The DOI matches its Crossref record; 178 of the 178 references it cites were found in a registry or an index.
High entropy alloys: A focused review of mechanical properties and deformation mechanisms
Open accessAbstract
The high-entropy alloy (HEA) concept was based on the idea that high mixing entropy can promote formation of stable single-phase microstructures. During the past 15 years, various alloy systems have been explored to identify HEA systems with improved property combinations, leading to an extraordinary growth of this field. In the large pool of alloys with varying characteristics, the first single-phase HEA with good tensile properties, the equiatomic CrMnFeCoNi alloy has become the benchmark material, and it forms the basis of much of our current fundamental understanding of HEA mechanical behavior. As the field is evolving to the more broadly defined complex concentrated alloys (CCAs) and the available data in the literature increase exponentially, a fundamental question remains unchanged: how special are these new materials? In the first part of this review, select mechanical properties of HEAs and CCAs are compared with those of conventional engineering alloys. This task is difficult because of the limited tensile data available for HEAs and CCAs. Additionally, the wider suite of mechanical properties needed to assess structural materials is woefully lacking. Nonetheless, our evaluations have not revealed many HEAs or CCAs with properties far exceeding those of conventional engineering alloys, although specific alloys can show notable enhancements in specific properties. Consequently, it is reasonable to first approach the understanding of HEAs and CCAs through the assessment of how the well-established deformation mechanisms in conventional alloys operate or are modified in the presence of the high local complexity of the HEAs and CCAs. The second part of the paper provides a detailed review of the deformation mechanisms of HEAs with the FCC and BCC structures. For the former, we chose the CrMnFeCoNi (Cantor) alloy because it is the alloy on which the most rigorous and thorough investigations have been performed and, for the latter, we chose the TiZrHfNbTa (Senkov) alloy because this is one of the few refractory HEAs that exhibits any tensile ductility at room temperature. As expected, our review shows that the fundamental deformation mechanisms in these systems, and their dependence on basic physical properties, are broadly similar to those of conventional FCC and BCC metals. The third part of this review examines the theoretical and modeling efforts to date that seek to provide either qualitative or quantitative understanding of the mechanical performance of FCC and BCC HEAs. Since experiments reveal no fundamentally new mechanisms of deformation, this section starts with an overview of modeling perspectives and fundamental considerations. The review then turns to the evolution of modeling and predictions as compared to recent experiments, highlighting both successes and limitations. Finally, in spite of some significant successes, important directions for further theory development are discussed. Overall, while the individual deformation mechanisms or properties of the HEAs and CCAs are not, by and large, “special” relative to conventional alloys, the present HEA rush remains valuable because the compositional freedom that comes from the multi-element space will allow exploration of whether multiple mechanisms can operate sequentially or simultaneously, which may yet lead to the creation of new alloys with a spectrum of mechanical properties that are significantly superior to those of current engineering alloys.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A climbing image nudged elastic band method for finding saddle points and minimum energy paths
Henkelman, G., Uberuaga, B. P., & Jónsson, H. (2000) · The Journal of Chemical Physics · doi:10.1063/1.1329672 · Cited by 21,620
A critical review of high entropy alloys and related concepts
Miracle, D. B., & Senkov, O. N. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.08.081 · Cited by 8,973
A fracture-resistant high-entropy alloy for cryogenic applications
Gludovatz, B., Hohenwarter, A., Catoor, D., Chang, E. H., George, E. P., & Ritchie, R. O. (2014) · Science · doi:10.1126/science.1254581 · Cited by 5,714
Self-citationMetastable high-entropy dual-phase alloys overcome the strength–ductility trade-off
Li, Z., Pradeep, K. G., Deng, Y., Raabe, D., & Tasan, C. C. (2016) · Nature · doi:10.1038/nature17981 · Cited by 4,071
Self-citationOtto, F., Dlouhý, A., Somsen, C., Bei, H., Eggeler, G., & George, E. P. (2013) · Acta Materialia · doi:10.1016/j.actamat.2013.06.018 · Cited by 3,352
Self-citationMechanical properties of Nb25Mo25Ta25W25 and V20Nb20Mo20Ta20W20 refractory high entropy alloys
Senkov, O. N., Wilks, G. B., Scott, J. M., & Miracle, D. B. (2011) · Intermetallics · doi:10.1016/j.intermet.2011.01.004 · Cited by 3,239
Titanium and Titanium Alloys: Fundamentals and Applications
(2003) · Wiley eBooks · doi:10.1002/3527602119 · Cited by 3,108
Refractory high-entropy alloys
Senkov, O. N., Wilks, G. B., Miracle, D. B., Chuang, C. P., & Liaw, P. K. (2010) · Intermetallics · doi:10.1016/j.intermet.2010.05.014 · Cited by 2,950
Kinetics of flow and strain-hardening
Mecking, H., & Kocks, U. F. (1981) · Acta Metallurgica · doi:10.1016/0001-6160(81)90112-7 · Cited by 2,814
Wu, Z., Bei, H., Pharr, G. M., & George, E. P. (2014) · Acta Materialia · doi:10.1016/j.actamat.2014.08.026 · Cited by 2,134
Self-citationExceptional damage-tolerance of a medium-entropy alloy CrCoNi at cryogenic temperatures
Gludovatz, B., Hohenwarter, A., Thurston, K. V. S., Bei, H., Wu, Z., George, E. P., & Ritchie, R. O. (2016) · Nature Communications · doi:10.1038/ncomms10602 · Cited by 1,930
Self-citationMicrostructure and room temperature properties of a high-entropy TaNbHfZrTi alloy
Senkov, O. N., Scott, J. M., Senkova, S. V., Miracle, D. B., & Woodward, C. F. (2011) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2011.02.171 · Cited by 1,856
Enhanced strength and ductility in a high-entropy alloy via ordered oxygen complexes
Lei, Z., Liu, X., Wu, Y., Wang, H., Jiang, S., Wang, S., Hui, X., Wu, Y., Gault, B., Kontis, P., et al. (2018) · Nature · doi:10.1038/s41586-018-0685-y · Cited by 1,764
The onset of twinning in metals: a constitutive description
Meyers, M. A., Vöhringer, O., & Lubarda, V. A. (2001) · Acta Materialia · doi:10.1016/s1359-6454(01)00300-7 · Cited by 1,695
Development and exploration of refractory high entropy alloys—A review
Senkov, O. N., Miracle, D. B., Chaput, K. J., & Couzinie, J.-P. (2018) · Journal of Materials Research · doi:10.1557/jmr.2018.153 · Cited by 1,631
He, J. Y., Liu, W. H., Wang, H., Wu, Y., Liu, X. J., Nieh, T. G., & Lu, Z. P. (2014) · Acta Materialia · doi:10.1016/j.actamat.2013.09.037 · Cited by 1,529
A Statistical Theory of Solid Solution Hardening
Labusch, R. (1970) · physica status solidi (b) · doi:10.1002/pssb.19700410221 · Cited by 1,439
Laplanche, G., Kostka, A., Reinhart, C., Hunfeld, J., Eggeler, G., & George, E. P. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.02.036 · Cited by 1,379
Self-citationDeformation twinning in nanocrystalline materials
Zhu, Y. T., Liao, X. Z., & Wu, X. L. (2012) · Progress in Materials Science · doi:10.1016/j.pmatsci.2011.05.001 · Cited by 1,373
Weyl Semimetals as Hydrogen Evolution Catalysts
Rajamathi, C. R., Gupta, U., Kumar, N., Yang, H., Sun, Y., Süß, V., Shekhar, C., Schmidt, M., Blumtritt, H., Werner, P., et al. (2017) · Advanced Materials · doi:10.1002/adma.201606202 · Cited by 1,358
Schuh, B., Mendez-Martin, F., Völker, B., George, E. P., Clemens, H., Pippan, R., & Hohenwarter, A. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.06.025 · Cited by 1,323
Self-citationSubstitutional solution hardening
Fleischer, R. L. (1963) · Acta Metallurgica · doi:10.1016/0001-6160(63)90213-x · Cited by 1,281
Six decades of the Hall–Petch effect – a survey of grain-size strengthening studies on pure metals
Cordero, Z. C., Knight, B. E., & Schuh, C. A. (2016) · International Materials Reviews · doi:10.1080/09506608.2016.1191808 · Cited by 1,209
(2001) · Alloying · doi:10.31399/asm.tb.aub.t61170417 · Cited by 1,209
Microstructure evolution and critical stress for twinning in the CrMnFeCoNi high-entropy alloy
Laplanche, G., Kostka, A., Horst, O. M., Eggeler, G., & George, E. P. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.07.038 · Cited by 1,198
Self-citationTensile properties of high- and medium-entropy alloys
Gali, A., & George, E. P. (2013) · Intermetallics · doi:10.1016/j.intermet.2013.03.018 · Cited by 1,194
Self-citationStrengthening Mechanisms in Crystal Plasticity
Argon, A. (2007) · Oxford University Press eBooks · doi:10.1093/acprof:oso/9780198516002.001.0001 · Cited by 920
Grain growth and the Hall–Petch relationship in a high-entropy FeCrNiCoMn alloy
Liu, W. H., Wu, Y., He, J. Y., Nieh, T. G., & Lu, Z. P. (2013) · Scripta Materialia · doi:10.1016/j.scriptamat.2012.12.002 · Cited by 916
Microstructure and elevated temperature properties of a refractory TaNbHfZrTi alloy
Senkov, O. N., Scott, J. M., Senkova, S. V., Meisenkothen, F., Miracle, D. B., & Woodward, C. F. (2012) · Journal of Materials Science · doi:10.1007/s10853-012-6260-2 · Cited by 916
Wu, Z., Bei, H., Otto, F., Pharr, G. M., & George, E. P. (2014) · Intermetallics · doi:10.1016/j.intermet.2013.10.024 · Cited by 909
Self-citationTheory of strengthening in fcc high entropy alloys
Varvenne, C., Luque, A., & Curtin, W. A. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.07.040 · Cited by 908
Self-citationMechanical Properties and Stacking Fault Energies of NiFeCrCoMn High-Entropy Alloy
Zaddach, A. J., Niu, C., Koch, C. C., & Irving, D. L. (2013) · JOM · doi:10.1007/s11837-013-0771-4 · Cited by 878
Design of a twinning-induced plasticity high entropy alloy
Deng, Y., Tasan, C. C., Pradeep, K. G., Springer, H., Kostka, A., & Raabe, D. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.04.014 · Cited by 861
Self-citationNanoscale origins of the damage tolerance of the high-entropy alloy CrMnFeCoNi
Zhang, Z., Mao, M. M., Wang, J., Gludovatz, B., Zhang, Z., Mao, S. X., George, E. P., Yu, Q., & Ritchie, R. O. (2015) · Nature Communications · doi:10.1038/ncomms10143 · Cited by 845
Self-citationTunable stacking fault energies by tailoring local chemical order in CrCoNi medium-entropy alloys
Ding, J., Yu, Q., Asta, M., & Ritchie, R. O. (2018) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1808660115 · Cited by 845
Fatigue behavior of Al0.5CoCrCuFeNi high entropy alloys
Hemphill, M. A., Yuan, T., Wang, G. Y., Yeh, J. W., Tsai, C. W., Chuang, A., & Liaw, P. K. (2012) · Acta Materialia · doi:10.1016/j.actamat.2012.06.046 · Cited by 811
Li, Z., Tasan, C. C., Pradeep, K. G., & Raabe, D. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.03.069 · Cited by 757
Self-citationPhase‐Transformation Ductilization of Brittle High‐Entropy Alloys via Metastability Engineering
Huang, H., Wu, Y., He, J., Wang, H., Liu, X., An, K., Wu, W., & Lu, Z. (2017) · Advanced Materials · doi:10.1002/adma.201701678 · Cited by 705
Salishchev, G. A., Tikhonovsky, M. A., Shaysultanov, D. G., Stepanov, N. D., Kuznetsov, A. V., Kolodiy, I. V., Tortika, A. S., & Senkov, O. N. (2014) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2013.12.210 · Cited by 702
Zhang, Z., Sheng, H., Wang, Z., Gludovatz, B., Zhang, Z., George, E. P., Yu, Q., Mao, S. X., & Ritchie, R. O. (2017) · Nature Communications · doi:10.1038/ncomms14390 · Cited by 664
Self-citationTaşan, C. C., Diehl, M., Yan, D., Bechtold, M., Roters, F., Schemmann, L., Zheng, C., Peranio, N., Ponge, D., Koyama, M., et al. (2015) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070214-021103 · Cited by 654
Ultrastrong Medium‐Entropy Single‐Phase Alloys Designed via Severe Lattice Distortion
Sohn, S. S., da Silva, A. K., Ikeda, Y., Körmann, F., Lu, W., Choi, W. S., Gault, B., Ponge, D., Neugebauer, J., & Raabe, D. (2018) · Advanced Materials · doi:10.1002/adma.201807142 · Cited by 632
Zhou, X., Li, X., Ye, Y., Zhao, K., Zhuang, Y., Li, Y., Wei, Y., & Wu, M. (2015) · Nature Communications · doi:10.1038/ncomms9679 · Cited by 628
Lattice distortion in a strong and ductile refractory high-entropy alloy
Lee, C., Song, G., Gao, M. C., Feng, R., Chen, P., Brechtl, J., Chen, Y., An, K., Guo, W., Poplawsky, J. D., et al. (2018) · Acta Materialia · doi:10.1016/j.actamat.2018.08.053 · Cited by 622
Wu, Y. D., Cai, Y. H., Wang, T., Si, J. J., Zhu, J., Wang, Y. D., & Hui, X. D. (2014) · Materials Letters · doi:10.1016/j.matlet.2014.05.134 · Cited by 610
Temperature dependent stacking fault energy of FeCrCoNiMn high entropy alloy
Huang, S., Li, W., Lu, S., Tian, F., Shen, J., Holmström, E., & Vitos, L. (2015) · Scripta Materialia · doi:10.1016/j.scriptamat.2015.05.041 · Cited by 583
The relationship between stress and strain for homogeneous deformations
Voce, E. (1948) · Medical Entomology and Zoology · Cited by 575
Ma, D., Grabowski, B., Körmann, F., Neugebauer, J., & Raabe, D. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.08.050 · Cited by 556
Precipitation in the equiatomic high-entropy alloy CrMnFeCoNi
Pickering, E. J., Muñoz-Moreno, R., Stone, H. J., & Jones, N. G. (2016) · Scripta Materialia · doi:10.1016/j.scriptamat.2015.10.025 · Cited by 555
Wang, Z., Baker, I., Cai, Z., Chen, S., Poplawsky, J. D., & Guo, W. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.08.072 · Cited by 542
Mechanical properties of refractory high-entropy alloys: Experiments and modeling
Yao, H. W., Qiao, J. W., Hawk, J. A., Zhou, H. F., Chen, M. W., & Gao, M. C. (2017) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2016.11.188 · Cited by 528
Alloy design for intrinsically ductile refractory high-entropy alloys
Sheikh, S., Shafeie, S., Hu, Q., Ahlström, J., Persson, C., Veselý, J., Zýka, J., Klement, U., & Guo, S. (2016) · Journal of Applied Physics · doi:10.1063/1.4966659 · Cited by 509
Mechanistic origin of high strength in refractory BCC high entropy alloys up to 1900K
Maresca, F., & Curtin, W. A. (2020) · Acta Materialia · doi:10.1016/j.actamat.2019.10.015 · Cited by 508
Self-citationFormation of deformation twins in f.c.c. crystals
Mahajan, S. K., & Chin, G. Y. (1973) · Acta Metallurgica · doi:10.1016/0001-6160(73)90085-0 · Cited by 501
Fu, Z., Chen, W., Wen, H., Zhang, D., Chen, Z., Zheng, B., Zhou, Y., & Lavernia, E. J. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.01.050 · Cited by 501
Stacking fault energies of face-centered cubic concentrated solid solution alloys
Zhao, S., Stocks, G. M., & Zhang, Y. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.05.001 · Cited by 495
Structure and mechanical properties of a light-weight AlNbTiV high entropy alloy
Stepanov, N. D., Shaysultanov, D. G., Salishchev, G. A., & Tikhonovsky, M. A. (2015) · Materials Letters · doi:10.1016/j.matlet.2014.11.162 · Cited by 494
Physical Metallurgy of High-Entropy Alloys
Yeh, J.-W. (2015) · JOM · doi:10.1007/s11837-015-1583-5 · Cited by 488
Li, Z., Tasan, C. C., Springer, H., Gault, B., & Raabe, D. (2017) · Scientific Reports · doi:10.1038/srep40704 · Cited by 488
Self-citationSun, S. J., Tian, Y. Z., Lin, H. R., Dong, X. G., Wang, Y. H., Zhang, Z. J., & Zhang, Z. F. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.07.054 · Cited by 469
Chen, R., Qin, G., Zheng, H., Wang, L., Su, Y., Chiu, Y., Ding, H., Guo, J., & Fu, H. (2018) · Acta Materialia · doi:10.1016/j.actamat.2017.10.058 · Cited by 469
Laplanche, G., Gadaud, P., Horst, O., Otto, F., Eggeler, G., & George, E. P. (2015) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2014.11.061 · Cited by 467
Self-citationMicrostructure and properties of a refractory high-entropy alloy after cold working
Senkov, O. N., & Semiatin, S. L. (2015) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2015.07.209 · Cited by 461
Predicting twinning stress in fcc metals: Linking twin-energy pathways to twin nucleation
Kibey, S., Liu, J. B., Johnson, D. D., & Sehitoglu, H. (2007) · Acta Materialia · doi:10.1016/j.actamat.2007.08.042 · Cited by 461
Fatigue behavior of a wrought Al0.5CoCrCuFeNi two-phase high-entropy alloy
Tang, Z., Yuan, T., Tsai, C.-W., Yeh, J.-W., Lundin, C. D., & Liaw, P. K. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.07.004 · Cited by 450
Okamoto, N. L., Fujimoto, S., Kambara, Y., Kawamura, M., Chen, Z. M. T., Matsunoshita, H., Tanaka, K., Inui, H., & George, E. P. (2016) · Scientific Reports · doi:10.1038/srep35863 · Cited by 446
Self-citationMapping the world of complex concentrated alloys
Gorsse, S., Miracle, D. B., & Senkov, O. N. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.06.027 · Cited by 432
Solute strengthening in random alloys
Varvenne, C., Leyson, G. P. M., Ghazisaeidi, M., & Curtin, W. A. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.09.046 · Cited by 427
Self-citationMicrostructure and mechanical properties of refractory MoNbHfZrTi high-entropy alloy
Guo, N. N., Wang, L., Luo, L. S., Li, X. Z., Su, Y. Q., Guo, J. J., & Fu, H. Z. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.05.019 · Cited by 426
Ma, Y., Wang, Q., Jiang, B. B., Li, C. L., Hao, J. M., Li, X. N., Dong, C., & Nieh, T. G. (2018) · Acta Materialia · doi:10.1016/j.actamat.2018.01.050 · Cited by 410
Wani, I. S., Bhattacharjee, T., Sheikh, S., Bhattacharjee, P. P., Guo, S., & Tsuji, N. (2016) · Materials Science and Engineering: A · doi:10.1016/j.msea.2016.08.048 · Cited by 408
Wang, S.-P., & Xu, J. (2017) · Materials Science and Engineering: C · doi:10.1016/j.msec.2016.12.057 · Cited by 402
Effect of cryo-deformation on structure and properties of CoCrFeNiMn high-entropy alloy
Stepanov, N., Tikhonovsky, M., Yurchenko, N., Zyabkin, D., Klimova, M., Zherebtsov, S., Efimov, A., & Salishchev, G. (2015) · Intermetallics · doi:10.1016/j.intermet.2014.12.004 · Cited by 399
Magnetically-driven phase transformation strengthening in high entropy alloys
Niu, C., LaRosa, C. R., Miao, J., Mills, M. J., & Ghazisaeidi, M. (2018) · Nature Communications · doi:10.1038/s41467-018-03846-0 · Cited by 393
Phase selection rules for cast high entropy alloys: An overview
Guo, S. (2015) · Materials Science and Technology · doi:10.1179/1743284715y.0000000018 · Cited by 375
Boron doped ultrastrong and ductile high-entropy alloys
Seol, J. B., Bae, J. W., Li, Z., Chan Han, J., Kim, J. G., Raabe, D., & Kim, H. S. (2018) · Acta Materialia · doi:10.1016/j.actamat.2018.04.004 · Cited by 375
NbTaV-(Ti,W) refractory high-entropy alloys: Experiments and modeling
Yao, H. W., Qiao, J. W., Gao, M. C., Hawk, J. A., Ma, S. G., Zhou, H. F., & Zhang, Y. (2016) · Materials Science and Engineering: A · doi:10.1016/j.msea.2016.07.102 · Cited by 361
Joseph, J., Jarvis, T., Wu, X., Stanford, N., Hodgson, P., & Fabijanic, D. M. (2015) · Materials Science and Engineering: A · doi:10.1016/j.msea.2015.02.072 · Cited by 343
High strain-rate compressive deformation behavior of the Al0.1CrFeCoNi high entropy alloy
Kumar, N., Ying, Q., Nie, X., Mishra, R. S., Tang, Z., Liaw, P. K., Brennan, R. E., Doherty, K. J., & Cho, K. C. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.07.161 · Cited by 339
Vanadium is an optimal element for strengthening in both fcc and bcc high-entropy alloys
Yin, B., Maresca, F., & Curtin, W. A. (2020) · Acta Materialia · doi:10.1016/j.actamat.2020.01.062 · Cited by 338
Self-citationIkeda, Y., Grabowski, B., & Körmann, F. (2019) · Materials Characterization · doi:10.1016/j.matchar.2018.06.019 · Cited by 337
Plastic deformation of nickel single crystals at low temperatures
Haasen, P. (1958) · Philosophical magazine · doi:10.1080/14786435808236826 · Cited by 334
Maiti, S., & Steurer, W. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.01.018 · Cited by 331
High pressure synthesis of a hexagonal close-packed phase of the high-entropy alloy CrMnFeCoNi
Tracy, C. L., Park, S., Rittman, D. R., Zinkle, S. J., Bei, H., Lang, M., Ewing, R. C., & Mao, W. L. (2017) · Nature Communications · doi:10.1038/ncomms15634 · Cited by 329
Polymorphism in a high-entropy alloy
Zhang, F., Wu, Y., Lou, H., Zeng, Z., Prakapenka, V. B., Greenberg, E., Ren, Y., Yan, J., Okasinski, J. S., Liu, X., et al. (2017) · Nature Communications · doi:10.1038/ncomms15687 · Cited by 329
Quantitative prediction of solute strengthening in aluminium alloys
Leyson, G. P. M., Curtin, W. A., Hector, L. G., & Woodward, C. F. (2010) · Nature Materials · doi:10.1038/nmat2813 · Cited by 326
Self-citationThe structure and properties of high-entropy alloys and nitride coatings based on them
Pogrebnjak, A. D., Bagdasaryan, A. A., Yakushchenko, I. V., & Beresnev, V. M. (2014) · Russian Chemical Reviews · doi:10.1070/rc2014v083n11abeh004407 · Cited by 320
Schuh, B., Völker, B., Todt, J., Schell, N., Perrière, L., Li, J., Couzinié, J. P., & Hohenwarter, A. (2018) · Acta Materialia · doi:10.1016/j.actamat.2017.09.035 · Cited by 315
Theory of screw dislocation strengthening in random BCC alloys from dilute to “High-Entropy” alloys
Maresca, F., & Curtin, W. A. (2020) · Acta Materialia · doi:10.1016/j.actamat.2019.10.007 · Cited by 310
Self-citationWang, R., Zhang, K., Davies, C., & Wu, X. (2017) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2016.10.138 · Cited by 306
Hypoxia regulates global membrane protein endocytosis through caveolin-1 in cancer cells
Bourseau-Guilmain, E., Menard, J. A., Lindqvist, E., Indira Chandran, V., Christianson, H. C., Cerezo Magaña, M., Lidfeldt, J., Marko-Varga, G., Welinder, C., & Belting, M. (2016) · Nature Communications · doi:10.1038/ncomms11371 · Cited by 305
Park, J. M., Moon, J., Bae, J. W., Jang, M. J., Park, J., Lee, S., & Kim, H. S. (2018) · Materials Science and Engineering: A · doi:10.1016/j.msea.2018.02.031 · Cited by 290
Solid-solution strengthening in refractory high entropy alloys
Coury, F. G., Kaufman, M., & Clarke, A. J. (2019) · Acta Materialia · doi:10.1016/j.actamat.2019.06.006 · Cited by 290
Bidirectional Transformation Enables Hierarchical Nanolaminate Dual‐Phase High‐Entropy Alloys
Lu, W., Liebscher, C. H., Dehm, G., Raabe, D., & Li, Z. (2018) · Advanced Materials · doi:10.1002/adma.201804727 · Cited by 288
Gwalani, B., Gorsse, S., Choudhuri, D., Styles, M., Zheng, Y., Mishra, R. S., & Banerjee, R. (2018) · Acta Materialia · doi:10.1016/j.actamat.2018.05.009 · Cited by 286
On the room temperature deformation mechanisms of a TiZrHfNbTa refractory high-entropy alloy
Couzinié, J.-P., Lilensten, L., Champion, Y., Dirras, G., Perrière, L., & Guillot, I. (2015) · Materials Science and Engineering: A · doi:10.1016/j.msea.2015.08.024 · Cited by 284
Microstructure and mechanical properties of CoCrFeNiZrx eutectic high-entropy alloys
Huo, W., Zhou, H., Fang, F., Xie, Z., & Jiang, J. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.08.030 · Cited by 281
A ductile high entropy alloy with attractive magnetic properties
Li, P., Wang, A., & Liu, C. T. (2017) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2016.09.186 · Cited by 277
Juan, C.-C., Tsai, M., Tsai, C., Hsu, W., Lin, C.-M., Chen, S.-K., Lin, S.-J., & Yeh, J. (2016) · Materials Letters · doi:10.1016/j.matlet.2016.08.060 · Cited by 275
Okamoto, N. L., Yuge, K., Tanaka, K., Inui, H., & George, E. P. (2016) · AIP Advances · doi:10.1063/1.4971371 · Cited by 274
Self-citationInteratomic potential to study plasticity in stainless steels: the FeNiCr model alloy
Bonny, G., Terentyev, D., Pasianot, R. C., Poncé, S., & Bakaev, A. (2011) · Modelling and Simulation in Materials Science and Engineering · doi:10.1088/0965-0393/19/8/085008 · Cited by 272
Tuning Ideal Tensile Strengths and Intrinsic Ductility of bcc Refractory Alloys
Qi, L., & Chrzan, D. C. (2014) · Physical Review Letters · doi:10.1103/physrevlett.112.115503 · Cited by 267
Microstructure, mechanical and corrosion behaviors of AlCoCuFeNi-(Cr,Ti) high entropy alloys
Xiao, D. H., Zhou, P. F., Wu, W. Q., Diao, H. Y., Gao, M. C., Song, M., & Liaw, P. K. (2017) · Materials & Design · doi:10.1016/j.matdes.2016.12.036 · Cited by 266
Hydrogen enhances strength and ductility of an equiatomic high-entropy alloy
Luo, H., Li, Z., & Raabe, D. (2017) · Scientific Reports · doi:10.1038/s41598-017-10774-4 · Cited by 257
Processing, Microstructure and Mechanical Properties of the CrMnFeCoNi High-Entropy Alloy
Gludovatz, B., George, E. P., & Ritchie, R. O. (2015) · JOM · doi:10.1007/s11837-015-1589-z · Cited by 254
Self-citationThe Chemistry of Deformation: How Solutes Soften Pure Metals
Trinkle, D. R., & Woodward, C. (2005) · Science · doi:10.1126/science.1118616 · Cited by 248
Elastic and plastic properties of as-cast equimolar TiHfZrTaNb high-entropy alloy
Dirras, G., Lilensten, L., Djemia, P., Laurent-Brocq, M., Tingaud, D., Couzinié, J.-P., Perrière, L., Chauveau, T., & Guillot, I. (2016) · Materials Science and Engineering: A · doi:10.1016/j.msea.2015.12.017 · Cited by 245
Chen, H., Kauffmann, A., Gorr, B., Schliephake, D., Seemüller, C., Wagner, J. N., Christ, H.-J., & Heilmaier, M. (2016) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2015.11.050 · Cited by 241
Rao, S. I., Varvenne, C., Woodward, C., Parthasarathy, T. A., Miracle, D., Senkov, O. N., & Curtin, W. A. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.12.011 · Cited by 236
Self-citationAtomic-scale characterization and modeling of 60° dislocations in a high-entropy alloy
Smith, T. M., Hooshmand, M. S., Esser, B. D., Otto, F., McComb, D. W., George, E. P., Ghazisaeidi, M., & Mills, M. J. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.03.045 · Cited by 226
Self-citationEffect of temperature on the fatigue-crack growth behavior of the high-entropy alloy CrMnFeCoNi
Thurston, K. V. S., Gludovatz, B., Hohenwarter, A., Laplanche, G., George, E. P., & Ritchie, R. O. (2017) · Intermetallics · doi:10.1016/j.intermet.2017.05.009 · Cited by 215
Self-citationLattice Distortions in the FeCoNiCrMn High Entropy Alloy Studied by Theory and Experiment
Oh, H., Ma, D., Leyson, G., Grabowski, B., Park, E., Körmann, F., & Raabe, D. (2016) · Entropy · doi:10.3390/e18090321 · Cited by 213
Strong grain-size effect on deformation twinning of an Al0.1CoCrFeNi high-entropy alloy
Wu, S. W., Wang, G., Yi, J., Jia, Y. D., Hussain, I., Zhai, Q. J., & Liaw, P. K. (2017) · Materials Research Letters · doi:10.1080/21663831.2016.1257514 · Cited by 207
Ma, S. G., Zhang, S. F., Qiao, J. W., Wang, Z. H., Gao, M. C., Jiao, Z. M., Yang, H. J., & Zhang, Y. (2014) · Intermetallics · doi:10.1016/j.intermet.2014.05.018 · Cited by 204
Laplanche, G., Bonneville, J., Varvenne, C., Curtin, W. A., & George, E. P. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.10.014 · Cited by 199
Self-citationAverage-atom interatomic potential for random alloys
Varvenne, C., Luque, A., Nöhring, W. G., & Curtin, W. A. (2016) · Physical review. B./Physical review. B · doi:10.1103/physrevb.93.104201 · Cited by 197
Self-citationPolycrystalline elastic moduli of a high-entropy alloy at cryogenic temperatures
Haglund, A., Koehler, M., Catoor, D., George, E. P., & Keppens, V. (2015) · Intermetallics · doi:10.1016/j.intermet.2014.11.005 · Cited by 196
Self-citationMicrostructure of a near-equimolar refractory high-entropy alloy
Couzinié, J. P., Dirras, G., Perrière, L., Chauveau, T., Leroy, E., Champion, Y., & Guillot, I. (2014) · Materials Letters · doi:10.1016/j.matlet.2014.04.062 · Cited by 193
Jiang, L., Cao, Z. Q., Jie, J. C., Zhang, J. J., Lu, Y. P., Wang, T. M., & Li, T. J. (2015) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2015.07.185 · Cited by 188
Microstructures and mechanical properties of Co2MoxNi2VWx eutectic high entropy alloys
Jiang, H., Zhang, H., Huang, T., Lu, Y., Wang, T., & Li, T. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.07.113 · Cited by 188
Li, J., Fang, Q., Liu, B., Liu, Y., & Liu, Y. (2016) · RSC Advances · doi:10.1039/c6ra16503f · Cited by 180
Aging behavior of the HfNbTaTiZr high entropy alloy
Stepanov, N. D., Yurchenko, N. Y., Zherebtsov, S. V., Tikhonovsky, M. A., & Salishchev, G. A. (2018) · Materials Letters · doi:10.1016/j.matlet.2017.09.094 · Cited by 180
Novel Fe36Mn21Cr18Ni15Al10 high entropy alloy with bcc/B2 dual-phase structure
Shaysultanov, D. G., Salishchev, G. A., Ivanisenko, Y. V., Zherebtsov, S. V., Tikhonovsky, M. A., & Stepanov, N. D. (2017) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2017.02.211 · Cited by 177
Phase stability and tensile properties of Co-free Al0.5CrCuFeNi2 high-entropy alloys
Ng, C., Guo, S., Luan, J., Wang, Q., Lu, J., Shi, S., & Liu, C. T. (2014) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2013.09.105 · Cited by 175
Dirras, G., Couque, H., Lilensten, L., Heczel, A., Tingaud, D., Couzinié, J.-P., Perrière, L., Gubicza, J., & Guillot, I. (2016) · Materials Characterization · doi:10.1016/j.matchar.2015.11.018 · Cited by 171
Rao, S. I., Akdim, B., Antillon, E. A., Woodward, C. F., Parthasarathy, T. A., & Senkov, O. N. (2019) · Acta Materialia · doi:10.1016/j.actamat.2019.02.013 · Cited by 171
Shock compression response of high entropy alloys
Jiang, Z. J., He, J. Y., Wang, H. Y., Zhang, H. S., Lu, Z. P., & Dai, L. H. (2016) · Materials Research Letters · doi:10.1080/21663831.2016.1191554 · Cited by 168
Feng, X. B., Zhang, J. Y., Wang, Y. Q., Hou, Z. Q., Wu, K., Liu, G., & Sun, J. (2017) · International Journal of Plasticity · doi:10.1016/j.ijplas.2017.04.013 · Cited by 166
Yao, H., Qiao, J.-W., Gao, M. C., Hawk, J. A., Ma, S., & Zhou, H. (2016) · Entropy · doi:10.3390/e18050189 · Cited by 159
Slip nucleation in single crystal FeNiCoCrMn high entropy alloy
Patriarca, L., Ojha, A., Şehitoğlu, H., & Chumlyakov, Y. I. (2015) · Scripta Materialia · doi:10.1016/j.scriptamat.2015.09.009 · Cited by 155
Microstructures and mechanical properties of Al CrFeNiTi0.25 alloys
Liu, S., Gao, M. C., Liaw, P. K., & Zhang, Y. (2014) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2014.09.073 · Cited by 153
Thermophysical properties of Ni-containing single-phase concentrated solid solution alloys
Jin, K., Mu, S., An, K., Porter, W. D., Samolyuk, G. D., Stocks, G. M., & Bei, H. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.12.079 · Cited by 152
Moravčík, I., Čížek, J., Zapletal, J., Kováčová, Z., Veselý, J., Minárik, P., Kitzmantel, M., Neubauer, E., & Dlouhý, I. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.01.036 · Cited by 149
Rao, S. I., Woodward, C. F., Parthasarathy, T. A., & Senkov, O. N. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.05.071 · Cited by 143
First-principles-based prediction of yield strength in the RhIrPdPtNiCu high-entropy alloy
Yin, B., & Curtin, W. A. (2019) · npj Computational Materials · doi:10.1038/s41524-019-0151-x · Cited by 140
Self-citationFormation of a Huesler-like L21 phase in a CoCrCuFeNiAlTi high-entropy alloy
Choudhuri, D., Alam, T., Borkar, T., Gwalani, B., Mantri, A. S., Srinivasan, S. G., Gibson, M. A., & Banerjee, R. (2015) · Scripta Materialia · doi:10.1016/j.scriptamat.2014.12.006 · Cited by 137
Structure of the high-entropy alloy Al CrFeCoNi: fcc versus bcc
Ogura, M., Fukushima, T., Zeller, R., & Dederichs, P. H. (2017) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2017.04.318 · Cited by 134
Dirras, G. F., Gubicza, J., Heczel, A., Lilensten, L., Couzinié, J., Perrière, L., Guillot, I., & Hocini, A. (2015) · Materials Characterization · doi:10.1016/j.matchar.2015.08.007 · Cited by 133
Chen, Z., Chen, W., Wu, B., Cao, X., Liu, L., & Fu, Z. (2015) · Materials Science and Engineering A · doi:10.1016/j.msea.2015.08.056 · Cited by 132
Microstructure and mechanical properties of the new Nb25Sc25Ti25Zr25 eutectic high entropy alloy
Rogal, Ł., Morgiel, J., Swiatek, Z., & Czerwiński, F. (2015) · Materials Science and Engineering A · doi:10.1016/j.msea.2015.10.071 · Cited by 131
Long-ranged interactions in bcc NbMoTaW high-entropy alloys
Körmann, F., Ruban, A. V., & Sluiter, M. H. F. (2016) · Materials Research Letters · doi:10.1080/21663831.2016.1198837 · Cited by 131
Remarkable strength of CoCrFeNi high-entropy alloy wires at cryogenic and elevated temperatures
Huo, W., Fang, F., Zhou, H. D., Xie, Z., Shang, J., & Jiang, J. (2017) · Scripta Materialia · doi:10.1016/j.scriptamat.2017.08.006 · Cited by 124
Abuzaid, W. Z., & Şehitoğlu, H. (2017) · Materials Characterization · doi:10.1016/j.matchar.2017.05.014 · Cited by 114
The parallel replica dynamics method – Coming of age
Pérez, D., Uberuaga, B. P., & Voter, A. F. (2015) · Computational Materials Science · doi:10.1016/j.commatsci.2014.12.011 · Cited by 105
Wu, Z., Troparevsky, M. C., Gao, Y., Morris, J. R., Stocks, G. M., & Bei, H. (2017) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2017.07.001 · Cited by 105
Boundary micro-cracking in metastable Fe45Mn35Co10Cr10 high-entropy alloys
Wei, S., Kim, J., & Taşan, C. C. (2019) · Acta Materialia · doi:10.1016/j.actamat.2019.01.036 · Cited by 103
A high-entropy V 35 Ti 35 Fe 15 Cr 10 Zr 5 alloy with excellent high-temperature strength
Xian, X., Zhong, Z., Zhang, B., Song, K., Chen, C., Wang, S., Cheng, J., & Wu, Y. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.02.029 · Cited by 101
Daoud, H., Manzoni, A. M., Völkl, R., Wanderka, N., & Glatzel, U. (2015) · Advanced Engineering Materials · doi:10.1002/adem.201500179 · Cited by 93
Jin, K., Guo, W. H., Lu, C., Ullah, M. W., Zhang, Y., Weber, W. J., Wang, L., Poplawsky, J. D., & Bei, H. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.09.025 · Cited by 92
Zhu, Z., Ma, K., Yang, X. M., & Shek, C. H. (2016) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2016.11.376 · Cited by 91
Hardening by slip-twin and twin-twin interactions in FeMnNiCoCr
Bönisch, M., Wu, Y., & Şehitoğlu, H. (2018) · Acta Materialia · doi:10.1016/j.actamat.2018.04.054 · Cited by 87
Laser surface forming of AlCoCrCuFeNi particle reinforced AZ91D matrix composites
Meng, G., Yue, T. M., Lin, X., Yang, H., Xie, H., & Ding, X. (2015) · Optics & Laser Technology · doi:10.1016/j.optlastec.2015.02.001 · Cited by 85
Ma, S. G., Qiao, J., Wang, Z., Yang, H., & Zhang, Y. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.09.092 · Cited by 85
Dislocation glide in model Ni(Al) solid solutions by molecular dynamics
Rodary, E., Rodney, D., Proville, L., Brechet, Y. J. M., & Martin, G. (2004) · Physical Review B · doi:10.1103/physrevb.70.054111 · Cited by 84
Orientation dependence of twinning in single crystalline CoCrFeMnNi high-entropy alloy
Kireeva, I. V., Chumlyakov, Y. I., Pobedennaya, Z. V., Kuksgausen, I. V., & Karaman, İ. (2017) · Materials Science and Engineering A · doi:10.1016/j.msea.2017.08.065 · Cited by 82
Nanoindentation Creep Behavior of an Al0.3CoCrFeNi High-Entropy Alloy
Zhang, L., Yu, P., Cheng, H., Zhang, H., Diao, H., Shi, Y., Chen, B., Chen, P., Feng, R., Bai, J., et al. (2016) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-016-3469-8 · Cited by 81
Microstructure and mechanical properties of Al x Si 0.2 CrFeCoNiCu 1−x high-entropy alloys
Li, C., Xue, Y., Hua, M., Cao, T., Ma, L., & Wang, L. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.11.013 · Cited by 74
Room temperature nanoindentation creep behavior of TiZrHfBeCu(Ni) high entropy bulk metallic glasses
Gong, P., Jin, J., Deng, L. M., Wang, S., Gu, J., Yao, K., & Wang, X. (2017) · Materials Science and Engineering A · doi:10.1016/j.msea.2017.01.094 · Cited by 74
Traub, H., Neuhäuser, H., & Schwink, C. (1977) · Acta Metallurgica · doi:10.1016/0001-6160(77)90234-6 · Cited by 73
Quantitative analysis of solution hardening in selected copper alloys
Wille, T., Gieseke, W., & Schwink, C. (1987) · Acta Metallurgica · doi:10.1016/0001-6160(87)90267-7 · Cited by 73
Fcc nanostructured TiFeCoNi alloy with multi-scale grains and enhanced plasticity
Fu, Z., MacDonald, B. E., Zhang, D., Wu, B., Chen, W., Ivanisenko, J., Hahn, H., & Lavernia, E. J. (2017) · Scripta Materialia · doi:10.1016/j.scriptamat.2017.09.023 · Cited by 73
Liu, T., Wu, Z., Stoica, A. D., Xie, Q., Wu, W., Gao, Y., Bei, H., & An, K. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.06.039 · Cited by 72
Rao, S. I., Antillon, E. A., Woodward, C. F., Akdim, B., Parthasarathy, T. A., & Senkov, O. N. (2019) · Scripta Materialia · doi:10.1016/j.scriptamat.2019.02.012 · Cited by 71
Cross-slip of long dislocations in FCC solid solutions
Nöhring, W. G., & Curtin, W. A. (2018) · Acta Materialia · doi:10.1016/j.actamat.2018.05.027 · Cited by 67
Self-citationRao, Z., Wang, X., Wang, Q., Liu, T., Chen, X., Wang, L., & Hui, X. (2017) · Advanced Engineering Materials · doi:10.1002/adem.201600726 · Cited by 66
Structural stability of high entropy alloys under pressure and temperature
Ahmad, A. S., Su, Y., Liu, S., Ståhl, K., Wu, Y., Hui, X., Ruett, U., Gutowski, O., Glazyrin, K. V., Liermann, H., et al. (2017) · Journal of Applied Physics · doi:10.1063/1.4984796 · Cited by 62
Jiang, H. Z., Jiang, L., Han, K., Lu, Y., Wang, T., Cao, Z., & Li, T. (2015) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-015-1767-8 · Cited by 61
Mechanical activated synthesis of alumina dispersed FeNiCoCrAlMn high entropy alloy
Prasad, H., Singh, S., & Panigrahi, B. B. (2016) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2016.09.080 · Cited by 60
Fu, Z., Chen, W., Wen, H., Morgan, S., Chen, F., Zheng, B., Zhou, Y., Zhang, L., & Lavernia, E. J. (2015) · Materials Science and Engineering A · doi:10.1016/j.msea.2015.07.052 · Cited by 57
Kawasaki, M., Ahn, B., Kumar, P., Jang, J., & Langdon, T. G. (2016) · Advanced Engineering Materials · doi:10.1002/adem.201600578 · Cited by 55
Plastic deformation properties of Zr–Nb–Ti–Ta–Hf high-entropy alloys
Feuerbacher, M., Heidelmann, M., & Thomas, C. (2015) · The Philosophical Magazine A Journal of Theoretical Experimental and Applied Physics · doi:10.1080/14786435.2015.1028506 · Cited by 53
Wang, X.-R., He, P., Lin, T., & Wang, Z.-Q. (2015) · Materials Science and Technology · doi:10.1179/1743284715y.0000000101 · Cited by 43
Twinning in [001]-oriented single crystals of CoCrFeMnNi high-entropy alloy at tensile deformation
Kireeva, I. V., Chumlyakov, Y. I., Pobedennaya, Z. V., Vyrodova, A. V., & Karaman, İ. (2017) · Materials Science and Engineering A · doi:10.1016/j.msea.2017.12.059 · Cited by 41
Atomic-scale study of dislocation glide in a model solid solution
Proville, L., Rodney, D., Brechet, Y. J. M., & Martin, G. (2006) · The Philosophical Magazine A Journal of Theoretical Experimental and Applied Physics · doi:10.1080/14786430600567721 · Cited by 38
Saroukhani, S., & Warner, D. H. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.02.001 · Cited by 34
Microstructure and Room-Temperature Mechanical Properties of FeCrMoVTi x High-Entropy Alloys
Guo, J. F., Huang, X., & Huang, W. (2017) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-017-2742-3 · Cited by 29
Optimization-Based String Method for Finding Minimum Energy Path
Samanta, A., & Weinan, E. (2012) · Communications in Computational Physics · doi:10.4208/cicp.220212.030812a · Cited by 24
Kireeva, I. V., Chumlyakov, Y. I., Pobedennaya, Z. V., Kuksgauzen, D. A., Karaman, İ., & Şehitoğlu, H. (2016) · AIP conference proceedings · doi:10.1063/1.4966383 · Cited by 15
Cited by
Direct observation of chemical short-range order in a medium-entropy alloy
Chen, X., Wang, Q., Cheng, Z., Zhu, M., Zhou, H., Jiang, P., Zhou, L., Xue, Q., Yuan, F., Zhu, J., et al. (2021) · Nature · doi:10.1038/s41586-021-03428-z · Cited by 819
Strong yet ductile nanolamellar high-entropy alloys by additive manufacturing
Ren, J., Zhang, Y., Zhao, D., Chen, Y., Guan, S., Liu, Y., Liu, L., Peng, S., Kong, F., Poplawsky, J. D., et al. (2022) · Nature · doi:10.1038/s41586-022-04914-8 · Cited by 747
Refractory high-entropy alloys: A focused review of preparation methods and properties
Xiong, W., Guo, A. X. Y., Zhan, S., Liu, C.-T., & Cao, S. C. (2023) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2022.08.046 · Cited by 429
Mechanically alloyed high entropy alloys: existing challenges and opportunities
Kumar, A., Singh, A., & Suhane, A. (2022) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2022.01.141 · Cited by 294
Sustainability through alloy design: Challenges and opportunities
Cann, J. L., De Luca, A., Dunand, D. C., Dye, D., Miracle, D. B., Oh, H. S., Olivetti, E. A., Pollock, T. M., Poole, W. J., Yang, R., et al. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100722 · Cited by 191
Metadata
- Authors
- George, E. P., Curtin, W. A., & Tasan, C. C.
- Venue
- Acta Materialia
- Publisher
- Elsevier BV
- Published
- 2020-04
- Volume
- 188
- Pages
- 435-474
- ISSN
- 1359-6454 (ISSN-L)
- OpenAlex
- W2992394995
- Cited by
- 1,917
- References
- 178
- FWCI
- 79.83
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.