The DOI matches its Crossref record; 56 of the 56 references it cites were found in a registry or an index.
A deep learning-based model for defect detection in laser-powder bed fusion using in-situ thermographic monitoring
Open accessAbstract
Additive manufacturing of metal components with laser-powder bed fusion is a very complex process, since powder has to be melted and cooled in each layer to produce a part. Many parameters influence the printing process; however, defects resulting from suboptimal parameter settings are usually detected after the process. To detect these defects during the printing, different process monitoring techniques such as melt pool monitoring or off-axis infrared monitoring have been proposed. In this work, we used a combination of thermographic off-axis imaging as data source and deep learning-based neural network architectures, to detect printing defects. For the network training, a k-fold cross validation and a hold-out cross validation were used. With these techniques, defects such as delamination and splatter can be recognized with an accuracy of 96.80%. In addition, the model was evaluated with computing class activation heatmaps. The architecture is very small and has low computing costs, which means that it is suitable to operate in real time even on less powerful hardware.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Deep Residual Learning for Image Recognition
He, K., Zhang, X., Ren, S., & Sun, J. (2016) · 2016 IEEE Conference on Computer Vision and Pattern Recognition (CVPR) · doi:10.1109/cvpr.2016.90 · Cited by 235,474
ImageNet classification with deep convolutional neural networks
Krizhevsky, A., Sutskever, I., & Hinton, G. E. (2017) · Communications of the ACM · doi:10.1145/3065386 · Cited by 112,155
LeCun, Y., Bengio, Y., & Hinton, G. (2015) · Nature · doi:10.1038/nature14539 · Cited by 84,126
Gradient-based learning applied to document recognition
Lecun, Y., Bottou, L., Bengio, Y., & Haffner, P. (1998) · Proceedings of the IEEE · doi:10.1109/5.726791 · Cited by 58,805
Densely Connected Convolutional Networks
Huang, G., Liu, Z., Van Der Maaten, L., & Weinberger, K. Q. (2017) · 2017 IEEE Conference on Computer Vision and Pattern Recognition (CVPR) · doi:10.1109/cvpr.2017.243 · Cited by 48,566
Going deeper with convolutions
Szegedy, C., Liu, W., Jia, Y., Sermanet, P., Reed, S., Anguelov, D., Erhan, D., Vanhoucke, V., & Rabinovich, A. (2015) · 2015 IEEE Conference on Computer Vision and Pattern Recognition (CVPR) · doi:10.1109/cvpr.2015.7298594 · Cited by 48,562
ImageNet Large Scale Visual Recognition Challenge
Russakovsky, O., Deng, J., Su, H., Krause, J., Satheesh, S., Ma, S., Huang, Z., Karpathy, A., Khosla, A., Bernstein, M., et al. (2015) · International Journal of Computer Vision · doi:10.1007/s11263-015-0816-y · Cited by 39,380
Histograms of Oriented Gradients for Human Detection
Dalal, N., & Triggs, B. (2005) · 2005 IEEE Computer Society Conference on Computer Vision and Pattern Recognition (CVPR'05) · doi:10.1109/cvpr.2005.177 · Cited by 33,584
MobileNetV2: Inverted Residuals and Linear Bottlenecks
Sandler, M., Howard, A., Zhu, M., Zhmoginov, A., & Chen, L.-C. (2018) · 2018 IEEE/CVF Conference on Computer Vision and Pattern Recognition · doi:10.1109/cvpr.2018.00474 · Cited by 28,755
Batch Normalization: Accelerating Deep Network Training by Reducing Internal Covariate Shift
Ioffe, S., & Szegedy, C. (2015) · arXiv · doi:10.48550/arxiv.1502.03167 · Cited by 27,818
Cited by
Chowdhury, S., Yadaiah, N., Prakash, C., Ramakrishna, S., Dixit, S., Gupta, L. R., & Buddhi, D. (2022) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2022.07.121 · Cited by 784
Research and application of machine learning for additive manufacturing
Qin, J., Hu, F., Liu, Y., Witherell, P., Wang, C. C. L., Rosen, D. W., Simpson, T. W., Lu, Y., & Tang, Q. (2022) · Additive Manufacturing · doi:10.1016/j.addma.2022.102691 · Cited by 391
Image-Based Surface Defect Detection Using Deep Learning: A Review
Bhatt, P. M., Malhan, R. K., Rajendran, P., Shah, B. C., Thakar, S., Yoon, Y. J., & Gupta, S. K. (2021) · Journal of Computing and Information Science in Engineering · doi:10.1115/1.4049535 · Cited by 362
Progress and Opportunities for Machine Learning in Materials and Processes of Additive Manufacturing
Ng, W. L., Goh, G. L., Goh, G. D., Ten, J. S. J., & Yeong, W. Y. (2024) · Advanced Materials · doi:10.1002/adma.202310006 · Cited by 339
Paraskevoudis, K., Karayannis, P., & Koumoulos, E. P. (2020) · Processes · doi:10.3390/pr8111464 · Cited by 189
Metadata
- Authors
- Baumgartl, H., Tomas, J., Buettner, R., & Merkel, M.
- Venue
- Progress in Additive Manufacturing
- Published
- 2020-02-18
- Volume
- 5
- Issue
- 3
- Pages
- 277-285
- ISSN
- 2363-9512 (ISSN-L)
- 2363-9520
- OpenAlex
- W3006730468
- Cited by
- 268
- References
- 56
- FWCI
- 18.98
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A deep learning-based model for defect detection in laser-powder bed fusion using in-situ thermographic monitoring. https://app.cochat.ai/papers/10.1007/s40964-019-00108-3
- The paper
- Baumgartl, H., Tomas, J., Buettner, R., & Merkel, M. (2020). A deep learning-based model for defect detection in laser-powder bed fusion using in-situ thermographic monitoring. Progress in Additive Manufacturing. https://doi.org/10.1007/s40964-019-00108-3
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.