The DOI matches its Crossref record; 56 of the 56 references it cites were found in a registry or an index.
A deep learning-based model for defect detection in laser-powder bed fusion using in-situ thermographic monitoring
Open accessAbstract
Additive manufacturing of metal components with laser-powder bed fusion is a very complex process, since powder has to be melted and cooled in each layer to produce a part. Many parameters influence the printing process; however, defects resulting from suboptimal parameter settings are usually detected after the process. To detect these defects during the printing, different process monitoring techniques such as melt pool monitoring or off-axis infrared monitoring have been proposed. In this work, we used a combination of thermographic off-axis imaging as data source and deep learning-based neural network architectures, to detect printing defects. For the network training, a k-fold cross validation and a hold-out cross validation were used. With these techniques, defects such as delamination and splatter can be recognized with an accuracy of 96.80%. In addition, the model was evaluated with computing class activation heatmaps. The architecture is very small and has low computing costs, which means that it is suitable to operate in real time even on less powerful hardware.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Deep Residual Learning for Image Recognition
He, K., Zhang, X., Ren, S., & Sun, J. (2016) · 2016 IEEE Conference on Computer Vision and Pattern Recognition (CVPR) · doi:10.1109/cvpr.2016.90 · Cited by 235,474
ImageNet classification with deep convolutional neural networks
Krizhevsky, A., Sutskever, I., & Hinton, G. E. (2017) · Communications of the ACM · doi:10.1145/3065386 · Cited by 112,155
LeCun, Y., Bengio, Y., & Hinton, G. (2015) · Nature · doi:10.1038/nature14539 · Cited by 84,126
Gradient-based learning applied to document recognition
Lecun, Y., Bottou, L., Bengio, Y., & Haffner, P. (1998) · Proceedings of the IEEE · doi:10.1109/5.726791 · Cited by 58,805
Densely Connected Convolutional Networks
Huang, G., Liu, Z., Van Der Maaten, L., & Weinberger, K. Q. (2017) · 2017 IEEE Conference on Computer Vision and Pattern Recognition (CVPR) · doi:10.1109/cvpr.2017.243 · Cited by 48,566
Going deeper with convolutions
Szegedy, C., Liu, W., Jia, Y., Sermanet, P., Reed, S., Anguelov, D., Erhan, D., Vanhoucke, V., & Rabinovich, A. (2015) · 2015 IEEE Conference on Computer Vision and Pattern Recognition (CVPR) · doi:10.1109/cvpr.2015.7298594 · Cited by 48,562
ImageNet Large Scale Visual Recognition Challenge
Russakovsky, O., Deng, J., Su, H., Krause, J., Satheesh, S., Ma, S., Huang, Z., Karpathy, A., Khosla, A., Bernstein, M., et al. (2015) · International Journal of Computer Vision · doi:10.1007/s11263-015-0816-y · Cited by 39,380
Histograms of Oriented Gradients for Human Detection
Dalal, N., & Triggs, B. (2005) · 2005 IEEE Computer Society Conference on Computer Vision and Pattern Recognition (CVPR'05) · doi:10.1109/cvpr.2005.177 · Cited by 33,584
MobileNetV2: Inverted Residuals and Linear Bottlenecks
Sandler, M., Howard, A., Zhu, M., Zhmoginov, A., & Chen, L.-C. (2018) · 2018 IEEE/CVF Conference on Computer Vision and Pattern Recognition · doi:10.1109/cvpr.2018.00474 · Cited by 28,755
Batch Normalization: Accelerating Deep Network Training by Reducing Internal Covariate Shift
Ioffe, S., & Szegedy, C. (2015) · arXiv · doi:10.48550/arxiv.1502.03167 · Cited by 27,818 · cited 1×
“These feature maps are then passed through a non-linearity function like ReLU [49], a batch-normalization layer [50], convolutional layer, and a pooling layer [48].”
MethodGrad-CAM: Visual Explanations from Deep Networks via Gradient-Based Localization
Selvaraju, R. R., Cogswell, M., Das, A., Vedantam, R., Parikh, D., & Batra, D. (2017) · 2017 IEEE International Conference on Computer Vision (ICCV) · doi:10.1109/iccv.2017.74 · Cited by 24,513
Xception: Deep Learning with Depthwise Separable Convolutions
Chollet, F. (2017) · 2017 IEEE Conference on Computer Vision and Pattern Recognition (CVPR) · doi:10.1109/cvpr.2017.195 · Cited by 20,380
SURF: Speeded Up Robust Features
Bay, H., Tuytelaars, T., & Van Gool, L. (2006) · Lecture Notes in Computer Science · doi:10.1007/11744023_32 · Cited by 14,955 · cited 1×
“In the first step, the so-called feature engineering, one tries to extract relevant data representations from the raw image data, using various algorithms, such as HOG [44], SURF [45], or HOUP [46].”
Method(2010) · International Conference on Machine Learning · Cited by 13,995
TensorFlow: A system for large-scale machine learning
Abadi, M., Barham, P., Chen, J., Chen, Z., Davis, A., Dean, J., Devin, M., Ghemawat, S., Irving, G., Isard, M., et al. (2016) · arXiv (Cornell University) · doi:10.48550/arxiv.1605.08695 · Cited by 11,822
How transferable are features in deep neural networks?
Yosinski, J., Clune, J., Bengio, Y., & Lipson, H. (2014) · arXiv · doi:10.48550/arxiv.1411.1792 · Cited by 6,061 · cited 2×
“Therefore, convolutional neural networks can convert raw data, such as pixel data from images, into more meaningful data representations, the so-called feature maps, which in turn supports the final classification [43, 47].”
Method(2006) · The MIT Press eBooks · doi:10.7551/mitpress/9780262033589.001.0001 · Cited by 4,280
A survey of cross-validation procedures for model selection
Arlot, S., & Célisse, A. (2010) · LillOA (Université de Lille (University Of Lille)) · Cited by 3,669
A survey of cross-validation procedures for model selection
Arlot, S., & Celisse, A. (2010) · Statistics Surveys · doi:10.1214/09-ss054 · Cited by 3,522
Gibson, I., Rosen, D., & Stucker, B. (2015) · doi:10.1007/978-1-4939-2113-3 · Cited by 3,299
The status, challenges, and future of additive manufacturing in engineering
Gao, W., Zhang, Y., Ramanujan, D., Ramani, K., Chen, Y., Williams, C. B., Wang, C. C. L., Shin, Y. C., Zhang, S., & Zavattieri, P. D. (2015) · Computer-Aided Design · doi:10.1016/j.cad.2015.04.001 · Cited by 2,631
The metallurgy and processing science of metal additive manufacturing
Sames, W. J., List, F. A., Pannala, S., Dehoff, R. R., & Babu, S. S. (2016) · International Materials Reviews · doi:10.1080/09506608.2015.1116649 · Cited by 2,529
Supervised and Unsupervised Discretization of Continuous Features
Dougherty, J., Kohavi, R., & Sahami, M. (1995) · Machine Learning Proceedings 1995 · doi:10.1016/b978-1-55860-377-6.50032-3 · Cited by 1,936
Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing
Everton, S. K., Hirsch, M., Stravroulakis, P., Leach, R. K., & Clare, A. T. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.01.099 · Cited by 1,469
Semi-Supervised Learning (Chapelle, O. et al., Eds.; 2006) [Book reviews]
Chapelle, O., Scholkopf, B., & Zien, E. (2009) · IEEE Transactions on Neural Networks · doi:10.1109/tnn.2009.2015974 · Cited by 1,066
Gong, H., Rafi, K., Gu, H., Janaki Ram, G. D., Starr, T., & Stucker, B. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.07.147 · Cited by 940
A Review on Process Monitoring and Control in Metal-Based Additive Manufacturing
Tapia, G., & Elwany, A. (2014) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4028540 · Cited by 711
Comparison of density measurement techniques for additive manufactured metallic parts
Spierings, A. B., Schneider, M., & Eggenberger, R. (2011) · Rapid Prototyping Journal · doi:10.1108/13552541111156504 · Cited by 613
Scime, L., & Beuth, J. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2017.11.009 · Cited by 489
Gobert, C., Reutzel, E. W., Petrich, J., Nassar, A. R., & Phoha, S. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.04.005 · Cited by 447
Clijsters, S., Craeghs, T., Buls, S., Kempen, K., & Kruth, J.-P. (2014) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-014-6214-8 · Cited by 437
Shevchik, S. A., Kenel, C., Leinenbach, C., & Wasmer, K. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2017.11.012 · Cited by 403
Porosity prediction: Supervised-learning of thermal history for direct laser deposition
Khanzadeh, M., Chowdhury, S., Marufuzzaman, M., Tschopp, M. A., & Bian, L. (2018) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2018.04.001 · Cited by 338
Defect detection in selective laser melting technology by acoustic signals with deep belief networks
Ye, D., Hong, G. S., Zhang, Y., Zhu, K., & Fuh, J. Y. H. (2018) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-018-1728-0 · Cited by 261
Rashid, R., Masood, S. H., Ruan, D., Palanisamy, S., Rahman Rashid, R. A., & Brandt, M. (2017) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2017.06.023 · Cited by 240
Automatic fault detection for laser powder-bed fusion using semi-supervised machine learning
Okaro, I. A., Jayasinghe, S., Sutcliffe, C., Black, K., Paoletti, P., & Green, P. L. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2019.01.006 · Cited by 219
Design of an Optical system for the In Situ Process Monitoring of Selective Laser Melting (SLM)
Lott, P., Schleifenbaum, H., Meiners, W., Wissenbach, K., Hinke, C., & Bültmann, J. (2011) · Physics Procedia · doi:10.1016/j.phpro.2011.03.085 · Cited by 211
Liu, Q. C., Elambasseril, J., Sun, S. J., Leary, M., Brandt, M., & Sharp, P. K. (2014) · Advanced Materials Research · doi:10.4028/www.scientific.net/amr.891-892.1519 · Cited by 201
Hitzler, L., Merkel, M., Hall, W., & Öchsner, A. (2018) · Advanced Engineering Materials · doi:10.1002/adem.201700658 · Cited by 171
Self-citationBuettner, R., Beil, D., Scholtz, S., & Djemai, A. (2020) · Hawaii International Conference on System Sciences (HICSS) · doi:10.24251/hicss.2020.393 · Cited by 102
Self-citationElectron Beam Freeform Fabrication (EBF3) for Cost Effective Near-Net Shape Manufacturing
Taminger, K. M. B., & Hafley, R. A. (2006) · NASA Technical Reports Server (NASA) · Cited by 88
Efficient machine learning based detection of heart disease
Buettner, R., & Schunter, M. (2019) · IEEE International Conference on e-Health Networking, Applications and Services (Healthcom) · doi:10.1109/healthcom46333.2019.9009429 · Cited by 80
Self-citationMetal Based Additive Layer Manufacturing: Variations, Correlations and Process Control
O’Regan, P., Prickett, P. W., Setchi, R., Hankins, G., & Jones, N. (2016) · Procedia Computer Science · doi:10.1016/j.procs.2016.08.134 · Cited by 67
High-performance exclusion of schizophrenia using a novel machine learning method on EEG data
Buettner, R., Hirschmiller, M., Schlosser, K., Rössle, M., Fernandes, M., & Timm, I. J. (2019) · IEEE International Conference on e-Health Networking, Applications and Services (Healthcom) · doi:10.1109/healthcom46333.2019.9009437 · Cited by 67
Self-citationReal-time Prediction of User Performance based on Pupillary Assessment via Eye-Tracking
Buettner, R., Sauer, S., Maier, C., Eckhardt, A., & Law, G. G. S. O. M. A. (2018) · AIS Transactions on Human-Computer Interaction · doi:10.17705/1thci.00103 · Cited by 65
Self-citationBuettner, R. (2016) · doi:10.13140/rg.2.1.2844.8245 · Cited by 55
Self-citationHistogram of Oriented Uniform Patterns for robust place recognition and categorization
Fazl-Ersi, E., & Tsotsos, J. K. (2012) · The International Journal of Robotics Research · doi:10.1177/0278364911434936 · Cited by 46
Rieg, T., Frick, J., Hitzler, M., & Buettner, R. (2019) · Hawaii International Conference on System Sciences (HICSS) · doi:10.24251/hicss.2019.455 · Cited by 45
Self-citationBuettner, R., Grimmeisen, A., & Gotschlich, A. (2020) · Hawaii International Conference on System Sciences (HICSS) · doi:10.24251/hicss.2020.396 · Cited by 43
Self-citationBaumann, F., Emmert, D., Baumgartl, H., & Buettner, R. (2018) · Procedia Computer Science · doi:10.1016/j.procs.2018.08.078 · Cited by 42
Self-citationBuettner, R., Frick, J., & Rieg, T. (2019) · Journal of the Association for Information Systems · Cited by 38
Self-citationBuettner, R., & Baumgartl, H. (2019) · Hawaii International Conference on System Sciences (HICSS) · doi:10.24251/hicss.2019.081 · Cited by 37
Self-citationMindful Machine Learning: Using Machine Learning Algorithms to Predict the Practice of Mindfulness
Sauer, S., Buettner, R., Heidenreich, T., Lemke, J., van den Berg, C., & Kurz, C. (2016) · European Journal of Psychological Assessment · doi:10.1027/1015-5759/a000312 · Cited by 35
Self-citationBaumgartl, H., & Buettner, R. (2020) · Hawaii International Conference on System Sciences (HICSS) · doi:10.24251/hicss.2020.069 · Cited by 33
Self-citationBuettner, R., Fuhrmann, J., & Kolb, L. (2019) · IEEE International Conference on e-Health Networking, Applications and Services (Healthcom) · doi:10.1109/healthcom46333.2019.9009608 · Cited by 30
Self-citationRobust User Identification Based on Facial Action Units Unaffected by Users' Emotions
Buettner, R. (2018) · Hawaii International Conference on System Sciences (HICSS) · doi:10.24251/hicss.2018.036 · Cited by 25
Self-citation
Cited by
Chowdhury, S., Yadaiah, N., Prakash, C., Ramakrishna, S., Dixit, S., Gupta, L. R., & Buddhi, D. (2022) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2022.07.121 · Cited by 784
Research and application of machine learning for additive manufacturing
Qin, J., Hu, F., Liu, Y., Witherell, P., Wang, C. C. L., Rosen, D. W., Simpson, T. W., Lu, Y., & Tang, Q. (2022) · Additive Manufacturing · doi:10.1016/j.addma.2022.102691 · Cited by 391
Image-Based Surface Defect Detection Using Deep Learning: A Review
Bhatt, P. M., Malhan, R. K., Rajendran, P., Shah, B. C., Thakar, S., Yoon, Y. J., & Gupta, S. K. (2021) · Journal of Computing and Information Science in Engineering · doi:10.1115/1.4049535 · Cited by 362
Progress and Opportunities for Machine Learning in Materials and Processes of Additive Manufacturing
Ng, W. L., Goh, G. L., Goh, G. D., Ten, J. S. J., & Yeong, W. Y. (2024) · Advanced Materials · doi:10.1002/adma.202310006 · Cited by 339
Paraskevoudis, K., Karayannis, P., & Koumoulos, E. P. (2020) · Processes · doi:10.3390/pr8111464 · Cited by 189
Metadata
- Authors
- Baumgartl, H., Tomas, J., Buettner, R., & Merkel, M.
- Venue
- Progress in Additive Manufacturing
- Published
- 2020-02-18
- Volume
- 5
- Issue
- 3
- Pages
- 277-285
- ISSN
- 2363-9512 (ISSN-L)
- 2363-9520
- OpenAlex
- W3006730468
- Cited by
- 268
- References
- 56
- FWCI
- 18.98
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.