Analysis of 3D Prints by X-ray Computed Microtomography and Terahertz Pulsed Imaging
Open accessThe DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
PURPOSE: A 3D printer was used to realise compartmental dosage forms containing multiple active pharmaceutical ingredient (API) formulations. This work demonstrates the microstructural characterisation of 3D printed solid dosage forms using X-ray computed microtomography (XμCT) and terahertz pulsed imaging (TPI). METHODS: Printing was performed with either polyvinyl alcohol (PVA) or polylactic acid (PLA). The structures were examined by XμCT and TPI. Liquid self-nanoemulsifying drug delivery system (SNEDDS) formulations containing saquinavir and halofantrine were incorporated into the 3D printed compartmentalised structures and in vitro drug release determined. RESULTS: A clear difference in terms of pore structure between PVA and PLA prints was observed by extracting the porosity (5.5% for PVA and 0.2% for PLA prints), pore length and pore volume from the XμCT data. The print resolution and accuracy was characterised by XμCT and TPI on the basis of the computer-aided design (CAD) models of the dosage form (compartmentalised PVA structures were 7.5 ± 0.75% larger than designed; n = 3). CONCLUSIONS: The 3D printer can reproduce specific structures very accurately, whereas the 3D prints can deviate from the designed model. The microstructural information extracted by XμCT and TPI will assist to gain a better understanding about the performance of 3D printed dosage forms.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Zeitler, J. A., Shen, Y., Baker, C., Taday, P. F., Pepper, M., & Rades, T. (2007) · Journal of Pharmaceutical Sciences · doi:10.1002/jps.20789 · Cited by 208 · cited 1×
“of pharmaceutical film coated tablets, structural imaging and 3D chemical imaging of solid dosage forms (14,23).”
BackgroundSelf-citationMichaelsen, M. H., Wasan, K. M., Sivak, O., Müllertz, A., & Rades, T. (2016) · The AAPS Journal · doi:10.1208/s12248-015-9832-7 · Cited by 55 · cited 1×
“Drug release was experimentally determined by in-vitro release testing using the basket method (USP 1) in HCl pH 1 on a Erweka DT 70 (Heusanstamm, Germany) at 100 rpm and 37C and high-performance liquid chromatography (HPLC) analysis was carried out on a UHPLC+ Dionex Ultimate 3000 Thermo Fischer Scientific (Waltham,…”
MethodSelf-citation
Cited by
3D Printing in Pharmaceutical and Medical Applications – Recent Achievements and Challenges
Jamróz, W., Szafraniec, J., Kurek, M., & Jachowicz, R. (2018) · Pharmaceutical Research · doi:10.1007/s11095-018-2454-x · Cited by 707
3D printed medicines: A new branch of digital healthcare
Awad, A., Trenfield, S. J., Gaisford, S., & Basit, A. W. (2018) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2018.07.024 · Cited by 265
Characterisation of pore structures of pharmaceutical tablets: A review
Markl, D., Strobel, A., Schlossnikl, R., Bøtker, J., Bawuah, P., Ridgway, C., Rantanen, J., Rades, T., Gane, P., Peiponen, K.-E., et al. (2018) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2018.01.017 · Cited by 154
Self-citationMarkl, D., Wang, P., Ridgway, C., Karttunen, A.-P., Chakraborty, M., Bawuah, P., Pääkkönen, P., Gane, P., Ketolainen, J., Peiponen, K.-E., et al. (2017) · Journal of Pharmaceutical Sciences · doi:10.1016/j.xphs.2017.02.028 · Cited by 77
Self-citationMeasuring Open Porosity of Porous Materials Using THz-TDS and an Index-Matching Medium
Naftaly, M., Tikhomirov, I., Hou, P., & Markl, D. (2020) · Sensors · doi:10.3390/s20113120 · Cited by 30
Self-citation
Metadata
- Authors
- Markl, D., Zeitler, J. A., Rasch, C., Michaelsen, M. H., Müllertz, A., Rantanen, J., Rades, T., & Bøtker, J.
- Venue
- Pharmaceutical Research
- Published
- 2016-12-21
- Volume
- 34
- Issue
- 5
- Pages
- 1037-1052
- ISSN
- 0724-8741 (ISSN-L)
- 1573-904X
- OpenAlex
- W2565380858
- Cited by
- 96
- References
- 2
- FWCI
- 8.83
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Analysis of 3D Prints by X-ray Computed Microtomography and Terahertz Pulsed Imaging. https://app.cochat.ai/papers/10.1007/s11095-016-2083-1
- The paper
- Markl, D., Zeitler, J. A., Rasch, C., Michaelsen, M. H., Müllertz, A., Rantanen, J., Rades, T., & Bøtker, J. (2017). Analysis of 3D Prints by X-ray Computed Microtomography and Terahertz Pulsed Imaging. Pharmaceutical Research. https://doi.org/10.1007/s11095-016-2083-1
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.