The DOI matches its Crossref record; 8 of the 8 references it cites were found in a registry or an index.
Ionic Liquids and Deep-Eutectic Solvents in Extractive Metallurgy: Mismatch Between Academic Research and Industrial Applicability
Open accessAbstract
The past 10–20 years have seen numerous academic papers describing the benefits of ionic liquids (ILs) and deep-eutectic solvents (DESs) for leaching, solvent extraction and electrowinning. The scientific community—including the authors of this opinion article—have frequently proclaimed these neoteric solvents as game-changers in extractive metallurgy. Despite this, there have been no commercial breakthroughs. In this paper we reflect on the reasons why ILs and DESs seem to have failed to impact on the metallurgical industry. These include: (1) issues with high viscosity; (2) limited chemical stability under the conditions of metallurgical processes; (3) difficulties with recycling and reuse; (4) a lack of demonstrated unit processes and flowsheets on the pilot scale; (5) insufficient material-property data available for engineering purposes; (6) the administrative burden of obtaining licenses and safety permits; (7) very high costs for large-scale operations; and (8) minimal added value compared to state-of-the-art hydrometallurgical processes. Our belief is that innovations in hydrometallurgy based on ILs or DESs are unlikely. Instead, we should be aiming for a deeper understanding of hydrometallurgical processes at the molecular level. This is because advances are more likely to derive from the refocused efforts of experienced IL/DES researchers investigating the speciation and chemical thermodynamics of hydrometallurgical solutions, which will then hasten the transition from linear to low-energy-input, circular hydrometallurgy. Graphical Abstract
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Deep Eutectic Solvents (DESs) and Their Applications
Smith, E. L., Abbott, A. P., & Ryder, K. S. (2014) · Chemical Reviews · doi:10.1021/cr300162p · Cited by 7,378
Abbott, A. P., Capper, G., Davies, D. L., Rasheed, R. K., & Tambyrajah, V. (2003) · Chemical Communications · doi:10.1039/b210714g · Cited by 5,738
Applications of ionic liquids in the chemical industry
Plechkova, N. V., & Seddon, K. R. (2008) · Chem. Soc. Rev. · doi:10.1039/b006677j · Cited by 5,686
Deep eutectic solvents: syntheses, properties and applications
Zhang, Q., De Oliveira Vigier, K., Royer, S., & Jérôme, F. (2012) · Chemical Society Reviews · doi:10.1039/c2cs35178a · Cited by 4,899 · cited 1×
“By far the most often-used quaternary ammonium salt is choline chloride, because it is produced in large quantities (chicken feed additive), is relatively cheap, has a low toxicity and it is biodegradable [20, 59].”
BackgroundDeep eutectic solvents: A review of fundamentals and applications
Hansen, B. B., Spittle, S., Chen, B., Poe, D., Zhang, Y., Klein, J. M., Horton, A., Adhikari, L., Zelovich, T., Doherty, B. W., et al. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00385 · Cited by 3,422 · cited 1×
“Several types of DESs are known, but the most relevant type are DESs that are formed by mixing quaternary ammonium chlorides with a hydrogen-bond donor (HBD) (so-called Type III DESs) [58].”
BackgroundInfluence of chloride, water, and organic solvents on the physical properties of ionic liquids
Seddon, K. R., Stark, A., & Torres, M.-J. (2000) · Pure and Applied Chemistry · doi:10.1351/pac200072122275 · Cited by 2,293
Low-transition-temperature mixtures (LTTMs): A new generation of designer solvents
Francisco, M., van den Bruinhorst, A., & Kroon, M. C. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201207548 · Cited by 1,378
Electrodes for generation of hydrogen and oxygen from seawater
BENNETT, J. (1980) · International Journal of Hydrogen Energy · doi:10.1016/0360-3199(80)90021-x · Cited by 311
Metadata
- Authors
- Binnemans, K., & Jones, P. T.
- Venue
- Journal of Sustainable Metallurgy
- Published
- 2023-04-17
- Volume
- 9
- Issue
- 2
- Pages
- 423-438
- ISSN
- 2199-3823 (ISSN-L)
- 2199-3831
- OpenAlex
- W4366086060
- Cited by
- 185
- References
- 8
- FWCI
- 18.19
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Ionic Liquids and Deep-Eutectic Solvents in Extractive Metallurgy: Mismatch Between Academic Research and Industrial Applicability. https://app.cochat.ai/papers/10.1007/s40831-023-00681-6
- The paper
- Binnemans, K., & Jones, P. T. (2023). Ionic Liquids and Deep-Eutectic Solvents in Extractive Metallurgy: Mismatch Between Academic Research and Industrial Applicability. Journal of Sustainable Metallurgy. https://doi.org/10.1007/s40831-023-00681-6
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.