The DOI matches its Crossref record; 41 of the 41 references it cites were found in a registry or an index.
From Powders to Thermally Sprayed Coatings
Open accessAbstract
Since the early stages of thermal spray, it has been recognized that the powder composition, size distribution, shape, mass density, mechanical resistance, components distribution for composite particles play a key role in coating microstructure and thermo mechanical properties. The principal characteristics of particles are strongly linked to the manufacturing process. Coatings also depend on the process used to spray particles and spray parameters. Many papers have been devoted to the relationships existing between coating properties and structures at different scales and manufacturing processes. In many conventional spray conditions resulting in micrometric structures, among the different parameters, good powder flow ability, and dense particles are important features. Thermal plasma treatment, especially by RF plasma, of particles, prepared by different manufacturing processes, allows achieving such properties and it is now developed at an industrial scale. Advantages and drawbacks of this process will be discussed. Another point, which will be approached, is the self-propagating high-temperature synthesis, depending very strongly upon the starting composite particle manufacturing. However, as everybody knows, “small is beautiful” and nano- or finely structured coatings are now extensively studied with spraying of: (i) very complex alloys containing multiple elements which exhibit a glass forming capability when cooled-down, their under-cooling temperature being below the glass transition temperature; (ii) conventional micrometer-sized particles (in the 30-90 μm range) made of agglomerated nanometer-sized particles; (iii) sub-micrometer- or nanometer-sized particles via a suspension in which also, instead of particles, stable sol of nanometer-sized particles can be introduced; and (iv) spray solutions of final material precursor. These different processes using plasma, HVOF or sometimes flame and also cold-gas spray will be discussed together with the production of nanometer-sized particles via the chemical reaction method or by a special type of milling: the cryogenic milling process often referred to as “cryomilling.”
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Mechanical alloying and milling
Suryanarayana, C. (2001) · Progress in Materials Science · doi:10.1016/s0079-6425(99)00010-9 · Cited by 8,075
Mechanical Alloying And Milling
Suryanarayana, C. (2004) · CRC Press eBooks · doi:10.1201/9780203020647 · Cited by 3,882
The Science and Engineering of Thermal Spray Coatings
Pawlowski, L. (2008) · Wiley eBooks · doi:10.1002/9780470754085 · Cited by 2,033
Development of a generalized parameter window for cold spray deposition
Schmidt, T., Gärtner, F., Assadi, H., & Kreye, H. (2006) · Acta Materialia · doi:10.1016/j.actamat.2005.10.005 · Cited by 1,183
Fauchais, P. (2004) · Journal of Physics D: Applied Physics · doi:10.1088/0022-3727/37/9/r02 · Cited by 777
Self-citationAn Analysis of the Cold Spray Process and Its Coatings
Stoltenhoff, T., Kreye, H., & Richter, H. J. (2002) · Journal of Thermal Spray Technology · doi:10.1361/105996302770348682 · Cited by 583
Challenges and advances in nanocomposite processing techniques
Viswanathan, V., Laha, T., Balani, K., Agarwal, A., & Seal, S. (2006) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2006.11.002 · Cited by 478
Knowledge Concerning Splat Formation: An Invited Review
Fauchais, P., Fukumoto, M., Vardelle, A., & Vardelle, M. (2004) · Journal of Thermal Spray Technology · doi:10.1361/10599630419670 · Cited by 477
Self-citationImpact of High Velocity Cold Spray Particles
Dykhuizen, R. C., Smith, M. F., Gilmore, D. L., Neiser, R. A., Jiang, X., & Sampath, S. (1999) · Journal of Thermal Spray Technology · doi:10.1361/105996399770350250 · Cited by 413
The Cold Spray Process and Its Potential for Industrial Applications
Gärtner, F., Stoltenhoff, T., Schmidt, T., & Kreye, H. (2006) · Journal of Thermal Spray Technology · doi:10.1361/105996306x108110 · Cited by 362
Cited by
Ulusoy, U. (2023) · Minerals · doi:10.3390/min13010091 · Cited by 334
Thermal plasma technology: The prospective future in material processing
Samal, S. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.10.154 · Cited by 268
Metadata
- Authors
- Fauchais, P., Montavon, G., & Bertrand, G.
- Venue
- Journal of Thermal Spray Technology
- Published
- 2009-12-02
- Volume
- 19
- Issue
- 1-2
- Pages
- 56-80
- ISSN
- 1059-9630 (ISSN-L)
- 1544-1016
- OpenAlex
- W2038442340
- Cited by
- 268
- References
- 41
- FWCI
- 18.08
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: From Powders to Thermally Sprayed Coatings. https://app.cochat.ai/papers/10.1007/s11666-009-9435-x
- The paper
- Fauchais, P., Montavon, G., & Bertrand, G. (2010). From Powders to Thermally Sprayed Coatings. Journal of Thermal Spray Technology. https://doi.org/10.1007/s11666-009-9435-x
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.