The DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index.
Theory of strengthening in fcc high entropy alloys
Open accessAbstract
High Entropy Alloys (HEAs) are a new class of random alloys having impressive strength and toughness. Here, a mechanistic, parameter-free, and predictive theory for the temperature-, composition-, and strain-rate-dependence of the plastic yield strength of fcc HEAs is presented, validated, and applied to understand recent experiments. To first order, each elemental component in the HEA is considered as a solute embedded in the effective matrix of the surrounding alloy. Strengthening is then mainly achieved due to dislocation interactions with the random local concentration fluctuations around the average composition. The theory is validated against molecular simulations on model Fe-Ni-Cr alloys. Hall-Petch-corrected yield strengths in Ni-Co-Fe-Cr-Mn fcc HEM are then predicted using only available experimental information, and good quantitative agreement is achieved. The theory demonstrates the origins of the high strength and detailed trends with composition, materials parameters, temperature, thus identifying the key measurable/calculable material properties needed for design and optimization of fcc HEAs, and is a general model for fcc random alloys. (C) 2016 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Fast Parallel Algorithms for Short-Range Molecular Dynamics
Plimpton, S. (1995) · Journal of Computational Physics · doi:10.1006/jcph.1995.1039 · Cited by 44,721
Visualization and analysis of atomistic simulation data with OVITO–the Open Visualization Tool
Stukowski, A. (2010) · Modelling and Simulation in Materials Science and Engineering · doi:10.1088/0965-0393/18/1/015012 · Cited by 16,608
Hirth, J. P., & Lothe, J. (1968) · Medical Entomology and Zoology · Cited by 9,770
A critical review of high entropy alloys and related concepts
Miracle, D. B., & Senkov, O. N. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.08.081 · Cited by 8,973
Microstructures and properties of high-entropy alloys
Zhang, Y., Zuo, T. T., Tang, Z., Gao, M. C., Dahmen, K. A., Liaw, P. K., & Lu, Z. P. (2014) · Progress in Materials Science · doi:10.1016/j.pmatsci.2013.10.001 · Cited by 7,128
A fracture-resistant high-entropy alloy for cryogenic applications
Gludovatz, B., Hohenwarter, A., Catoor, D., Chang, E. H., George, E. P., & Ritchie, R. O. (2014) · Science · doi:10.1126/science.1254581 · Cited by 5,714
High-Entropy Alloys: A Critical Review
Tsai, M.-H., & Yeh, J.-W. (2014) · Materials Research Letters · doi:10.1080/21663831.2014.912690 · Cited by 3,477
Otto, F., Dlouhý, A., Somsen, C., Bei, H., Eggeler, G., & George, E. P. (2013) · Acta Materialia · doi:10.1016/j.actamat.2013.06.018 · Cited by 3,352
Wu, Z., Bei, H., Pharr, G. M., & George, E. P. (2014) · Acta Materialia · doi:10.1016/j.actamat.2014.08.026 · Cited by 2,134
The theory and properties of randomly disordered crystals and related physical systems
Elliott, R. J., Krumhansl, J. A., & Leath, P. L. (1974) · Reviews of Modern Physics · doi:10.1103/revmodphys.46.465 · Cited by 1,621
Cited by
George, E. P., Raabe, D., & Ritchie, R. O. (2019) · Nature Reviews Materials · doi:10.1038/s41578-019-0121-4 · Cited by 5,047
High entropy alloys: A focused review of mechanical properties and deformation mechanisms
George, E. P., Curtin, W. A., & Tasan, C. C. (2020) · Acta Materialia · doi:10.1016/j.actamat.2019.12.015 · Cited by 1,917
Self-citationMechanical behavior of high-entropy alloys
Li, W., Xie, D., Li, D., Zhang, Y., Gao, Y., & Liaw, P. K. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2021.100777 · Cited by 1,321
Mechanical properties of high-entropy alloys with emphasis on face-centered cubic alloys
Li, Z., Zhao, S., Ritchie, R. O., & Meyers, M. A. (2019) · Progress in Materials Science · doi:10.1016/j.pmatsci.2018.12.003 · Cited by 1,171
Lu, Y., Gao, X., Jiang, L., Chen, Z., Wang, T., Jie, J., Kang, H., Zhang, Y., Guo, S., Ruan, H., et al. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.11.016 · Cited by 1,125
Machine learning assisted design of high entropy alloys with desired property
Wen, C., Zhang, Y., Wang, C., Xue, D., Bai, Y., Antonov, S., Dai, L., Lookman, T., & Su, Y. (2019) · Acta Materialia · doi:10.1016/j.actamat.2019.03.010 · Cited by 936
A review on fundamental of high entropy alloys with promising high–temperature properties
Chen, J., Zhou, X., Wang, W., Liu, B., Lv, Y., Yang, W., Xu, D., & Liu, Y. (2018) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2018.05.067 · Cited by 919
Multicomponent high-entropy Cantor alloys
Cantor, B. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100754 · Cited by 877
Choi, W.-M., Jo, Y. H., Sohn, S. S., Lee, S., & Lee, B.-J. (2018) · npj Computational Materials · doi:10.1038/s41524-017-0060-9 · Cited by 794
Tailoring heterogeneities in high-entropy alloys to promote strength–ductility synergy
Ma, E., & Wu, X. (2019) · Nature Communications · doi:10.1038/s41467-019-13311-1 · Cited by 621
Mechanistic origin of high strength in refractory BCC high entropy alloys up to 1900K
Maresca, F., & Curtin, W. A. (2020) · Acta Materialia · doi:10.1016/j.actamat.2019.10.015 · Cited by 508
Self-citationLocal Structure and Short-Range Order in a NiCoCr Solid Solution Alloy
Zhang, F. X., Zhao, S., Jin, K., Xue, H., Velisa, G., Bei, H., Huang, R., Ko, J. Y. P., Pagan, D. C., Neuefeind, J. C., et al. (2017) · Physical Review Letters · doi:10.1103/physrevlett.118.205501 · Cited by 451
Refractory high-entropy alloys: A focused review of preparation methods and properties
Xiong, W., Guo, A. X. Y., Zhan, S., Liu, C.-T., & Cao, S. C. (2023) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2022.08.046 · Cited by 429
Solute strengthening in random alloys
Varvenne, C., Leyson, G. P. M., Ghazisaeidi, M., & Curtin, W. A. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.09.046 · Cited by 427
Self-citationMachine learning for high-entropy alloys: Progress, challenges and opportunities
Liu, X., Zhang, J., & Pei, Z. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2022.101018 · Cited by 397
Vanadium is an optimal element for strengthening in both fcc and bcc high-entropy alloys
Yin, B., Maresca, F., & Curtin, W. A. (2020) · Acta Materialia · doi:10.1016/j.actamat.2020.01.062 · Cited by 338
Self-citationIkeda, Y., Grabowski, B., & Körmann, F. (2019) · Materials Characterization · doi:10.1016/j.matchar.2018.06.019 · Cited by 337
Stacking fault energy in concentrated alloys
Shih, M., Miao, J., Mills, M., & Ghazisaeidi, M. (2021) · Nature Communications · doi:10.1038/s41467-021-23860-z · Cited by 326
Multifunctional High Entropy Alloys Enabled by Severe Lattice Distortion
Wang, H., He, Q., Gao, X., Shang, Y., Zhu, W., Zhao, W., Chen, Z., Gong, H., & Yang, Y. (2024) · Advanced Materials · doi:10.1002/adma.202305453 · Cited by 326
Yield strength and misfit volumes of NiCoCr and implications for short-range-order
Yin, B., Yoshida, S., Tsuji, N., & Curtin, W. A. (2020) · Nature Communications · doi:10.1038/s41467-020-16083-1 · Cited by 311
Self-citationTheory of screw dislocation strengthening in random BCC alloys from dilute to “High-Entropy” alloys
Maresca, F., & Curtin, W. A. (2020) · Acta Materialia · doi:10.1016/j.actamat.2019.10.007 · Cited by 310
Self-citationYe, Y. X., Liu, C. Z., Wang, H., & Nieh, T. G. (2018) · Acta Materialia · doi:10.1016/j.actamat.2018.01.014 · Cited by 295
From high-entropy alloys to complex concentrated alloys
Gorsse, S., Couzinié, J.-P., & Miracle, D. B. (2018) · Comptes Rendus. Physique · doi:10.1016/j.crhy.2018.09.004 · Cited by 293
Solid-solution strengthening in refractory high entropy alloys
Coury, F. G., Kaufman, M., & Clarke, A. J. (2019) · Acta Materialia · doi:10.1016/j.actamat.2019.06.006 · Cited by 290
Engineering atomic-level complexity in high-entropy and complex concentrated alloys
Oh, H. S., Kim, S. J., Odbadrakh, K., Ryu, W. H., Yoon, K. N., Mu, S., Körmann, F., Ikeda, Y., Tasan, C. C., Raabe, D., et al. (2019) · Nature Communications · doi:10.1038/s41467-019-10012-7 · Cited by 289
Okamoto, N. L., Yuge, K., Tanaka, K., Inui, H., & George, E. P. (2016) · AIP Advances · doi:10.1063/1.4971371 · Cited by 274
Unusual dislocation behavior in high-entropy alloys
Ma, E. (2020) · Scripta Materialia · doi:10.1016/j.scriptamat.2020.02.021 · Cited by 261
Wang, S.-P., & Xu, J. (2018) · Intermetallics · doi:10.1016/j.intermet.2018.01.017 · Cited by 258
Complex strengthening mechanisms in the NbMoTaW multi-principal element alloy
Li, X.-G., Chen, C., Zheng, H., Zuo, Y., & Ong, S. P. (2020) · npj Computational Materials · doi:10.1038/s41524-020-0339-0 · Cited by 255
Modeling solid solution strengthening in high entropy alloys using machine learning
Wen, C., Wang, C., Zhang, Y., Antonov, S., Xue, D., Lookman, T., & Su, Y. (2021) · Acta Materialia · doi:10.1016/j.actamat.2021.116917 · Cited by 254
Ghafarollahi, A., & Buehler, M. J. (2025) · MRS Bulletin · doi:10.1557/s43577-025-00953-4 · Cited by 11
Metadata
- Authors
- Varvenne, C., Luque, A., & Curtin, W. A.
- Venue
- Acta Materialia
- Publisher
- Elsevier BV
- Published
- 2016-10
- Volume
- 118
- Pages
- 164-176
- ISSN
- 1359-6454 (ISSN-L)
- OpenAlex
- W2494442217
- Cited by
- 908
- References
- 36
- FWCI
- 38.66
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.