Physics of Polymer Surfaces and Interfaces
(1992) · Elsevier eBooks · doi:10.1016/c2009-0-26081-8 · Cited by 249
The effect of a water/organic solvent interface on the structural stability of lysozyme
van de Weert, M., Hoechstetter, J., Hennink, W. E., & Crommelin, D. J. A. (2000) · Journal of Controlled Release · doi:10.1016/s0168-3659(00)00277-7 · Cited by 228
Oksanen, C. A., & Zografi, G. (1990) · Pharmaceutical Research · doi:10.1023/a:1015834715152 · Cited by 219
Rafati, H., Coombes, A. G. A., Adler, J., Holland, J., & Davis, S. S. (1997) · Journal of Controlled Release · doi:10.1016/s0168-3659(96)01475-7 · Cited by 206
Sol−Gel Transition Temperature of PLGA-g-PEG Aqueous Solutions
Chung, Y.-M., Simmons, K. L., Gutowska, A., & Jeong, B. (2002) · Biomacromolecules · doi:10.1021/bm0156431 · Cited by 194
Sah, H. (1999) · Journal of Controlled Release · doi:10.1016/s0168-3659(98)00148-5 · Cited by 187
Passerini, N., & Craig, D. Q. M. (2001) · Journal of Controlled Release · doi:10.1016/s0168-3659(01)00245-0 · Cited by 165 · cited 1×
“Comparative DSC data for polylactide microspheres showing aging of polylactide microspheres are provided by Passerini and Craig (44).”
MethodLemaire, V., Bélair, J., & Hildgen, P. (2003) · International Journal of Pharmaceutics · doi:10.1016/s0378-5173(03)00165-0 · Cited by 151
Shamblin, S. L., Huang, E. Y., & Zografi, G. (1996) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/bf01992846 · Cited by 148
Shakesheff, K. M., Évora, C., Soriano, I., & Langer, R. (1997) · Journal of Colloid and Interface Science · doi:10.1006/jcis.1996.4637 · Cited by 137
Çapan, Y., Woo, B. H., Gebrekidan, S., Ahmed, S., & DeLuca, P. P. (1999) · Journal of Controlled Release · doi:10.1016/s0168-3659(99)00076-0 · Cited by 130
Effect of protein molecular weight on release from micron-sized PLGA microspheres
Sandor, M., Enscore, D. J., Weston, P. J., & Mathiowitz, E. (2001) · Journal of Controlled Release · doi:10.1016/s0168-3659(01)00446-1 · Cited by 127
Li, W.-I., Anderson, K. W., Mehta, R., & DeLuca, P. P. (1995) · Journal of Controlled Release · doi:10.1016/0168-3659(95)00076-3 · Cited by 119
Molecular Mobility in Mixtures of Absorbed Water and Solid Poly(vinylpyrrolidone)
Oksanen, C. A., & Zografi, G. (1993) · Pharmaceutical Research · doi:10.1023/a:1018988506336 · Cited by 117
Boury, F., Ivanova, T., Panaiotov, I., Proust, J. E., Bois, A., & Richou, J. (1995) · Journal of Colloid and Interface Science · doi:10.1006/jcis.1995.1047 · Cited by 110
Water mobility in amorphous lactose below and close to the glass transition temperature
Buckton, G., & Darcy, P. A. (1996) · International Journal of Pharmaceutics · doi:10.1016/0378-5173(96)04503-6 · Cited by 104
Mechanisms of polymer degradation in implantable devices. 2. Poly(DL‐lactic acid)
Ali, S. A. M., Doherty, P. J., & Williams, D. F. (1993) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820271108 · Cited by 101
Kang, F., Jiang, G., Hinderliter, A. K., DeLuca, P. P., & Singh, J. (2002) · Pharmaceutical Research · doi:10.1023/a:1015354028908 · Cited by 96
De, S., & Robinson, D. H. (2004) · AAPS PharmSciTech · doi:10.1208/pt050453 · Cited by 94
Release mechanisms from gentamicin loaded poly(lactic-co-glycolic acid) (PLGA) microparticles
Frieß, W., & Schlapp, M. (2002) · Journal of Pharmaceutical Sciences · doi:10.1002/jps.10012 · Cited by 91
Development of a single-shot subunit vaccine for HIV-1.
Cleland, J. L., Mf, P., Lim, A., Barrón, L., Berman, P. W., Eastman, D. J., Nunberg, J. H., Wrin, T., & Vennari, J. (1994) · PubMed · Cited by 88
Deng, X., Li, X. H., Yuan, M., Xiong, C., HUANG, Z. ‐., Jia, W. X., & Zhang, Y. H. (1999) · Journal of Controlled Release · doi:10.1016/s0168-3659(98)00147-3 · Cited by 85
Characterisation of the Glass Transition of an Amorphous Drug Using Modulated DSC
Royall, P. G., Craig, D. Q. M., & Doherty, C. G. (1998) · Pharmaceutical Research · doi:10.1023/a:1011902816175 · Cited by 84
Cleland, J. L., Lim, A., Barrón, L., Duenas, E. T., & Powell, M. F. (1997) · Journal of Controlled Release · doi:10.1016/s0168-3659(96)01625-2 · Cited by 82
Localization of bovine serum albumin in double-walled microspheres
Rahman, N. A., & Mathiowitz, E. (2003) · Journal of Controlled Release · doi:10.1016/j.jconrel.2003.10.010 · Cited by 81
Steendam, R., van Steenbergen, M. J., Hennink, W. E., Frijlink, H. W., & Lerk, C. F. (2001) · Journal of Controlled Release · doi:10.1016/s0168-3659(00)00342-4 · Cited by 73
Swelling of Poly(dl-lactide) and Polylactide-co-glycolide in Humid Environments
Sharp, J. S., Forrest, J. A., & Jones, R. A. L. (2001) · Macromolecules · doi:10.1021/ma011163q · Cited by 72
den Mooter, G. V., Augustijns, P., & Kinget, R. (1999) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/s0939-6411(99)00013-2 · Cited by 67
Poly(d,l-Lactide-Co-Glycolide) Encapsulated Poly(Vinyl Alcohol) Hydrogel as a Drug Delivery System
Mandal, T. K., Bostanian, L. A., Graves, R. A., & Chapman, S. R. (2002) · Pharmaceutical Research · doi:10.1023/a:1020765615379 · Cited by 65
Physics of polymer surfaces and interfaces
Evans, S. D., & Henderson, J. R. (1993) · Polymer · doi:10.1016/0032-3861(93)90654-s · Cited by 64
NMR and confocal microscopy studies of the mechanisms of burst drug release from PLGA microspheres
Messaritaki, A., Black, S. J., van der Walle, C. F., & Rigby, S. P. (2005) · Journal of Controlled Release · doi:10.1016/j.jconrel.2005.08.010 · Cited by 59
Lechuga‐Ballesteros, D., Bakri, A., & Miller, D. P. (2003) · Pharmaceutical Research · doi:10.1023/a:1022406709912 · Cited by 50
Pozuelo, J., & Baselga, J. (2002) · Polymer · doi:10.1016/s0032-3861(02)00442-1 · Cited by 43
Controlled release of the fibronectin central cell binding domain from polymeric microspheres
Bouissou, C., Potter, U., Altroff, H., Mardon, H. J., & van der Walle, C. F. (2004) · Journal of Controlled Release · doi:10.1016/j.jconrel.2003.12.016 · Cited by 37
Self-citationvan der Walle, C. F., Altroff, H., & Mardon, H. J. (2002) · Protein Engineering Design and Selection · doi:10.1093/protein/15.12.1021 · Cited by 33
Ehtezazi, T., Washington, C., & Melia, C. D. (2000) · Journal of Controlled Release · doi:10.1016/s0168-3659(99)00255-2 · Cited by 30
Development of Biodegradable Microcapsules as Carrier for Oral Controlled Delivery of Amifostine
Mandal, T. K., Bostanian, L. A., Graves, R. A., Chapman, S. R., & Womack, I. (2002) · Drug Development and Industrial Pharmacy · doi:10.1081/ddc-120002849 · Cited by 18
Sertsou, G., Butler, J., Hempenstall, J., & Rades, T. (2003) · Journal of Pharmacy and Pharmacology · doi:10.1111/j.2042-7158.2003.tb02431.x · Cited by 13
Thermal Characteristics of Poly (DL-Lactic Acid) Microspheres Containing Neurotensin Analogue.
Yamakawa, I., ASHIZAWA, K., TSUDA, T., Watanabe, S., HAYASHI, M., & AWAZU, S. (1992) · Chemical and Pharmaceutical Bulletin · doi:10.1248/cpb.40.2870 · Cited by 4
Research works printed but not linked: 2
- S. De, 2004, AAPS PharmSciTech, 13, 1
- J. M. G. Cowie, 1986, Polym. Commun., 27, 258
Cited by
Poly Lactic-co-Glycolic Acid (PLGA) as Biodegradable Controlled Drug Delivery Carrier
Makadia, H. K., & Siegel, S. J. (2011) · Polymers · doi:10.3390/polym3031377 · Cited by 4,816
“of FDA-approved biodegradable polymers that are physically strong and highly biocompatible and have been extensively studied as delivery vehicles for drugs, proteins and various other macromolecules such as DNA, RNA and peptides [1–3].”
BackgroundThe mechanisms of drug release in poly(lactic-co-glycolic acid)-based drug delivery systems—A review
Fredenberg, S., Wahlgren, M., Reslow, M., & Axelsson, A. (2011) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2011.05.049 · Cited by 1,286
Yusuf, A., Almotairy, A. R. Z., Henidi, H., Alshehri, O. Y., & Aldughaim, M. S. (2023) · Polymers · doi:10.3390/polym15071596 · Cited by 914
Issues in long-term protein delivery using biodegradable microparticles
Ye, M., Kim, S., & Park, K. (2010) · Journal of Controlled Release · doi:10.1016/j.jconrel.2010.05.011 · Cited by 386
Mohamed, F., & van der Walle, C. F. (2008) · Journal of Pharmaceutical Sciences · doi:10.1002/jps.21082 · Cited by 299
Metadata
- Authors
- Bouissou, C., Rouse, J. J., Price, R., & van der Walle, C. F.
- Affiliations
- University of Bath (GB)
- University of Strathclyde (GB)
- Venue
- Pharmaceutical Research
- Published
- 2006-05-25
- Volume
- 23
- Issue
- 6
- Pages
- 1295-1305
- ISSN
- 0724-8741 (ISSN-L)
- 1573-904X
- OpenAlex
- W2015189577
- Cited by
- 145
- References
- 56
- Citations by year
- 2026: 6 · 2025: 8 · 2024: 6 · 2023: 11 · 2022: 7 · 2021: 7 · 2020: 12 · 2019: 10 · 2018: 4 · 2017: 9 · 2016: 5 · 2015: 14 · 2014: 4 · 2013: 9 · 2012: 3
- FWCI
- 3.92
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.springer.com/tdm (tdm)
- Locations
- Pharmaceutical Research (publishedVersion)
- PubMed (publishedVersion)
- Topics
- Life Sciences › Pharmacology, Toxicology and Pharmaceutics › Pharmaceutical Science › Advanced Drug Delivery Systems
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Physical Sciences › Materials Science › Biomaterials › Nanoparticle-Based Drug Delivery
- Keywords
- PLGA microspheres, surfactants, Triton X-100, polyvinyl alcohol, glass transition, water sorption, relative humidity, physical aging, plasticization, protein release, burst release, surface morphology, double emulsion solvent evaporation, mechanical stability
- MeSH terms
- Polylactic Acid-Polyglycolic Acid Copolymer, Delayed-Action Preparations, Drug Carriers, Drug Compounding, Fibronectins, Humidity, Microspheres, Particle Size, Polyglycolic Acid, Polymers, Polyvinyl Alcohol, Solubility, Surface Properties, Surface-Active Agents, Time Factors, Water, Porosity, Octoxynol, Lactic Acid, Transition Temperature
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.