The DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index.
Theory of strengthening in fcc high entropy alloys
Open accessAbstract
High Entropy Alloys (HEAs) are a new class of random alloys having impressive strength and toughness. Here, a mechanistic, parameter-free, and predictive theory for the temperature-, composition-, and strain-rate-dependence of the plastic yield strength of fcc HEAs is presented, validated, and applied to understand recent experiments. To first order, each elemental component in the HEA is considered as a solute embedded in the effective matrix of the surrounding alloy. Strengthening is then mainly achieved due to dislocation interactions with the random local concentration fluctuations around the average composition. The theory is validated against molecular simulations on model Fe-Ni-Cr alloys. Hall-Petch-corrected yield strengths in Ni-Co-Fe-Cr-Mn fcc HEM are then predicted using only available experimental information, and good quantitative agreement is achieved. The theory demonstrates the origins of the high strength and detailed trends with composition, materials parameters, temperature, thus identifying the key measurable/calculable material properties needed for design and optimization of fcc HEAs, and is a general model for fcc random alloys. (C) 2016 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Fast Parallel Algorithms for Short-Range Molecular Dynamics
Plimpton, S. (1995) · Journal of Computational Physics · doi:10.1006/jcph.1995.1039 · Cited by 44,721
Visualization and analysis of atomistic simulation data with OVITO–the Open Visualization Tool
Stukowski, A. (2010) · Modelling and Simulation in Materials Science and Engineering · doi:10.1088/0965-0393/18/1/015012 · Cited by 16,608
Hirth, J. P., & Lothe, J. (1968) · Medical Entomology and Zoology · Cited by 9,770
A critical review of high entropy alloys and related concepts
Miracle, D. B., & Senkov, O. N. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.08.081 · Cited by 8,973
Microstructures and properties of high-entropy alloys
Zhang, Y., Zuo, T. T., Tang, Z., Gao, M. C., Dahmen, K. A., Liaw, P. K., & Lu, Z. P. (2014) · Progress in Materials Science · doi:10.1016/j.pmatsci.2013.10.001 · Cited by 7,128
A fracture-resistant high-entropy alloy for cryogenic applications
Gludovatz, B., Hohenwarter, A., Catoor, D., Chang, E. H., George, E. P., & Ritchie, R. O. (2014) · Science · doi:10.1126/science.1254581 · Cited by 5,714
High-Entropy Alloys: A Critical Review
Tsai, M.-H., & Yeh, J.-W. (2014) · Materials Research Letters · doi:10.1080/21663831.2014.912690 · Cited by 3,477
Otto, F., Dlouhý, A., Somsen, C., Bei, H., Eggeler, G., & George, E. P. (2013) · Acta Materialia · doi:10.1016/j.actamat.2013.06.018 · Cited by 3,352
Wu, Z., Bei, H., Pharr, G. M., & George, E. P. (2014) · Acta Materialia · doi:10.1016/j.actamat.2014.08.026 · Cited by 2,134
The theory and properties of randomly disordered crystals and related physical systems
Elliott, R. J., Krumhansl, J. A., & Leath, P. L. (1974) · Reviews of Modern Physics · doi:10.1103/revmodphys.46.465 · Cited by 1,621
A Statistical Theory of Solid Solution Hardening
Labusch, R. (1970) · physica status solidi (b) · doi:10.1002/pssb.19700410221 · Cited by 1,439
Laplanche, G., Kostka, A., Reinhart, C., Hunfeld, J., Eggeler, G., & George, E. P. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.02.036 · Cited by 1,379
Tensile properties of high- and medium-entropy alloys
Gali, A., & George, E. P. (2013) · Intermetallics · doi:10.1016/j.intermet.2013.03.018 · Cited by 1,194
Exploration and Development of High Entropy Alloys for Structural Applications
Miracle, D., Miller, J., Senkov, O., Woodward, C., Uchic, M., & Tiley, J. (2014) · Entropy · doi:10.3390/e16010494 · Cited by 1,012
Strengthening Mechanisms in Crystal Plasticity
Argon, A. (2007) · Oxford University Press eBooks · doi:10.1093/acprof:oso/9780198516002.001.0001 · Cited by 920
Wu, Z., Bei, H., Otto, F., Pharr, G. M., & George, E. P. (2014) · Intermetallics · doi:10.1016/j.intermet.2013.10.024 · Cited by 909
Mechanical Properties and Stacking Fault Energies of NiFeCrCoMn High-Entropy Alloy
Zaddach, A. J., Niu, C., Koch, C. C., & Irving, D. L. (2013) · JOM · doi:10.1007/s11837-013-0771-4 · Cited by 878
Order and Phase Stability in Alloys
Ducastelle, F. (1993) · Springer Series in Solid-State Sciences · doi:10.1007/978-3-642-84968-8_14 · Cited by 702
(1975) · Progress in Materials Science · doi:10.1016/0079-6425(75)90005-5 · Cited by 581
Electronic and thermodynamic criteria for the occurrence of high entropy alloys in metallic systems
Poletti, M. G., & Battezzati, L. (2014) · Acta Materialia · doi:10.1016/j.actamat.2014.04.033 · Cited by 501
Formation of deformation twins in f.c.c. crystals
Mahajan, S. K., & Chin, G. Y. (1973) · Acta Metallurgica · doi:10.1016/0001-6160(73)90085-0 · Cited by 501
Laplanche, G., Gadaud, P., Horst, O., Otto, F., Eggeler, G., & George, E. P. (2015) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2014.11.061 · Cited by 467
Faulkner, J. S. (1982) · Progress in Materials Science · doi:10.1016/0079-6425(82)90005-6 · Cited by 437
Solute strengthening in random alloys
Varvenne, C., Leyson, G. P. M., Ghazisaeidi, M., & Curtin, W. A. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.09.046 · Cited by 427
Self-citationAn atomic-level model for studying the dynamics of edge dislocations in metals
Osetsky, Y. N., & Bacon, D. (2003) · Modelling and Simulation in Materials Science and Engineering · doi:10.1088/0965-0393/11/4/302 · Cited by 422
Yasi, J. A., Hector, L. G., & Trinkle, D. R. (2010) · Acta Materialia · doi:10.1016/j.actamat.2010.06.045 · Cited by 412
Generalized-stacking-fault energy surface and dislocation properties of aluminum
Lu, G., Kioussis, N., Bulatov, V. V., & Kaxiras, E. (2000) · Physical Review B · doi:10.1103/physrevb.62.3099 · Cited by 331
Quantitative prediction of solute strengthening in aluminium alloys
Leyson, G. P. M., Curtin, W. A., Hector, L. G., & Woodward, C. F. (2010) · Nature Materials · doi:10.1038/nmat2813 · Cited by 326
Self-citationInteratomic potential to study plasticity in stainless steels: the FeNiCr model alloy
Bonny, G., Terentyev, D., Pasianot, R. C., Poncé, S., & Bakaev, A. (2011) · Modelling and Simulation in Materials Science and Engineering · doi:10.1088/0965-0393/19/8/085008 · Cited by 272
Johnson, D. D., Nicholson, D. M., Pinski, F. J., Gyorffy, B. L., & Stocks, G. M. (1986) · Physical Review Letters · doi:10.1103/physrevlett.56.2088 · Cited by 249
Rao, S. I., Varvenne, C., Woodward, C., Parthasarathy, T. A., Miracle, D., Senkov, O. N., & Curtin, W. A. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.12.011 · Cited by 236
Self-citationSpin-driven ordering of Cr in the equiatomic high entropy alloy NiFeCrCo
Niu, C., Zaddach, A. J., Oni, A. A., Sang, X., Hurt, J. W., LeBeau, J. M., Koch, C. C., & Irving, D. L. (2015) · Applied Physics Letters · doi:10.1063/1.4918996 · Cited by 225
Average-atom interatomic potential for random alloys
Varvenne, C., Luque, A., Nöhring, W. G., & Curtin, W. A. (2016) · Physical review. B./Physical review. B · doi:10.1103/physrevb.93.104201 · Cited by 197
Self-citationPolycrystalline elastic moduli of a high-entropy alloy at cryogenic temperatures
Haglund, A., Koehler, M., Catoor, D., George, E. P., & Keppens, V. (2015) · Intermetallics · doi:10.1016/j.intermet.2014.11.005 · Cited by 196
Dewald, M., & Curtin, W. A. (2007) · The Philosophical Magazine A Journal of Theoretical Experimental and Applied Physics · doi:10.1080/14786430701297590 · Cited by 140
Self-citationRobust atomistic calculation of dislocation line tension
Szajewski, B. A., Pavia, F., & Curtin, W. A. (2015) · Modelling and Simulation in Materials Science and Engineering · doi:10.1088/0965-0393/23/8/085008 · Cited by 52
Self-citation
Cited by
George, E. P., Raabe, D., & Ritchie, R. O. (2019) · Nature Reviews Materials · doi:10.1038/s41578-019-0121-4 · Cited by 5,047
High entropy alloys: A focused review of mechanical properties and deformation mechanisms
George, E. P., Curtin, W. A., & Tasan, C. C. (2020) · Acta Materialia · doi:10.1016/j.actamat.2019.12.015 · Cited by 1,917
Self-citationMechanical behavior of high-entropy alloys
Li, W., Xie, D., Li, D., Zhang, Y., Gao, Y., & Liaw, P. K. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2021.100777 · Cited by 1,321
Mechanical properties of high-entropy alloys with emphasis on face-centered cubic alloys
Li, Z., Zhao, S., Ritchie, R. O., & Meyers, M. A. (2019) · Progress in Materials Science · doi:10.1016/j.pmatsci.2018.12.003 · Cited by 1,171
Lu, Y., Gao, X., Jiang, L., Chen, Z., Wang, T., Jie, J., Kang, H., Zhang, Y., Guo, S., Ruan, H., et al. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.11.016 · Cited by 1,125
Metadata
- Authors
- Varvenne, C., Luque, A., & Curtin, W. A.
- Venue
- Acta Materialia
- Publisher
- Elsevier BV
- Published
- 2016-10
- Volume
- 118
- Pages
- 164-176
- ISSN
- 1359-6454 (ISSN-L)
- OpenAlex
- W2494442217
- Cited by
- 908
- References
- 36
- FWCI
- 38.66
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.