A perspective on 3D bioprinting in tissue regeneration
Open accessThe DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
A rapidly increasing need for organ transplantation and short list of donated organs have led to the development of new materials and technologies for organ manufacturing. Although some simple organs, such as skin and cartilage, have been successfully fabricated and commercialized, it is still difficult to make tissues and organs with high complexity. Engineered tissues have other biomedical applications, such as drug screening models and bio-actuators. Threedimensional (3D) bioprinting has become a great tool to fabricate tissue constructs on demand for transplantation and other biomedical applications [1, 2]. Three-dimensional bioprinting is a computer-assisted technology allowing for spatial control of cells, biomaterials, and soluble factors down to micrometer resolution in a 3D environment. The concept of 3D bioprinting stems from additive manufacturing field where a 3D object is created using sequential deposition of solid layers. Three-dimensional bioprinting has rapidly evolved to fabricate biomimetic structures with great potential for clinical studies. This paper outlines important advances, major challenges, future directions in 3D bioprinting technologies and materials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Sydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L., & Lewis, J. A. (2016) · Nature Materials · doi:10.1038/nmat4544 · Cited by 3,027
Microfluidic Bioprinting of Heterogeneous 3D Tissue Constructs Using Low‐Viscosity Bioink
Colosi, C., Shin, S. R., Manoharan, V., Massa, S., Costantini, M., Barbetta, A., Dokmeci, M. R., Dentini, M., & Khademhosseini, A. (2016) · Advanced Materials · doi:10.1002/adma.201503310 · Cited by 863
Self-citationDirect-write bioprinting of cell-laden methacrylated gelatin hydrogels
Bertassoni, L. E., Cardoso, J. C., Manoharan, V., Cristino, A. L., Bhise, N. S., Araujo, W. A., Zorlutuna, P., Vrana, N. E., Ghaemmaghami, A. M., Dokmeci, M. R., et al. (2014) · Biofabrication · doi:10.1088/1758-5082/6/2/024105 · Cited by 642
Self-citation
Cited by
Bioinks and bioprinting technologies to make heterogeneous and biomimetic tissue constructs
Ashammakhi, N., Ahadian, S., Xu, C., Montazerian, H., Ko, H., Nasiri, R., Barros, N., & Khademhosseini, A. (2019) · Materials Today Bio · doi:10.1016/j.mtbio.2019.100008 · Cited by 549
Self-citationMultifunctional GelMA platforms with nanomaterials for advanced tissue therapeutics
Kurian, A. G., Singh, R. K., Patel, K. D., Lee, J.-H., & Kim, H.-W. (2022) · Bioactive Materials · doi:10.1016/j.bioactmat.2021.06.027 · Cited by 444
Portable hand-held bioprinters promote in situ tissue regeneration
Pazhouhnia, Z., Beheshtizadeh, N., Namini, M. S., & Lotfibakhshaiesh, N. (2022) · Bioengineering & Translational Medicine · doi:10.1002/btm2.10307 · Cited by 60
“As mentioned previously, multiple 3D bioprinting technologies have been appeared and applied to diverse medical applications, ranging from evaluating of the cellular process to regenerating tissues, organoids, and organs for in vivo implantation.(126) The remarkable ability of 3D bioprinter technologies makes a promis…”
BackgroundConstructing biomimetic liver models through biomaterials and vasculature engineering
Lv, W., Zhou, H., Aazmi, A., Yu, M., Xu, X., Yang, H., Huang, Y. Y. S., & Ma, L. (2022) · Regenerative Biomaterials · doi:10.1093/rb/rbac079 · Cited by 45
Metadata
- Authors
- Ahadian, S., & Khademhosseini, A.
- Venue
- Bio-Design and Manufacturing
- Published
- 2018-08-22
- Volume
- 1
- Issue
- 3
- Pages
- 157-160
- ISSN
- 2096-5524 (ISSN-L)
- 2522-8552
- OpenAlex
- W2888034596
- Cited by
- 76
- References
- 3
- FWCI
- 3.40
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A perspective on 3D bioprinting in tissue regeneration. https://app.cochat.ai/papers/10.1007/s42242-018-0020-3
- The paper
- Ahadian, S., & Khademhosseini, A. (2018). A perspective on 3D bioprinting in tissue regeneration. Bio-Design and Manufacturing. https://doi.org/10.1007/s42242-018-0020-3
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.