The DOI matches its Crossref record; 25 of the 25 references it cites were found in a registry or an index.
In situ tailoring microstructure in additively manufactured Ti-6Al-4V for superior mechanical performance
Open accessAbstract
The “Holy Grail” of metal additive manufacturing is to manufacture reliable high-performance metal parts with no or a minimal need of post processing. However, Ti-6Al-4V parts made by selective laser melting (SLM) often suffer from poor ductility and low toughness because of the predominant acicular α′ martensite contained in columnar prior-β grains. In practice, post heat treatment is necessary. To overcome this deficiency, we have explored designing innovative SLM processing routes to turn the unfavoured α′ martensite, via in-situ decomposition, into lamellar (α+β) microstructures with tuneable characteristic length scales. Such lamellar (α+β) microstructures lead to superior mechanical properties which markedly exceed ASTM standards and outperform the majority of Ti-6Al-4V fabricated by other additive manufacturing processes. Furthermore, we find that the lattice parameter of the β phase in the (α+β) lamellae falls into a specific range of 3.18–3.21 A. Hence the lattice parameter of β phase can serve as an indicator to predict whether significant martensite decomposition has taken place in situ in Ti-6Al-4V made by SLM. This work marks an important step forward in the understanding of how to tailor microstructure in situ for the development of high-performance Ti-6Al-4V parts by SLM.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Additive manufacturing of metals
Herzog, D., Seyda, V., Wycisk, E., & Emmelmann, C. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.07.019 · Cited by 4,759
Hall–Petch relation and boundary strengthening
Hansen, N. (2004) · Scripta Materialia · doi:10.1016/j.scriptamat.2004.06.002 · Cited by 3,799
A study of the microstructural evolution during selective laser melting of Ti–6Al–4V
Thijs, L., Verhaeghe, F., Craeghs, T., Humbeeck, J. V., & Kruth, J.-P. (2010) · Acta Materialia · doi:10.1016/j.actamat.2010.02.004 · Cited by 2,929
Materials Properties Handbook: Titanium Alloys
Boyer, R. R., Welsch, G. E., & Collings, E. W. (1994) · Medical Entomology and Zoology · Cited by 2,637
The metallurgy and processing science of metal additive manufacturing
Sames, W. J., List, F. A., Pannala, S., Dehoff, R. R., & Babu, S. S. (2016) · International Materials Reviews · doi:10.1080/09506608.2015.1116649 · Cited by 2,529
Vrancken, B., Thijs, L., Kruth, J.-P., & Van Humbeeck, J. (2012) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2012.07.022 · Cited by 1,896
Metal Additive Manufacturing: A Review of Mechanical Properties
Lewandowski, J. J., & Seifi, M. (2016) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070115-032024 · Cited by 1,722
Vilaro, T., Colin, C., & Bartout, J. D. (2011) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-011-0731-y · Cited by 1,283
Xu, W., Brandt, M., Sun, S., Elambasseril, J., Liu, Q., Latham, K., Xia, K., & Qian, M. (2015) · Acta Materialia · doi:10.1016/j.actamat.2014.11.028 · Cited by 1,245
Self-citationRafi, H. K., Karthik, N. V., Gong, H., Starr, T. L., & Stucker, B. E. (2013) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-013-0658-0 · Cited by 987
Selective laser melting of biocompatible metals for rapid manufacturing of medical parts
Vandenbroucke, B., & Kruth, J. (2007) · Rapid Prototyping Journal · doi:10.1108/13552540710776142 · Cited by 981
Al-Bermani, S. S., Blackmore, M., Zhang, W., & Todd, I. (2010) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-010-0397-x · Cited by 860
Tan, X., Kok, Y., Tan, Y. J., Descoins, M., Mangelinck, D., Tor, S. B., Leong, K. F., & Chua, C. K. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.06.036 · Cited by 718
Li, P., Warner, D. H., Fatemi, A., & Phan, N. (2016) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2015.12.003 · Cited by 546
Ductility of a Ti‐6Al‐4V alloy produced by selective laser melting of prealloyed powders
Facchini, L., Magalini, E., Robotti, P., Molinari, A., Höges, S., & Wissenbach, K. (2010) · Rapid Prototyping Journal · doi:10.1108/13552541011083371 · Cited by 512
Tang, H. P., Qian, M., Liu, N., Zhang, X. Z., Yang, G. Y., & Wang, J. (2015) · JOM · doi:10.1007/s11837-015-1300-4 · Cited by 483
Self-citationMicrostructural Control of Additively Manufactured Metallic Materials
Collins, P. C., Brice, D. A., Samimi, P., Ghamarian, I., & Fraser, H. L. (2016) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070115-031816 · Cited by 461
On the Texture Formation of Selective Laser Melted Ti-6Al-4V
Simonelli, M., Tse, Y. Y., & Tuck, C. J. (2014) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-014-2218-0 · Cited by 391
On the fatigue properties of metals manufactured by selective laser melting – The role of ductility
Leuders, S., Lieneke, T., Lammers, S., Tröster, T., & Niendorf, T. (2014) · Journal of Materials Research · doi:10.1557/jmr.2014.157 · Cited by 309
The laser additive manufacture of Ti-6Al-4V
Kobryn, P. A., & Semiatin, S. L. (2001) · JOM · doi:10.1007/s11837-001-0068-x · Cited by 304
Facchini, L., Magalini, E., Robotti, P., & Molinari, A. (2009) · Rapid Prototyping Journal · doi:10.1108/13552540910960262 · Cited by 290
Additive manufacturing and postprocessing of Ti-6Al-4V for superior mechanical properties
Qian, M., Xu, W., Brandt, M., & Tang, H. P. (2016) · MRS Bulletin · doi:10.1557/mrs.2016.215 · Cited by 275
Self-citationTi-6Al-4V Additively Manufactured by Selective Laser Melting with Superior Mechanical Properties
Xu, W., Sun, S., Elambasseril, J., Liu, Q., Brandt, M., & Qian, M. (2015) · JOM · doi:10.1007/s11837-015-1297-8 · Cited by 244
Self-citationInfluence of tempering temperature and time on the α′-Ti-6Al-4V martensite
Gil, F. X., Rius, D. R., & Planell, J. A. (1996) · Journal of Alloys and Compounds · doi:10.1016/0925-8388(95)02057-8 · Cited by 230
Lu, S., Tang, H., Ning, Y. P., Liu, N., StJohn, D. H., & Qian, M. (2015) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-015-2976-3 · Cited by 141
Self-citation
Cited by
Grain structure control during metal 3D printing by high-intensity ultrasound
Todaro, C. J., Easton, M. A., Qiu, D., Zhang, D., Bermingham, M. J., Lui, E. W., Brandt, M., StJohn, D. H., & Qian, M. (2020) · Nature Communications · doi:10.1038/s41467-019-13874-z · Cited by 848
Self-citationInvited review article: Strategies and processes for high quality wire arc additive manufacturing
Cunningham, C. R., Flynn, J. M., Shokrani, A., Dhokia, V., & Newman, S. T. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.06.020 · Cited by 820
Gokuldoss, P. K., Kolla, S., & Eckert, J. (2017) · Materials · doi:10.3390/ma10060672 · Cited by 804
Chowdhury, S., Yadaiah, N., Prakash, C., Ramakrishna, S., Dixit, S., Gupta, L. R., & Buddhi, D. (2022) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2022.07.121 · Cited by 784
Additive manufacturing of steels: a review of achievements and challenges
Haghdadi, N., Laleh, M., Moyle, M., & Primig, S. (2021) · Journal of Materials Science · doi:10.1007/s10853-020-05109-0 · Cited by 622
“[26] Xu W, Lui E, Pateras A, Qian M, Brandt M (2017) In situ tailoring microstructure in additively manufactured Ti–”
Background
Metadata
- Authors
- Xu, W., Lui, E. W., Pateras, A., Qian, M., & Brandt, M.
- Venue
- Acta Materialia
- Publisher
- Elsevier BV
- Published
- 2017-02
- Volume
- 125
- Pages
- 390-400
- ISSN
- 1359-6454 (ISSN-L)
- OpenAlex
- W2565222948
- Cited by
- 687
- References
- 25
- FWCI
- 28.92
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.