The DOI matches its Crossref record; 178 of the 178 references it cites were found in a registry or an index.
High entropy alloys: A focused review of mechanical properties and deformation mechanisms
Open accessAbstract
The high-entropy alloy (HEA) concept was based on the idea that high mixing entropy can promote formation of stable single-phase microstructures. During the past 15 years, various alloy systems have been explored to identify HEA systems with improved property combinations, leading to an extraordinary growth of this field. In the large pool of alloys with varying characteristics, the first single-phase HEA with good tensile properties, the equiatomic CrMnFeCoNi alloy has become the benchmark material, and it forms the basis of much of our current fundamental understanding of HEA mechanical behavior. As the field is evolving to the more broadly defined complex concentrated alloys (CCAs) and the available data in the literature increase exponentially, a fundamental question remains unchanged: how special are these new materials? In the first part of this review, select mechanical properties of HEAs and CCAs are compared with those of conventional engineering alloys. This task is difficult because of the limited tensile data available for HEAs and CCAs. Additionally, the wider suite of mechanical properties needed to assess structural materials is woefully lacking. Nonetheless, our evaluations have not revealed many HEAs or CCAs with properties far exceeding those of conventional engineering alloys, although specific alloys can show notable enhancements in specific properties. Consequently, it is reasonable to first approach the understanding of HEAs and CCAs through the assessment of how the well-established deformation mechanisms in conventional alloys operate or are modified in the presence of the high local complexity of the HEAs and CCAs. The second part of the paper provides a detailed review of the deformation mechanisms of HEAs with the FCC and BCC structures. For the former, we chose the CrMnFeCoNi (Cantor) alloy because it is the alloy on which the most rigorous and thorough investigations have been performed and, for the latter, we chose the TiZrHfNbTa (Senkov) alloy because this is one of the few refractory HEAs that exhibits any tensile ductility at room temperature. As expected, our review shows that the fundamental deformation mechanisms in these systems, and their dependence on basic physical properties, are broadly similar to those of conventional FCC and BCC metals. The third part of this review examines the theoretical and modeling efforts to date that seek to provide either qualitative or quantitative understanding of the mechanical performance of FCC and BCC HEAs. Since experiments reveal no fundamentally new mechanisms of deformation, this section starts with an overview of modeling perspectives and fundamental considerations. The review then turns to the evolution of modeling and predictions as compared to recent experiments, highlighting both successes and limitations. Finally, in spite of some significant successes, important directions for further theory development are discussed. Overall, while the individual deformation mechanisms or properties of the HEAs and CCAs are not, by and large, “special” relative to conventional alloys, the present HEA rush remains valuable because the compositional freedom that comes from the multi-element space will allow exploration of whether multiple mechanisms can operate sequentially or simultaneously, which may yet lead to the creation of new alloys with a spectrum of mechanical properties that are significantly superior to those of current engineering alloys.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A climbing image nudged elastic band method for finding saddle points and minimum energy paths
Henkelman, G., Uberuaga, B. P., & Jónsson, H. (2000) · The Journal of Chemical Physics · doi:10.1063/1.1329672 · Cited by 21,620
A critical review of high entropy alloys and related concepts
Miracle, D. B., & Senkov, O. N. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.08.081 · Cited by 8,973
A fracture-resistant high-entropy alloy for cryogenic applications
Gludovatz, B., Hohenwarter, A., Catoor, D., Chang, E. H., George, E. P., & Ritchie, R. O. (2014) · Science · doi:10.1126/science.1254581 · Cited by 5,714
Self-citationMetastable high-entropy dual-phase alloys overcome the strength–ductility trade-off
Li, Z., Pradeep, K. G., Deng, Y., Raabe, D., & Tasan, C. C. (2016) · Nature · doi:10.1038/nature17981 · Cited by 4,071
Self-citationOtto, F., Dlouhý, A., Somsen, C., Bei, H., Eggeler, G., & George, E. P. (2013) · Acta Materialia · doi:10.1016/j.actamat.2013.06.018 · Cited by 3,352
Self-citationMechanical properties of Nb25Mo25Ta25W25 and V20Nb20Mo20Ta20W20 refractory high entropy alloys
Senkov, O. N., Wilks, G. B., Scott, J. M., & Miracle, D. B. (2011) · Intermetallics · doi:10.1016/j.intermet.2011.01.004 · Cited by 3,239
Titanium and Titanium Alloys: Fundamentals and Applications
(2003) · Wiley eBooks · doi:10.1002/3527602119 · Cited by 3,108
Refractory high-entropy alloys
Senkov, O. N., Wilks, G. B., Miracle, D. B., Chuang, C. P., & Liaw, P. K. (2010) · Intermetallics · doi:10.1016/j.intermet.2010.05.014 · Cited by 2,950
Kinetics of flow and strain-hardening
Mecking, H., & Kocks, U. F. (1981) · Acta Metallurgica · doi:10.1016/0001-6160(81)90112-7 · Cited by 2,814
Wu, Z., Bei, H., Pharr, G. M., & George, E. P. (2014) · Acta Materialia · doi:10.1016/j.actamat.2014.08.026 · Cited by 2,134
Self-citation
Cited by
Mechanical behavior of high-entropy alloys
Li, W., Xie, D., Li, D., Zhang, Y., Gao, Y., & Liaw, P. K. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2021.100777 · Cited by 1,321
Multicomponent high-entropy Cantor alloys
Cantor, B. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100754 · Cited by 877
Direct observation of chemical short-range order in a medium-entropy alloy
Chen, X., Wang, Q., Cheng, Z., Zhu, M., Zhou, H., Jiang, P., Zhou, L., Xue, Q., Yuan, F., Zhu, J., et al. (2021) · Nature · doi:10.1038/s41586-021-03428-z · Cited by 819
High-entropy alloys with heterogeneous microstructure: Processing and mechanical properties
Sathiyamoorthi, P., & Kim, H. S. (2022) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100709 · Cited by 766
Strong yet ductile nanolamellar high-entropy alloys by additive manufacturing
Ren, J., Zhang, Y., Zhao, D., Chen, Y., Guan, S., Liu, Y., Liu, L., Peng, S., Kong, F., Poplawsky, J. D., et al. (2022) · Nature · doi:10.1038/s41586-022-04914-8 · Cited by 747
Exceptional fracture toughness of CrCoNi-based medium- and high-entropy alloys at 20 kelvin
Liu, D., Yu, Q., Kabra, S., Jiang, M., Forna-Kreutzer, P., Zhang, R., Payne, M., Walsh, F., Gludovatz, B., Asta, M., et al. (2022) · Science · doi:10.1126/science.abp8070 · Cited by 543
Self-citationRefractory high-entropy alloys: A focused review of preparation methods and properties
Xiong, W., Guo, A. X. Y., Zhan, S., Liu, C.-T., & Cao, S. C. (2023) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2022.08.046 · Cited by 429
Short-range ordering and its effects on mechanical properties of high-entropy alloys
Wu, Y., Zhang, F., Yuan, X., Huang, H., Wen, X., Wang, Y., Zhang, M., Wu, H., Liu, X., Wang, H., et al. (2021) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2020.06.018 · Cited by 414
Machine learning for high-entropy alloys: Progress, challenges and opportunities
Liu, X., Zhang, J., & Pei, Z. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2022.101018 · Cited by 397
A review on laser cladding of high-entropy alloys, their recent trends and potential applications
Arif, Z. U., Khalid, M. Y., ur Rehman, E., Ullah, S., Atif, M., & Tariq, A. (2021) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2021.06.041 · Cited by 334
Stacking fault energy in concentrated alloys
Shih, M., Miao, J., Mills, M., & Ghazisaeidi, M. (2021) · Nature Communications · doi:10.1038/s41467-021-23860-z · Cited by 326
Multifunctional High Entropy Alloys Enabled by Severe Lattice Distortion
Wang, H., He, Q., Gao, X., Shang, Y., Zhu, W., Zhao, W., Chen, Z., Gong, H., & Yang, Y. (2024) · Advanced Materials · doi:10.1002/adma.202305453 · Cited by 326
A review on the dynamic-mechanical behaviors of high-entropy alloys
Tang, Y., Wang, R., Xiao, B., Zhang, Z., Li, S., Qiao, J., Bai, S., Zhang, Y., & Liaw, P. K. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2023.101090 · Cited by 314
Recent advances in tribology of high entropy alloys: A critical review
Kumar, D. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2023.101106 · Cited by 310
Mechanically alloyed high entropy alloys: existing challenges and opportunities
Kumar, A., Singh, A., & Suhane, A. (2022) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2022.01.141 · Cited by 294
Local chemical fluctuation mediated ductility in body-centered-cubic high-entropy alloys
Bu, Y., Wu, Y., Lei, Z., Yuan, X., Wu, H., Feng, X., Liu, J., Ding, J., Lu, Y., Wang, H., et al. (2021) · Materials Today · doi:10.1016/j.mattod.2021.02.022 · Cited by 278
Sustainability through alloy design: Challenges and opportunities
Cann, J. L., De Luca, A., Dunand, D. C., Dye, D., Miracle, D. B., Oh, H. S., Olivetti, E. A., Pollock, T. M., Poole, W. J., Yang, R., et al. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100722 · Cited by 191
Ghafarollahi, A., & Buehler, M. J. (2025) · MRS Bulletin · doi:10.1557/s43577-025-00953-4 · Cited by 11
Superconductivity in High-Entropy Antimonide M1–xPtxSb (M = Equimolar Ru, Rh, Pd, and Ir)
Hirai, D., Uematsu, N., Saitoh, K., Katayama, N., & Takenaka, K. (2023) · Inorganic Chemistry · doi:10.1021/acs.inorgchem.3c01364 · Cited by 9
“The resulting materials exhibit unique mechanical properties that have attracted considerable interest 3 .”
Metadata
- Authors
- George, E. P., Curtin, W. A., & Tasan, C. C.
- Venue
- Acta Materialia
- Publisher
- Elsevier BV
- Published
- 2020-04
- Volume
- 188
- Pages
- 435-474
- ISSN
- 1359-6454 (ISSN-L)
- OpenAlex
- W2992394995
- Cited by
- 1,917
- References
- 178
- FWCI
- 79.83
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.