The DOI matches its Crossref record; 20 of the 20 references it cites were found in a registry or an index.
High temperature strength of refractory complex concentrated alloys
Open accessAbstract
Thermodynamic and mechanical properties of 15 single-phase and 11 multi-phase refractory complex concentrated alloys (RCCAs) are reported. Using the CALPHAD approach, phase diagrams for these alloys are calculated to identify the solidus (melting, T m ) temperatures and volume fractions of secondary phases. Correlations were identified between the strength drops at 1000°C and 1200°C and the alloy compositions, room temperature properties, melting temperatures and volume fractions of secondary phases. The influence of alloy density on the temperature dependence of specific yield strength was also explored. The conducted analysis suggests that the loss of high-temperature strength of single-phase BCC RCCAs is related to the activation of diffusion-controlled deformation mechanisms, which occurs at T ≥ 0.6 T m , so that the alloys with higher T m retain their strength to higher temperatures. On the other hand, a rapid decrease in strength of multi-phase RCCAs with increasing temperature above 1000°C is probably due to dissolution of secondary phases.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Phase Transformations in Metals and Alloys
Porter, D. A., & Easterling, K. E. (1992) · doi:10.1007/978-1-4899-3051-4 · Cited by 4,904
Mechanical properties of Nb25Mo25Ta25W25 and V20Nb20Mo20Ta20W20 refractory high entropy alloys
Senkov, O. N., Wilks, G. B., Scott, J. M., & Miracle, D. B. (2011) · Intermetallics · doi:10.1016/j.intermet.2011.01.004 · Cited by 3,239
Self-citationRefractory high-entropy alloys
Senkov, O. N., Wilks, G. B., Miracle, D. B., Chuang, C. P., & Liaw, P. K. (2010) · Intermetallics · doi:10.1016/j.intermet.2010.05.014 · Cited by 2,950
Self-citationDevelopment and exploration of refractory high entropy alloys—A review
Senkov, O. N., Miracle, D. B., Chaput, K. J., & Couzinie, J.-P. (2018) · Journal of Materials Research · doi:10.1557/jmr.2018.153 · Cited by 1,631
Self-citationSix decades of the Hall–Petch effect – a survey of grain-size strengthening studies on pure metals
Cordero, Z. C., Knight, B. E., & Schuh, C. A. (2016) · International Materials Reviews · doi:10.1080/09506608.2016.1191808 · Cited by 1,209
Microstructure and elevated temperature properties of a refractory TaNbHfZrTi alloy
Senkov, O. N., Scott, J. M., Senkova, S. V., Meisenkothen, F., Miracle, D. B., & Woodward, C. F. (2012) · Journal of Materials Science · doi:10.1007/s10853-012-6260-2 · Cited by 916
Self-citationEnhanced mechanical properties of HfMoTaTiZr and HfMoNbTaTiZr refractory high-entropy alloys
Juan, C.-C., Tsai, M.-H., Tsai, C.-W., Lin, C.-M., Wang, W.-R., Yang, C.-C., Chen, S.-K., Lin, S.-J., & Yeh, J.-W. (2015) · Intermetallics · doi:10.1016/j.intermet.2015.03.013 · Cited by 633
Han, Z. D., Chen, N., Zhao, S. F., Fan, L. W., Yang, G. N., Shao, Y., & Yao, K. F. (2017) · Intermetallics · doi:10.1016/j.intermet.2017.01.007 · Cited by 528
Mapping the world of complex concentrated alloys
Gorsse, S., Miracle, D. B., & Senkov, O. N. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.06.027 · Cited by 432
Self-citationDatabase on the mechanical properties of high entropy alloys and complex concentrated alloys
Gorsse, S., Nguyen, M. H., Senkov, O. N., & Miracle, D. B. (2018) · Data in Brief · doi:10.1016/j.dib.2018.11.111 · Cited by 322
Self-citationFrom high-entropy alloys to complex concentrated alloys
Gorsse, S., Couzinié, J.-P., & Miracle, D. B. (2018) · Comptes Rendus. Physique · doi:10.1016/j.crhy.2018.09.004 · Cited by 293
Self-citationAccelerated exploration of multi-principal element alloys for structural applications
Senkov, O. N., Miller, J. D., Miracle, D. B., & Woodward, C. (2015) · Calphad · doi:10.1016/j.calphad.2015.04.009 · Cited by 275
Self-citationGrain growth and Hall-Petch relationship in a refractory HfNbTaZrTi high-entropy alloy
Chen, S., Tseng, K.-K., Tong, Y., Li, W., Tsai, C.-W., Yeh, J.-W., & Liaw, P. K. (2019) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2019.04.291 · Cited by 227
Chen, H.-L., Mao, H., & Chen, Q. (2018) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2017.07.082 · Cited by 207
TCHEA1: A Thermodynamic Database Not Limited for “High Entropy” Alloys
Mao, H., Chen, H.-L., & Chen, Q. (2017) · Journal of Phase Equilibria and Diffusion · doi:10.1007/s11669-017-0570-7 · Cited by 184
Senkov, O. N., Pilchak, A. L., & Semiatin, S. L. (2018) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-018-4646-8 · Cited by 174
Self-citationRao, S. I., Akdim, B., Antillon, E. A., Woodward, C. F., Parthasarathy, T. A., & Senkov, O. N. (2019) · Acta Materialia · doi:10.1016/j.actamat.2019.02.013 · Cited by 171
Self-citationAbout the Reliability of CALPHAD Predictions in Multicomponent Systems
Gorsse, S., & Senkov, O. N. (2018) · Entropy · doi:10.3390/e20120899 · Cited by 125
Self-citationGorsse, S., & Tancret, F. (2018) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2018.152 · Cited by 102
Self-citationRao, S. I., Antillon, E. A., Woodward, C. F., Akdim, B., Parthasarathy, T. A., & Senkov, O. N. (2019) · Scripta Materialia · doi:10.1016/j.scriptamat.2019.02.012 · Cited by 71
Self-citation
Cited by
Mechanistic origin of high strength in refractory BCC high entropy alloys up to 1900K
Maresca, F., & Curtin, W. A. (2020) · Acta Materialia · doi:10.1016/j.actamat.2019.10.015 · Cited by 508
Natural-mixing guided design of refractory high-entropy alloys with as-cast tensile ductility
Wei, S., Kim, S. J., Kang, J., Zhang, Y., Zhang, Y., Furuhara, T., Park, E. S., & Tasan, C. C. (2020) · Nature Materials · doi:10.1038/s41563-020-0750-4 · Cited by 503
Refractory high-entropy alloys: A focused review of preparation methods and properties
Xiong, W., Guo, A. X. Y., Zhan, S., Liu, C.-T., & Cao, S. C. (2023) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2022.08.046 · Cited by 429
Multiplicity of dislocation pathways in a refractory multiprincipal element alloy
Wang, F., Balbus, G. H., Xu, S., Su, Y., Shin, J., Rottmann, P. F., Knipling, K. E., Stinville, J.-C., Mills, L. H., Senkov, O. N., et al. (2020) · Science · doi:10.1126/science.aba3722 · Cited by 361
Self-citationTheory of screw dislocation strengthening in random BCC alloys from dilute to “High-Entropy” alloys
Maresca, F., & Curtin, W. A. (2020) · Acta Materialia · doi:10.1016/j.actamat.2019.10.007 · Cited by 310
Metadata
- Authors
- Senkov, O. N., Gorsse, S., & Miracle, D. B.
- Venue
- Acta Materialia
- Publisher
- Elsevier BV
- Published
- 2019-08
- Volume
- 175
- Pages
- 394-405
- ISSN
- 1359-6454 (ISSN-L)
- OpenAlex
- W2951468489
- Cited by
- 423
- References
- 20
- FWCI
- 18.28
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.