The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Synthesis, characterisation and methyl orange adsorption capacity of ferric oxide–biochar nano-composites derived from pulp and paper sludge
Open accessAbstract
A Fe 2 O 3 –biochar nano-composite (Fe 2 O 3 –BC) was prepared from FeCl 3 -impregnated pulp and paper sludge (PPS) by pyrolysis at 750 °C. The characteristics and methyl orange (MO) adsorption capacity of Fe 2 O 3 –BC were compared to that of unactivated biochar (BC). X-ray diffraction (XRD) and scanning electron microscopy (SEM) confirmed the composite material was nano-sized. Fourier transform infrared (FTIR) spectroscopy revealed the presence of hydroxyl and aromatic groups on BC and on Fe 2 O 3 –BC, but Brunauer–Emmett–Teller (BET) surface area and Barrett–Joyner–Halenda (BJH) porosity were lower for Fe 2 O 3 –BC than BC. Despite the lower BET surface area and porosity of Fe 2 O 3 –BC, its MO adsorption capacity was 52.79 % higher than that of BC. The equilibrium adsorption data were best represented by the Freundlich model with a maximum adsorption capacity of 20.53 mg g −1 at pH 8 and 30 min contact time. MO adsorption obeyed pseudo-second-order kinetics for both BC and Fe 2 O 3 –BC with R 2 values of 0.996 and 0.999, respectively. Higher MO adsorption capacity for Fe 2 O 3 –BC was attributed to the hybrid nature of the nano-composites; adsorption occurred on both biochar matrix and Fe 2 O 3 nanocrystals. Gibbs free energy calculations confirmed the adsorption is energetically favourable and spontaneous with a high preference for adsorption on both adsorbents. The nano-composite can be used for the efficient removal of MO (>97 %) from contaminated wastewater.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Mohan, D., Sarswat, A., Ok, Y. S., & Pittman, C. U. (2014) · Bioresource Technology · doi:10.1016/j.biortech.2014.01.120 · Cited by 2,313
Gadd, G. M. (2009) · Journal of Chemical Technology & Biotechnology · doi:10.1002/jctb.1999 · Cited by 1,287
Removal of methylene blue by adsorption onto activated carbon developed from Ficus carica bast
Pathania, D., Sharma, S., & Singh, P. (2017) · Arabian Journal of Chemistry · doi:10.1016/j.arabjc.2013.04.021 · Cited by 1,028
Gong, R., Ye, J., Dai, W., Yan, X., Hu, J., Hu, X., Li, S., & Huang, H. (2013) · Industrial & Engineering Chemistry Research · doi:10.1021/ie402138w · Cited by 323
Cited by
Yaashikaa, P. R., Kumar, P. S., Varjani, S., & Saravanan, A. (2020) · Biotechnology Reports · doi:10.1016/j.btre.2020.e00570 · Cited by 1,132
Dai, Y., Zhang, N., Xing, C., Cui, Q., & Sun, Q. (2019) · Chemosphere · doi:10.1016/j.chemosphere.2019.01.161 · Cited by 935
Review of organic and inorganic pollutants removal by biochar and biochar-based composites
Liang, L., Xi, F., Tan, W., Meng, X., Hu, B., & Wang, X. (2021) · Biochar · doi:10.1007/s42773-021-00101-6 · Cited by 662
“The impregnation method immerses biomass powder in the Fe3+/Fe2+ salt solution or co-precipitate the Fe3+/Fe2+ by chemicals before pyrolysis or microwave heating (Chaukura et al. 2017). In this way, a novel MBC derived from a peanut hull was made by Han et al. (2016) (see Fig. 1b). The obtained MBC had a potential for…”
MethodInfluentialQiu, B., Shao, Q., Shi, J., Yang, C., & Chu, H. (2022) · Separation and Purification Technology · doi:10.1016/j.seppur.2022.121925 · Cited by 646
A green biochar/iron oxide composite for methylene blue removal
Zhang, P., O’Connor, D., Wang, Y., Jiang, L., Xia, T., Wang, L., Tsang, D. C. W., Ok, Y. S., & Hou, D. (2020) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2019.121286 · Cited by 503
Metadata
- Authors
- Chaukura, N., Murimba, E. C., & Gwenzi, W.
- Venue
- Applied Water Science
- Published
- 2016-02-15
- Volume
- 7
- Issue
- 5
- Pages
- 2175-2186
- ISSN
- 2190-5487 (ISSN-L)
- 2190-5495
- OpenAlex
- W2279291981
- Cited by
- 245
- References
- 4
- FWCI
- 6.75
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Synthesis, characterisation and methyl orange adsorption capacity of ferric oxide–biochar nano-composites derived from pulp and paper sludge. https://app.cochat.ai/papers/10.1007/s13201-016-0392-5
- The paper
- Chaukura, N., Murimba, E. C., & Gwenzi, W. (2017). Synthesis, characterisation and methyl orange adsorption capacity of ferric oxide–biochar nano-composites derived from pulp and paper sludge. Applied Water Science. https://doi.org/10.1007/s13201-016-0392-5
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.