Cited by 43Advanced Photocatalysis TechniquesTiO2 Photocatalysis and Solar CellsNanomaterials for catalytic reactions

Waste plastic-derived NiO-MWCNT composite as visible light photocatalyst for degradation of methylene blue dye

Open access
Nath, Abhijit, Shah, Aunggat, Singh, L. Robindro, Mahato, Mrityunjoy·2021·Nanotechnology for Environmental Engineering

Abstract

Low-cost and visible light photocatalysts are essential to achieve industrial-scale photocatalysis. Towards this goal, waste-derived preparation of nanophotocatalysts can be an important direction. Herein, we report waste-derived preparation of nickel oxide–multiwall carbon nanotube (NiO-MWCNT) and its application for visible light photocatalysis to degrade methylene blue (MB) dye. NiO nanoparticle (size ~ 4 nm) was prepared by the coprecipitation method. NiO-MWCNT composite was prepared by thermocatalytic pyrolysis using NiO nanoparticle and high-density polyethylene (HDPE) waste plastic. The average length and diameter of MWCNT were found to be ~ 300 nm and 66 nm, respectively. The NiO-MWCNT composite photocatalyst is found to have a band gap of 3.02 eV along with characteristic CNTs X-ray diffraction (XRD) peak (26.12°), Raman D, G peaks. The decolorization% of MB dye is achieved up to 92.4% using NiO-MWCNT catalyst under 28 W light-emitting diode (LED) visible light within 1 h. The decolorization% for 1 Sun equivalent light exposure is found to be 87.45% within 1 h. A degradation pathway of MB dye has been proposed based on the ESI–MS data leading to the formation of different intermediate fragments of m/z 214, 193, 186, 167, 158, 150, 141, 125, 114, 109, and 102. The study will generate momentum in solar-based industrial-scale photocatalysis for pollutant management and other solar-based chemical transformations.

Integrity signals

Registry

Crossref · 10.1007/s41204-021-00163-8

Cites

70 of 70 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Claims the paper makes

We couldn’t retrieve this paper’s full text, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

  • Catalytic carbonization of high-density polyethylene in a quartz tube furnace at 773 K for 3 h produces carbon nanotubes (Nath et al., 2021).

    “| Catalytic carboni- | High-density | Quartz tube | 773 K, 3 h | Carbon nanotubes - | Nath et al. (2021) | |”

    From Conversion of waste plastics into value-added carbon materials (2023) · cites this paper as Nath et al. (2021)

Cites

Flagged first, then by citations

Cited by

Sorted by citations

Authors
Nath, A., Shah, A., Singh, L. R., & Mahato, M.
Affiliations
North Eastern Hill University (IN)
Corresponding author
Mahato, Mrityunjoy
Venue
Nanotechnology for Environmental Engineering
Published
2021-10-31
Volume
6
Issue
3
ISSN
  • 2365-6379 (ISSN-L)
  • 2365-6387
OpenAlex
W3208267767
Cited by
43
References
70
Citations by year
2026: 5 · 2025: 12 · 2024: 7 · 2023: 9 · 2022: 10
FWCI
1.22
Type
journal article
Language
en
Open access
Locations
Nanotechnology for Environmental Engineering (publishedVersion, cc-by)
Funders
Science and Engineering Research Board (EMR/2016/002634, EMR/2016/004219)
Topics
  • Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Advanced Photocatalysis Techniques
  • Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › TiO2 Photocatalysis and Solar Cells
  • Physical Sciences › Chemistry › Organic Chemistry › Nanomaterials for catalytic reactions
Keywords
nickel oxide nanoparticles, multi-walled carbon nanotubes, visible light photocatalysis, methylene blue degradation, dye decolorization, plastic waste valorization, high-density polyethylene, co-precipitation synthesis, band gap, degradation intermediates

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review