MXene Sediment-Based Poly(vinyl alcohol)/Sodium Alginate Aerogel Evaporator with Vertically Aligned Channels for Highly Efficient Solar Steam Generation
Open accessThe DOI matches its Crossref record; 60 of the 60 references it cites were found in a registry or an index.
Abstract
Solar-driven interfacial evaporation from seawater is considered an effective way to alleviate the emerging freshwater crisis because of its green and environmentally friendly characteristics. However, developing an evaporator with high efficiency, stability, and salt resistance remains a key challenge. MXene, with an internal photothermal conversion efficiency of 100%, has received tremendous research interest as a photothermal material. However, the process to prepare the MXene with monolayer is inefficient and generates a large amount of “waste” MXene sediments (MS). Here, MXene sediments is selected as the photothermal material, and a three-dimensional MXene sediments/poly(vinyl alcohol)/sodium alginate aerogel evaporator with vertically aligned pores by directional freezing method is innovatively designed. The vertical porous structure enables the evaporator to improve water transport, light capture, and high evaporation rate. Cotton swabs and polypropylene are used as the water channel and support, respectively, thus fabricating a self-floating evaporator. The evaporator exhibits an evaporation rate of 3.6 kg m−2 h−1 under one-sun illumination, and 18.37 kg m−2 of freshwater is collected in the condensation collection device after 7 h of outdoor sun irradiation. The evaporator also displays excellent oil and salt resistance. This research fully utilizes “waste” MS, enabling a self-floating evaporation device for freshwater collection.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures






Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
X-ray photoelectron spectroscopy of select multi-layered transition metal carbides (MXenes)
Halim, J., Cook, K. M., Naguib, M., Eklund, P., Gogotsi, Y., Rosen, J., & Barsoum, M. W. (2016) · Applied Surface Science · doi:10.1016/j.apsusc.2015.11.089 · Cited by 2,047 · cited 1×
“3 [38].”
Li, X., Xu, W., Tang, M., Zhou, L., Zhu, B., Zhu, S., & Zhu, J. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1613031113 · Cited by 1,246 · cited 1×
“To overcome this challenge, the team headed Zhu developed two dimensional (2D) water channels that reduce heat loss by decreasing its dimensionality and volume [19].”
MethodWater scarcity assessments in the past, present, and future
Liu, J., Yang, H., Gosling, S. N., Kummu, M., Flörke, M., Pfister, S., Hanasaki, N., Wada, Y., Zhang, X., Zheng, C., et al. (2017) · Earth's Future · doi:10.1002/2016ef000518 · Cited by 1,134 · cited 1×
“Traditional desalination technologies such as low-temperature multi-effect distillation (LT-MED), multi-stage flash evaporator, reverse osmosis, and electrodialysis have disadvantages such as pipeline scaling, low efficiency, high energy consumption, and large footprint [2–4].”
BackgroundSelf-citationArchitecting highly hydratable polymer networks to tune the water state for solar water purification
Zhou, X., Zhao, F., Guo, Y., Rosenberger, B., & Yu, G. (2019) · Science Advances · doi:10.1126/sciadv.aaw5484 · Cited by 1,084 · cited 2×
“The entire system can work together to attain the equilibrium of high-concentration salt solutions and inhibit the precipitation of salt crystals [40].”
BackgroundBae, K., Kang, G., Cho, S. K., Park, W., Kim, K., & Padilla, W. J. (2015) · Nature Communications · doi:10.1038/ncomms10103 · Cited by 1,014 · cited 1×
“These mainly include semiconductors [21], metal nanoparticles [22], carbon matrix composites [23], and organic conjugated polymers [24].”
BackgroundEmerging 2D MXenes for supercapacitors: status, challenges and prospects
Hu, M., Zhang, H., Hu, T., Fan, B., Wang, X., & Li, Z. (2020) · Chemical Society Reviews · doi:10.1039/d0cs00175a · Cited by 828 · cited 1×
“These sediments consist of unetched Ti 3 AlC 2 (MAX), unexfoliated multilayered MXene (m-MXene), and a small amount of residual monolayer/ oligolayer MXene [32, 33].”
BackgroundSelf-citationWu, L., Dong, Z., Cai, Z., Ganapathy, T., Fang, N. X., Li, C., Yu, C., Zhang, Y., & Song, Y. (2020) · Nature Communications · doi:10.1038/s41467-020-14366-1 · Cited by 803 · cited 1×
“It is now one of the effective methods to solve the global of water scarcity [9].”
MethodBiomass‐Derived Hybrid Hydrogel Evaporators for Cost‐Effective Solar Water Purification
Guo, Y., Lu, H., Zhao, F., Zhou, X., Shi, W., & Yu, G. (2020) · Advanced Materials · doi:10.1002/adma.201907061 · Cited by 791 · cited 1×
“There has been a wide range of development in the materials used for interface solar evaporators, including nanofiber membranes [11], fabrics [12], sponges [13], hydrogels [14], and aerogels [15].”
BackgroundEnhancement of Interfacial Solar Vapor Generation by Environmental Energy
Li, X., Li, J., Lu, J., Xu, N., Chen, C., Min, X., Zhu, B., Li, H., Zhou, L., Zhu, S., et al. (2018) · Joule · doi:10.1016/j.joule.2018.04.004 · Cited by 790 · cited 1×
“These systems minimize heat loss by positioning solar energy on an evaporator surface made of photothermal materials [5–7].”
BackgroundA 3D Photothermal Structure toward Improved Energy Efficiency in Solar Steam Generation
Shi, Y., Li, R., Jin, Y., Zhuo, S., Shi, L., Chang, J., Hong, S., Ng, K.-C., & Wang, P. (2018) · Joule · doi:10.1016/j.joule.2018.03.013 · Cited by 772 · cited 1×
“The photothermal mechanism can be categorized into electron–hole generation and relaxation [6], plasma localized heating, and molecular thermal vibration [25].”
BackgroundZhu, L., Gao, M., Peh, C. K. N., Wang, X., & Ho, G. W. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702149 · Cited by 655 · cited 1×
“These systems minimize heat loss by positioning solar energy on an evaporator surface made of photothermal materials [5–7].”
BackgroundSelf-citationGu, W., Sheng, J., Huang, Q., Wang, G., Chen, J., & Ji, G. (2021) · Nano-Micro Letters · doi:10.1007/s40820-021-00635-1 · Cited by 568 · cited 1×
“The lower thermal conductivity signifies that the aerogel developed in this research boasts excellent thermal insulation, promoting the establishment of “localized heating” during the evaporation process [43, 44].”
BackgroundPorous Cryo-Dried MXene for Efficient Capacitive Deionization
Bao, W., Tang, X., Guo, X., Choi, S., Wang, C., Gogotsi, Y., & Wang, G. (2018) · Joule · doi:10.1016/j.joule.2018.02.018 · Cited by 454 · cited 1×
“These enlarged pores create favorable conditions for water transmission and heat radiation conduction inside the evaporator, contributing to the increase in the evap-oration volume [45].”
BackgroundZhang, Q., Yi, G., Fu, Z., Yu, H., Chen, S., & Quan, X. (2019) · ACS Nano · doi:10.1021/acsnano.9b06180 · Cited by 420
Li, Y., Gao, T., Yang, Z., Chen, C., Kuang, Y., Song, J., Jia, C., Hitz, E. M., Yang, B., & Hu, L. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.09.034 · Cited by 416 · cited 1×
“One such example is the research by Li et al. [20], in which they combined a 1D water channel structure with polystyrene in a jellyfish-like solar evaporator.”
MethodThe revival of thermal utilization from the Sun: interfacial solar vapor generation
Zhou, L., Li, X., Ni, G. W., Zhu, S., & Zhu, J. (2019) · National Science Review · doi:10.1093/nsr/nwz030 · Cited by 412 · cited 1×
“This increases the efficiency of photothermal conversion and improves the evaporation rate of the desalination evaporator, resulting in low energy consumption [8], pollution-free, and convenient desalination technology.”
BackgroundConstruction of 3D Skeleton for Polymer Composites Achieving a High Thermal Conductivity
Yao, Y., Sun, J., Zeng, X., Sun, R., Xu, J., & Wong, C. (2018) · Small · doi:10.1002/smll.201704044 · Cited by 389 · cited 1×
“This occurrence could be attributed to the unidirectional growth of ice crystals during freezing, where MS sheets were vertically arranged with the direction of ice crystal growth by mechanically shearing the MS disk-like layered liquid crystal phase [36].”
BackgroundEmerging desalination technologies: Current status, challenges and future trends
Ahmed, F. E., Khalil, A., & Hilal, N. (2021) · Desalination · doi:10.1016/j.desal.2021.115183 · Cited by 331
Jiang, Q., Gholami Derami, H., Ghim, D., Cao, S., Jun, Y.-S., & Singamaneni, S. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta04834c · Cited by 322 · cited 1×
“These mainly include semiconductors [21], metal nanoparticles [22], carbon matrix composites [23], and organic conjugated polymers [24].”
BackgroundMultifunctional MXene/C Aerogels for Enhanced Microwave Absorption and Thermal Insulation
Wu, F., Hu, P., Hu, F., Tian, Z., Tang, J., Zhang, P., Pan, L., Barsoum, M. W., Cai, L., & Sun, Z. (2023) · Nano-Micro Letters · doi:10.1007/s40820-023-01158-7 · Cited by 314 · cited 1×
“The lower thermal conductivity signifies that the aerogel developed in this research boasts excellent thermal insulation, promoting the establishment of “localized heating” during the evaporation process [43, 44].”
BackgroundLei, Z., Sun, X., Zhu, S., Dong, K., Liu, X., Wang, L., Zhang, X., Qu, L., & Zhang, X. (2022) · Nano-Micro Letters · doi:10.1007/s40820-021-00748-7 · Cited by 305 · cited 1×
“Significantly, the MS on the surface of aerogel can either induce light reflection or transmission while efficiently absorbing the internal light into the vertically arranged channels [39].”
BackgroundSelf-citationPotential of MXenes in Water Desalination: Current Status and Perspectives
Ihsanullah, I. (2020) · Nano-Micro Letters · doi:10.1007/s40820-020-0411-9 · Cited by 281 · cited 1×
“The 2D nanomaterial MXene has the advantages of good mechanical stability [26], variety, adjustable thermal radiation loss, and easy control of optical properties [27–31].”
BackgroundLin, Z., Liu, J., Peng, W., Zhu, Y., Zhao, Y., Jiang, K., Peng, M., & Tan, Y. (2020) · ACS Nano · doi:10.1021/acsnano.9b08832 · Cited by 280 · cited 1×
“These sediments consist of unetched Ti 3 AlC 2 (MAX), unexfoliated multilayered MXene (m-MXene), and a small amount of residual monolayer/ oligolayer MXene [32, 33].”
BackgroundMa, W., Lu, T., Cao, W., Xiong, R., & Huang, C. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202214157 · Cited by 216 · cited 1×
“There has been a wide range of development in the materials used for interface solar evaporators, including nanofiber membranes [11], fabrics [12], sponges [13], hydrogels [14], and aerogels [15].”
Background3D macroscopic graphene oxide/MXene architectures for multifunctional water purification
Ming, X., Guo, A., Zhang, Q., Guo, Z., Yu, F., Hou, B., Wang, Y., Homewood, K. P., & Wang, X. (2020) · Carbon · doi:10.1016/j.carbon.2020.06.023 · Cited by 213
Self-citationAdvances in carbon nanostructure–silica aerogel composites: a review
Lamy-Mendes, A., Silva, R. F., & Durães, L. (2018) · Journal of Materials Chemistry A · doi:10.1039/c7ta08959g · Cited by 212 · cited 1×
“This property gives them high mechanical strength [17].”
BackgroundGraphene-based Recyclable Photo-Absorbers for High-Efficiency Seawater Desalination
Wang, X., Ou, G., Wang, N., & Wu, H. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b02071 · Cited by 208 · cited 1×
“These mainly include semiconductors [21], metal nanoparticles [22], carbon matrix composites [23], and organic conjugated polymers [24].”
BackgroundSelf-citationHan, X., Ding, S., Fan, L., Zhou, Y., & Wang, S. (2021) · Journal of Materials Chemistry A · doi:10.1039/d1ta04991g · Cited by 181 · cited 1×
“This significant improvement can be attributed to its well-integrated structure, excellent thermal confinement, and timely upward water convection.”
BackgroundXu, C., Gao, M., Yu, X., Zhang, J., Cheng, Y., & Zhu, M. (2023) · Nano-Micro Letters · doi:10.1007/s40820-023-01034-4 · Cited by 160 · cited 1×
“In such cases, oil contamination may adhere to the surface of the evaporator, partially obstructing the seawater transmission channels and thereby reducing the actual evaporation performance [60].”
BackgroundYu, Z., & Wu, P. (2020) · Advanced Materials Technologies · doi:10.1002/admt.202000065 · Cited by 158
Hao, D., Yang, Y., Xu, B., & Cai, Z. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.05.117 · Cited by 157 · cited 1×
“There has been a wide range of development in the materials used for interface solar evaporators, including nanofiber membranes [11], fabrics [12], sponges [13], hydrogels [14], and aerogels [15].”
BackgroundLei, Z., Zhu, S., Sun, X., Yu, S., Liu, X., Liang, K., Zhang, X., Qu, L., Wang, L., & Zhang, X. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202205790 · Cited by 157 · cited 1×
“When it comes to interface solar evaporation systems, researchers primarily focus on the selection of evaporator materials, water transmission channels, and evaporator structure design [10].”
BackgroundSelf-citationRecent Advances in Fibrous Materials for Interfacial Solar Steam Generation
Ge, C., Xu, D., Du, H., Chen, Z., Chen, J., Shen, Z., Xu, W., Zhang, Q., & Fang, J. H. (2022) · Advanced Fiber Materials · doi:10.1007/s42765-022-00228-6 · Cited by 135 · cited 1×
“According to formula (1–3), we calculate the evaporation solar-to-vapor energy conversion efficiency ( η ) of PSMS-1 [47–49]: where V n is the net evaporation rate, H lv is the latent heat of the evaporation (J kg −1 ), Q is the sensible heat of water, E i is the energy input by the incident light…”
MethodProgress in interfacial solar steam generation using low-dimensional and biomass-derived materials
Ivan, M. N. A. S., Saha, S., Saleque, A. M., Ahmed, S., Thakur, A. K., Bai, G., Zhang, M., Saidur, R., & Tsang, Y. H. (2023) · Nano Energy · doi:10.1016/j.nanoen.2023.109176 · Cited by 133 · cited 1×
“Consequently, the process of water transportation from bottom to top not only mitigated the influence of heat loss, but also absorbed heat from the environment [41, 42].”
BackgroundTracking the pulse of the Earth’s fresh waters
Ruhí, A., Messager, M., & Olden, J. D. (2018) · Nature Sustainability · doi:10.1038/s41893-018-0047-7 · Cited by 129 · cited 1×
“As the world’s population steadily increases, the demand for freshwater resources is also on the rise; however, only 0.3% of the world’s freshwater is available for direct human consumption [1].”
BackgroundInfluentialHeat generation and conduction in PDMS-carbon nanoparticle membranes irradiated with optical fibers
Vélez-Cordero, J. R., & Hernández-Cordero, J. A. (2015) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2015.04.009 · Cited by 120 · cited 1×
“The photothermal mechanism can be categorized into electron–hole generation and relaxation [6], plasma localized heating, and molecular thermal vibration [25].”
BackgroundBioencapsulated MXene Flakes for Enhanced Stability and Composite Precursors
Krecker, M. C., Bukharina, D., Hatter, C. B., Gogotsi, Y. G., & Tsukruk, V. V. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202004554 · Cited by 114
Wu, F., Qiang, S., Zhu, X., Jiao, W., Liu, L., Yu, J., Liu, Y., & Ding, B. (2023) · Nano-Micro Letters · doi:10.1007/s40820-023-01030-8 · Cited by 107 · cited 2×
“Aerogel-based materials is increasingly popular for use in solar steam applications due to their high porosity, which prevents the collapse of three-dimensional (3D) structures by trapping gas in the polymer network [16].”
BackgroundYang, Y., Fan, W., Yuan, S., Tian, J., Chao, G., & Liu, T. X. (2021) · Journal of Materials Chemistry A · doi:10.1039/d1ta07225k · Cited by 102
Sun, M., Yang, H., Wang, X., Gao, X., Wang, C., & Ho, S. (2023) · Desalination · doi:10.1016/j.desal.2023.116462 · Cited by 97
Self-citationYuan, M., Wang, L., Liu, X., Du, X., Zhang, G., Chang, Y., Xia, Q., Hu, Q., & Zhou, A. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2022.138686 · Cited by 93 · cited 1×
“Currently, MXene sediments (MS) has been extensively studied in supercapacitors 1 3 [34], electromagnetic shielding, and smart wearables [35].”
BackgroundSelf-citationSandwich-structured MXene/wood aerogel with waste heat utilization for continuous desalination
Gao, H. X., Bing, N., Bao, Z., Xie, H., & Yu, W. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2022.140362 · Cited by 87 · cited 1×
“5i and Table S6), the evaporation rate of the 3D PSMS aerogel evaporator designed in this research is notably higher than that of majority of 3D evaporators reported to date [50–59].”
BackgroundHe, G., Ning, F., Liu, X., Meng, Y., Lei, Z., Ma, X., Tian, M., Liu, X., Zhang, X., Zhang, X., et al. (2023) · Advanced Fiber Materials · doi:10.1007/s42765-023-00348-7 · Cited by 87 · cited 1×
“The 2D nanomaterial MXene has the advantages of good mechanical stability [26], variety, adjustable thermal radiation loss, and easy control of optical properties [27–31].”
BackgroundSelf-citationWaste Egg Tray and Toner-Derived Highly Efficient 3D Solar Evaporator for Freshwater Generation
Ivan, M. N. A. S., Saleque, A. M., Ahmed, S., Cheng, P. K., Qiao, J., Alam, T. I., & Tsang, Y. H. (2022) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c22215 · Cited by 85 · cited 1×
“This facilitates the acquiring of additional energy from the surrounding environment (PSMS-1–0.213 W , more detailed calculation as shown in Note S4) [46].”
BackgroundInfluentialLarge-Area Ti 3 C 2 T x -MXene Coating: Toward Industrial-Scale Fabrication and Molecular Separation
Kim, J. H., Park, G. S., Kim, Y.-J., Choi, E., Kang, J., Kwon, O., Kim, S. J., Cho, J. H., & Kim, D. W. (2021) · ACS Nano · doi:10.1021/acsnano.1c01448 · Cited by 78 · cited 1×
“The 2D nanomaterial MXene has the advantages of good mechanical stability [26], variety, adjustable thermal radiation loss, and easy control of optical properties [27–31].”
BackgroundNovel advances in metal-based solar absorber for photothermal vapor generation
Li, Z., & Wang, C. (2019) · Chinese Chemical Letters · doi:10.1016/j.cclet.2019.09.030 · Cited by 73
Liu, B., Yu, L., Yu, F., & Ma, J. (2020) · Desalination · doi:10.1016/j.desal.2020.114897 · Cited by 70
Aerogels in passive solar thermal desalination: a review
Rastgar, M., Jiang, L., Wang, C., & Sadrzadeh, M. (2022) · Journal of Materials Chemistry A · doi:10.1039/d2ta05216d · Cited by 69 · cited 1×
“Additionally, their high specific surface area, low bulk density, and very low thermal conductivity make them ideal for use in evaporators in interfacial solar evaporation systems [18].”
BackgroundShao, D., Zhang, Q., Wang, L., Wang, Z., Jing, Y.-X., Cao, X., Zhang, F., & Sun, S. (2021) · Journal of Membrane Science · doi:10.1016/j.memsci.2020.119033 · Cited by 66
Self-citationChang, J., Pang, B., Zhang, H., Pang, K., Zhang, M., & Yuan, J. (2023) · Advanced Fiber Materials · doi:10.1007/s42765-023-00345-w · Cited by 63 · cited 1×
“OH groups on PS aerogel [37].”
Efficient steam generation by inexpensive narrow gap evaporation device for solar applications
Morciano, M., Fasano, M., Salomov, U., Ventola, L., Chiavazzo, E., & Asinari, P. (2017) · Scientific Reports · doi:10.1038/s41598-017-12152-6 · Cited by 61 · cited 1×
“These mainly include semiconductors [21], metal nanoparticles [22], carbon matrix composites [23], and organic conjugated polymers [24].”
BackgroundIvan, M. N. A. S., Saleque, A. M., Ahmed, S., Guo, Z. L., Zu, D., Xu, L., Alam, T. I., Hani, S. U., & Tsang, Y. H. (2023) · Journal of Materials Chemistry A · doi:10.1039/d2ta08237c · Cited by 58 · cited 1×
“According to formula (1–3), we calculate the evaporation solar-to-vapor energy conversion efficiency ( η ) of PSMS-1 [47–49]: where V n is the net evaporation rate, H lv is the latent heat of the evaporation (J kg −1 ), Q is the sensible heat of water, E i is the energy input by the incident light…”
Method2D Ferrous Ion‐Crosslinked Ti3C2Tx MXene Aerogel Evaporators for Efficient Solar Steam Generation
Li, X., Li, X., Li, H., Zhao, Y., Li, W., Yan, S., & Yu, Z. (2021) · Advanced Sustainable Systems · doi:10.1002/adsu.202100263 · Cited by 51
Zhang, M., Ivan, M. N. A. S., Sun, Y., Li, Z., Saha, S., Ahmed, S., Liu, H., Wang, Y., Tsang, Y. H., & Wong, W. (2024) · Journal of Materials Chemistry A · doi:10.1039/d3ta07980e · Cited by 51
Janus Carbon Nanotube Sponges for Highly Efficient Solar-Driven Vapor Generation
Wang, C., Zhou, S., Wu, C., Yang, Z., & Zhang, X. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2022.140501 · Cited by 44
Self-citationMaxing Out Water Desalination with MXenes
Malik, R. (2018) · Joule · doi:10.1016/j.joule.2018.04.001 · Cited by 41
Ma, J., Yang, K., Jiang, Y., Shen, L., Ma, H., Cui, Z., Du, Y., Lin, J., Liu, J., & Zhu, N. (2022) · Cell Reports Physical Science · doi:10.1016/j.xcrp.2022.100908 · Cited by 34 · cited 1×
“Currently, MXene sediments (MS) has been extensively studied in supercapacitors 1 3 [34], electromagnetic shielding, and smart wearables [35].”
BackgroundModified Electrospun Membranes Using Different Nanomaterials for Membrane Distillation
Khatri, M., Francis, L., & Hilal, N. (2023) · Membranes · doi:10.3390/membranes13030338 · Cited by 31 · cited 1×
“There has been a wide range of development in the materials used for interface solar evaporators, including nanofiber membranes [11], fabrics [12], sponges [13], hydrogels [14], and aerogels [15].”
BackgroundWang, Y., Wan, Y., Meng, X., Jiang, L., Wei, H., Zhang, X., & Ma, N. (2022) · Journal of Materials Science · doi:10.1007/s10853-022-07494-0 · Cited by 23
Self-citationResearch on Reverse Osmosis Membrane Materials for Seawater Desalination
Wang, J., Lai, S. Y., & He, Y. (2012) · Advanced materials research · doi:10.4028/www.scientific.net/amr.600.100 · Cited by 2 · cited 1×
“Traditional desalination technologies such as low-temperature multi-effect distillation (LT-MED), multi-stage flash evaporator, reverse osmosis, and electrodialysis have disadvantages such as pipeline scaling, low efficiency, high energy consumption, and large footprint [2–4].”
Background
Cited by
Advancing Efficiency in Solar-Driven Interfacial Evaporation: Strategies and Applications
Hou, L., Li, S., Qi, Y., Liu, J., Cui, Z., Liu, X., Zhang, Y., Wang, N., & Zhao, Y. (2025) · ACS Nano · doi:10.1021/acsnano.4c16998 · Cited by 245
Engineered Biomass‐Based Solar Evaporators for Diversified and Sustainable Water Management
Li, W., Xu, Y. G., Liu, K., Zhu, L., Xu, T., Wang, G., & Si, C. (2025) · Advanced Materials · doi:10.1002/adma.202503658 · Cited by 94
Wang, Y., Chen, F., Chen, Q., Liu, W., Huang, Q., Hou, X., Li, S., Cheng, C., Xie, X., Meng, N., et al. (2025) · Nature Communications · doi:10.1038/s41467-025-61244-9 · Cited by 99
Self-citationChen, S., Yang, B., Yang, D., Qiu, X., & Zheng, D. (2025) · ACS Nano · doi:10.1021/acsnano.5c01360 · Cited by 78
Ma, W., Nie, Y., Cao, W., Fan, Q., Wen, J., Zhang, Y., Xiong, R., & Huang, C. (2025) · Chemical Engineering Journal · doi:10.1016/j.cej.2025.165196 · Cited by 74
Metadata
- Authors
- Wang, T., Li, M., Xu, H., Wang, X., Jia, M., Hou, X., Gao, S., Liu, Q., Yang, Q., Tian, M., Qu, L., Song, Z., Wu, X., Wang, L., & Zhang, X.
- Affiliations
- Qingdao University (CN)
- Qingdao University of Science and Technology (CN)
- Shandong Institute of Advanced Technology (CN)
- Corresponding author
- Song, Zhenhua
- Wu, Xiaohu
- Wang, Lili
- Zhang, Xiansheng
- Venue
- Nano-Micro Letters
- Published
- 2024-06-17
- Volume
- 16
- Issue
- 1
- Pages
- 220-220
- ISSN
- 2150-5551 (ISSN-L)
- 2311-6706
- PMC
- PMC11183014
- OpenAlex
- W4399748824
- Semantic Scholar
- 6e19187c4cac3eec97bc940fc9b464f65abe04ce
- Cited by
- 118
- References
- 60
- Citations by year
- 2026: 52 · 2025: 61 · 2024: 5
- FWCI
- 7.85
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- cc-by
- creativecommons.org/licenses/by/4.0 (tdm)
- creativecommons.org/licenses/by/4.0 (vor)
- Locations
- Nano-Micro Letters (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion)
- Funders
- National Natural Science Foundation of China (52003131)
- China Postdoctoral Science Foundation (2023 M731838)
- Topics
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Solar-Powered Water Purification Methods
- Physical Sciences › Materials Science › Materials Chemistry › MXene and MAX Phase Materials
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Solar Thermal and Photovoltaic Systems
- Keywords
- solar steam generation, interfacial evaporation, seawater desalination, polyvinyl alcohol, sodium alginate, directional freezing, photothermal materials, freshwater collection
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.