Thermal design and analysis of a nanosatellite in low earth orbit
Open accessThe DOI matches its Crossref record.
Abstract
In this paper, we present the process and the results of the thermal analysis applied to a nanosatellite developed at Politecnico di Torino. First, main mission parameters and the spacecraft design are presented, in order to fix the boundary conditions and the thermal environment used for the analysis. Then, the thermal model built to solve the thermal balance problem is described into details, and the numerical simulation code is presented. Finally, results are given and discussed in depth. The tool developed provides excellent modelling capabilities and temperature distributions have been validated through commercial software. The analysis has been used to refine the spacecraft configuration and to set the requirements applicable to the thermal control system of the satellite. The results showed that a basically passive control is sufficient to maintain most spacecraft׳s components within their temperature range when appropriate thermal coatings and/or tapes are provided. However, heaters to warm up batteries are recommended to survive coldest conditions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
A Comprehensive Review on Small Satellite Microgrids
Yaqoob, M., Lashab, A., Vasquez, J. C., Guerrero, J. M., Orchard, M. E., & Bintoudi, A. D. (2022) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2022.3175093 · Cited by 93
Analytical and numerical models for thermal related design of a new pico-satellite
Bonnici, M., Mollicone, P., Fenech, M., & Azzopardi, M. A. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.113908 · Cited by 57
Thermal analysis of the SMOG-1 PocketQube satellite
Kovács, R., & Józsa, V. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.05.020 · Cited by 50
“If one wishes to further improve the accuracy of a TN model in a radiation-dominated environment like space, the number of divisions should be increased which provides similar results to that of a FEM simulation [11].”
BackgroundResultFilho, E. M., Seman, L. O., Rigo, C. A., Nicolau, V. D. P., Ovejero, R. G., & Leithardt, V. R. Q. (2020) · Energies · doi:10.3390/en13246691 · Cited by 19
“FloripaSat-I [13], PiCPoT [14], UoMBSat-1 [15], and SMOG-1 [17] are examples of CubeSat missions with thermal simulations.”
BackgroundAn Integrated Thermal-Electrical Model for Simulations of Battery Behavior in CubeSats
Vega Martinez, S., Filho, E. M., Seman, L. O., Bezerra, E. A., Nicolau, V. D. P., Ovejero, R. G., & Leithardt, V. R. Q. (2021) · Applied Sciences · doi:10.3390/app11041554 · Cited by 18
Morsch Filho, E., Nicolau, V. D. P., Paiva, K. V. D., & Possamai, T. S. (2020) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.114859 · Cited by 17
Zheng, C., Qi, J., Song, J., & Cheng, L. (2020) · Numerical Heat Transfer, Part A: Applications · doi:10.1080/10407782.2020.1713634 · Cited by 4
“[33] developed a simulation code in MATLABVR environment and solved the thermal”
Method
Metadata
- Authors
- Corpino, S., Caldera, M., Nichele, F., Masoero, M., & Viola, N.
- Venue
- Acta Astronautica
- Publisher
- Elsevier BV
- Published
- 2015-10
- Volume
- 115
- Pages
- 247-261
- ISSN
- 0094-5765 (ISSN-L)
- OpenAlex
- W235653491
- Cited by
- 125
- References
- 0
- FWCI
- 3.36
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.