The DOI matches its Crossref record; 51 of the 51 references it cites were found in a registry or an index.
Solid-solution strengthening in refractory high entropy alloys
Open accessAbstract
Abstract Compression stress-strain curves of a number of refractory high entropy alloys (RHEAs) were generated at temperatures ranging from room temperature to 1000 °C. It is shown that solid-solution strengthening in these alloys has both an athermal and a thermal component. Results from mechanical testing are combined with literature data to develop solid-solution strengthening models for both components that incorporate the particularities of single-phase body centered cubic (BCC) materials. The athermal component is affected by a combination of atomic size mismatch and elastic modulus mismatch, which depend upon average values from each alloy, thereby allowing this component to be estimated in a high-throughput fashion. On the other hand, the thermally-activated yield stress component does not correlate with any parameter that can be calculated by averaging pure elemental atomic properties and it is observed to be larger than the values found for pure BCC refractory metals and their dilute alloys. Overall, RHEAs are found to have larger thermal and athermal yield stress components compared to pure or conventional refractory alloys, which explains their relatively high strengths at room temperature.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A critical review of high entropy alloys and related concepts
Miracle, D. B., & Senkov, O. N. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.08.081 · Cited by 8,973
A fracture-resistant high-entropy alloy for cryogenic applications
Gludovatz, B., Hohenwarter, A., Catoor, D., Chang, E. H., George, E. P., & Ritchie, R. O. (2014) · Science · doi:10.1126/science.1254581 · Cited by 5,714
Takeuchi, A., & Inoue, A. (2005) · MATERIALS TRANSACTIONS · doi:10.2320/matertrans.46.2817 · Cited by 4,909
Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off
Li, Z., Pradeep, K. G., Deng, Y., Raabe, D., & Tasan, C. C. (2016) · Nature · doi:10.1038/nature17981 · Cited by 4,071
Mechanical properties of Nb25Mo25Ta25W25 and V20Nb20Mo20Ta20W20 refractory high entropy alloys
Senkov, O. N., Wilks, G. B., Scott, J. M., & Miracle, D. B. (2011) · Intermetallics · doi:10.1016/j.intermet.2011.01.004 · Cited by 3,239
High-entropy alloy: challenges and prospects
Ye, Y. F., Wang, Q., Lu, J., Liu, C. T., & Yang, Y. (2016) · Materials Today · doi:10.1016/j.mattod.2015.11.026 · Cited by 3,016
Single Crystal Elastic Constants and Calculated Aggregate Properties. A Handbook
Simmons, G., & Wang, H. F. (1971) · Medical Entomology and Zoology · Cited by 2,644
Materials Properties Handbook: Titanium Alloys
Boyer, R. R., Welsch, G. E., & Collings, E. W. (1994) · Medical Entomology and Zoology · Cited by 2,637
Phase stability in high entropy alloys: Formation of solid-solution phase or amorphous phase
GUO, S., & LIU, C. T. (2011) · Progress in Natural Science: Materials International · doi:10.1016/s1002-0071(12)60080-x · Cited by 2,534
Wu, Z., Bei, H., Pharr, G. M., & George, E. P. (2014) · Acta Materialia · doi:10.1016/j.actamat.2014.08.026 · Cited by 2,134
Cited by
High entropy alloys: A focused review of mechanical properties and deformation mechanisms
George, E. P., Curtin, W. A., & Tasan, C. C. (2020) · Acta Materialia · doi:10.1016/j.actamat.2019.12.015 · Cited by 1,917
Mechanistic origin of high strength in refractory BCC high entropy alloys up to 1900K
Maresca, F., & Curtin, W. A. (2020) · Acta Materialia · doi:10.1016/j.actamat.2019.10.015 · Cited by 508
Mechanically alloyed high entropy alloys: existing challenges and opportunities
Kumar, A., Singh, A., & Suhane, A. (2022) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2022.01.141 · Cited by 294
Strength can be controlled by edge dislocations in refractory high-entropy alloys
Lee, C., Maresca, F., Feng, R., Chou, Y., Ungar, T., Widom, M., An, K., Poplawsky, J. D., Chou, Y.-C., Liaw, P. K., et al. (2021) · Nature Communications · doi:10.1038/s41467-021-25807-w · Cited by 262
Modeling solid solution strengthening in high entropy alloys using machine learning
Wen, C., Wang, C., Zhang, Y., Antonov, S., Xue, D., Lookman, T., & Su, Y. (2021) · Acta Materialia · doi:10.1016/j.actamat.2021.116917 · Cited by 254
Metadata
- Authors
- Coury, F. G., Kaufman, M., & Clarke, A. J.
- Venue
- Acta Materialia
- Publisher
- Elsevier BV
- Published
- 2019-08
- Volume
- 175
- Pages
- 66-81
- ISSN
- 1359-6454 (ISSN-L)
- OpenAlex
- W2950425307
- Cited by
- 290
- References
- 51
- FWCI
- 13.12
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Solid-solution strengthening in refractory high entropy alloys. https://app.cochat.ai/papers/10.1016/j.actamat.2019.06.006
- The paper
- Coury, F. G., Kaufman, M., & Clarke, A. J. (2019). Solid-solution strengthening in refractory high entropy alloys. Acta Materialia. https://doi.org/10.1016/j.actamat.2019.06.006
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.