The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Methods for Rapid Pore Classification in Metal Additive Manufacturing
Open accessAbstract
The additive manufacturing of metals requires optimisation to find the melting conditions that give the desired material properties. A key aspect of the optimisation is minimising the porosity that forms during the melting process. A corresponding analysis of pores of different types (e.g. lack of fusion or keyholes) is therefore desirable. Knowing that pores form under different thermal conditions allows greater insight into the optimisation process. In this work, two pore classification methods were trialled: unsupervised machine learning and defined limits. These methods were applied to 3D pore data from X-ray computed tomography and 2D pore data from micrographs. Data were collected from multiple alloys (Ti-6Al-4V, Inconel 718, Ti-5553 and Haynes 282). Machine learning was found to be the most useful for 3D pore data and defined limits for the 2D pore data; the latter worked by optimising the limits using energy densities.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Gibson, I., Rosen, D., & Stucker, B. (2015) · doi:10.1007/978-1-4939-2113-3 · Cited by 3,299
Kriegel, H., Kröger, P., Sander, J., & Zimek, A. (2011) · WIREs Data Mining and Knowledge Discovery · doi:10.1002/widm.30 · Cited by 900
Uriondo, A., Esperon-Miguez, M., & Perinpanayagam, S. (2015) · Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering · doi:10.1177/0954410014568797 · Cited by 489
Cited by
Svetlizky, D., Das, M., Zheng, B., Vyatskikh, A. L., Bose, S., Bandyopadhyay, A., Schoenung, J. M., Lavernia, E. J., & Eliaz, N. (2021) · Materials Today · doi:10.1016/j.mattod.2021.03.020 · Cited by 1,371
A review on machine learning in 3D printing: applications, potential, and challenges
Goh, G. D., Sing, S. L., & Yeong, W. Y. (2021) · Artificial Intelligence Review · doi:10.1007/s10462-020-09876-9 · Cited by 652
Defects and anomalies in powder bed fusion metal additive manufacturing
Mostafaei, A., Zhao, C., He, Y., Reza Ghiaasiaan, S., Shi, B., Shao, S., Shamsaei, N., Wu, Z., Kouraytem, N., Sun, T., et al. (2022) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2021.100974 · Cited by 491
Kan, W. H., Chiu, L. N. S., Lim, C. V. S., Zhu, Y., Tian, Y., Jiang, D., & Huang, A. (2022) · Journal of Materials Science · doi:10.1007/s10853-022-06990-7 · Cited by 309
Wang, S., Ning, J., Zhu, L., Yang, Z., Yan, W., Dun, Y., Xue, P., Xu, P., Bose, S., & Bandyopadhyay, A. (2022) · Materials Today · doi:10.1016/j.mattod.2022.08.014 · Cited by 279
Metadata
- Authors
- Snell, R., Tammas-Williams, S., Chechik, L., Lyle, A., Hernández-Nava, E., Boig, C., Panoutsos, G., & Todd, I.
- Venue
- JOM
- Published
- 2019-09-04
- Volume
- 72
- Issue
- 1
- Pages
- 101-109
- ISSN
- 0148-6608 (ISSN-L)
- 1047-4838
- 1543-1851
- OpenAlex
- W2972112647
- Cited by
- 211
- References
- 3
- FWCI
- 8.51
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Methods for Rapid Pore Classification in Metal Additive Manufacturing. https://app.cochat.ai/papers/10.1007/s11837-019-03761-9
- The paper
- Snell, R., Tammas-Williams, S., Chechik, L., Lyle, A., Hernández-Nava, E., Boig, C., Panoutsos, G., & Todd, I. (2020). Methods for Rapid Pore Classification in Metal Additive Manufacturing. JOM. https://doi.org/10.1007/s11837-019-03761-9
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.