The DOI matches its Crossref record; 39 of the 39 references it cites were found in a registry or an index.
An ultra-high strength martensitic steel fabricated using selective laser melting additive manufacturing: Densification, microstructure, and mechanical properties
Open accessAbstract
Abstract Martensitic steels have gained renewed interest recently for their use in automotive, aerospace, and defense applications due to their ultra-high yield strengths and reasonable ductility. A recently discovered low alloy martensitic steel, AF9628, has been shown to exhibit strengths greater than 1.5 GPa with more than 10% tensile ductility, due to the formation of e-carbide phase. In an effort to produce high strength parts with a high degree of control over geometry, the work herein presents the effects of selective laser melting (SLM) parameters on the microstructure and mechanical properties of this new steel. An optimization framework to determine the process parameters for building porosity-free parts is introduced. This framework utilizes the computationally inexpensive Eagar-Tsai model, calibrated with single track experiments, to predict the melt pool geometry. A geometric criterion for determining maximum allowable hatch spacing is also developed in order to avoid lack of fusion induced porosity in the as-printed parts. Using this framework, fully dense samples were successfully fabricated over a wide range of process parameters, allowing the construction of an SLM processing map for AF9628. The as-printed samples displayed tensile strengths of up to 1.4 GPa, the highest reported to date for any 3D printed alloy, with up to 11% elongation. The demonstrated flexibility in process parameter selection, while maintaining full density, opens up the possibility of local microstructural refinement and parameter optimization for improved mechanical properties in as-printed parts. The process optimization framework introduced here is expected to allow successful printing of new materials in an accelerated fashion.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Least Squares Support Vector Machine Classifiers
Suykens, J. A. K., & Vandewalle, J. (1999) · Neural Processing Letters · doi:10.1023/a:1018628609742 · Cited by 9,362
Additive manufacturing of metallic components – Process, structure and properties
DebRoy, T., Wei, H. L., Zuback, J. S., Mukherjee, T., Elmer, J. W., Milewski, J. O., Beese, A. M., Wilson-Heid, A., De, A., & Zhang, W. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.10.001 · Cited by 8,805
Bayesian calibration of computer models
Kennedy, M. C., & O'Hagan, A. (2001) · Journal of the Royal Statistical Society Series B: Statistical Methodology · doi:10.1111/1467-9868.00294 · Cited by 4,222
Khairallah, S. A., Anderson, A. T., Rubenchik, A., & King, W. E. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.02.014 · Cited by 2,766
King, W. E., Anderson, A. T., Ferencz, R. M., Hodge, N. E., Kamath, C., Khairallah, S. A., & Rubenchik, A. M. (2015) · Applied Physics Reviews · doi:10.1063/1.4937809 · Cited by 1,258
Read, N., Wang, W., Essa, K., & Attallah, M. M. (2015) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2014.09.044 · Cited by 1,218
Microstructures and mechanical behavior of Inconel 718 fabricated by selective laser melting
Amato, K. N., Gaytan, S. M., Murr, L. E., Martinez, E., Shindo, P. W., Hernandez, J., Collins, S., & Medina, F. (2012) · Acta Materialia · doi:10.1016/j.actamat.2011.12.032 · Cited by 1,166
Gu, D., Hagedorn, Y.-C., Meiners, W., Meng, G., Batista, R. J. S., Wissenbach, K., & Poprawe, R. (2012) · Acta Materialia · doi:10.1016/j.actamat.2012.04.006 · Cited by 1,089
Liverani, E., Toschi, S., Ceschini, L., & Fortunato, A. (2017) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2017.05.042 · Cited by 990
Welding Metallurgy and Weldability
Lippold, J. C. (2014) · Wiley eBooks · doi:10.1002/9781118960332 · Cited by 919
Mechanical Properties of AlSi10Mg Produced by Selective Laser Melting
Kempen, K., Thijs, L., Van Humbeeck, J., & Kruth, J.-P. (2012) · Physics Procedia · doi:10.1016/j.phpro.2012.10.059 · Cited by 849
Kasperovich, G., Haubrich, J., Gussone, J., & Requena, G. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.05.070 · Cited by 818
The microstructure and mechanical properties of deposited-IN718 by selective laser melting
Wang, Z., Guan, K., Gao, M., Li, X., Chen, X., & Zeng, X. (2012) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2011.10.107 · Cited by 812
Balling behavior of stainless steel and nickel powder during selective laser melting process
Li, R., Liu, J., Shi, Y., Wang, L., & Jiang, W. (2012) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-011-3566-1 · Cited by 722
Tucho, W. M., Cuvillier, P., Sjolyst-Kverneland, A., & Hansen, V. F. (2017) · Materials Science and Engineering A · doi:10.1016/j.msea.2017.02.062 · Cited by 682
Fayazfar, H., Salarian, M., Rogalsky, A., Sarker, D., Russo, P., Paserin, V., & Toyserkani, E. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.02.018 · Cited by 665
Temperature fields produced by traveling distributed heat sources
Eagar, T. W., & Tsai, N. S. (1983) · Welding Journal · Cited by 599
Popovich, V., Borisov, E. V., Popovich, A., Sufiiarov, V. S., Masaylo, D. V., & Alzina, L. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.10.075 · Cited by 580
Zhang, H., Zhu, H., Qi, T., Hu, Z., & Zeng, X. (2016) · Materials Science and Engineering A · doi:10.1016/j.msea.2015.12.101 · Cited by 565
Liu, Y., Yang, Y., Mai, S., Wang, D., & Song, C. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.08.086 · Cited by 498
Rai, R., Elmer, J. W., Palmer, T. A., & DebRoy, T. (2007) · Journal of Physics D Applied Physics · doi:10.1088/0022-3727/40/18/037 · Cited by 473
Song, B., Dong, S., Zhang, B., Liao, H., & Coddet, C. (2012) · Materials & Design · doi:10.1016/j.matdes.2011.09.051 · Cited by 429
Self-citationKamath, C., El-dasher, B., Gallegos, G. F., King, W. E., & Sisto, A. (2014) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-014-5954-9 · Cited by 395
Delgado, J., Ciurana, J., & Rodríguez, C. A. (2012) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-011-3643-5 · Cited by 305
Surface tension of liquid metals and alloys — Recent developments
Egry, I., Ricci, E., Novakovic, R., & Ozawa, S. (2010) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2010.06.009 · Cited by 296
Rashid, R., Masood, S. H., Ruan, D., Palanisamy, S., Rahman Rashid, R. A., & Brandt, M. (2017) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2017.06.023 · Cited by 240
Welding Metallurgy and Weldability
Baeslack, W. A., & Lippold, J. C. (2022) · Medical Entomology and Zoology · Cited by 224
Yadroitsev, I., Yadroitsava, I., Bertrand, P., & Smurov, I. (2012) · Rapid Prototyping Journal · doi:10.1108/13552541211218117 · Cited by 221
Density of Additively-Manufactured, 316L SS Parts Using Laser Powder-Bed Fusion at Powers Up to 400W
Lawrence Livermore National Lab. (LLNL), L., Kamath, C., USDOE, El-dasher, B., Gallegos, G., King, W. E., & Sisto, A. (2013) · doi:10.2172/1116929 · Cited by 207
Agius, D., Kourousis, K. I., & Wallbrink, C. (2018) · Metals · doi:10.3390/met8010075 · Cited by 205
Spatial Control of Functional Response in 4D-Printed Active Metallic Structures
Ma, J., Franco, B., Tapia, G., Karayagiz, K., Johnson, L., Liu, J., Arroyave, R., Karaman, I., & Elwany, A. (2017) · Scientific Reports · doi:10.1038/srep46707 · Cited by 200
Self-citationAhmadi, A., Mirzaeifar, R., Moghaddam, N. S., Turabi, A. S., Karaca, H. E., & Elahinia, M. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.09.043 · Cited by 199
Metal powder absorptivity: modeling and experiment
Boley, C. D., Mitchell, S., Rubenchik, A. M., et al. (2016) · Applied Optics · doi:10.1364/ao.55.006496 · Cited by 163
Effect of energy per layer on the anisotropy of selective laser melted AlSi12 aluminium alloy
Rashid, R. A. R., Masood, S. H., Ruan, D., Palanisamy, S., Rashid, R. A. R., Elambasseril, J., & Brandt, M. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.05.040 · Cited by 129
Mahmoudi, M., Tapia, G., Franco, B., Ma, J., Arróyave, R., Karaman, İ., & Elwany, A. H. (2018) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2018.08.037 · Cited by 129
Self-citationTensile actuation response of additively manufactured nickel-titanium shape memory alloys
Sam, J., Franco, B., Ma, J., Karaman, İ., Elwany, A. H., & Mabe, J. H. (2017) · Scripta Materialia · doi:10.1016/j.scriptamat.2017.11.013 · Cited by 111
Self-citationTapia, G., King, W. E., Johnson, L., Arróyave, R., Karaman, İ., & Elwany, A. H. (2018) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4041179 · Cited by 63
Self-citationMahmoudi, M., Tapia, G., Karayağız, K., Franco, B., Ma, J., Arróyave, R., Karaman, İ., & Elwany, A. H. (2018) · Integrating materials and manufacturing innovation · doi:10.1007/s40192-018-0113-z · Cited by 55
Self-citationGibbons, S., Abrahams, R. A., Vaughan, M. W., Barber, R. E., Harris, R. C., Arróyave, R., & Karaman, İ. (2018) · Materials Science and Engineering A · doi:10.1016/j.msea.2018.04.005 · Cited by 39
Self-citation
Cited by
Progress and perspectives in laser additive manufacturing of key aeroengine materials
Tan, C., Weng, F., Sui, S., Chew, Y., & Bi, G. (2021) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2021.103804 · Cited by 520
Wire Arc Additive Manufacturing of Stainless Steels: A Review
Jin, W., Zhang, C., Jin, S., Tian, Y., Wellmann, D., & Liu, W. (2020) · Applied Sciences · doi:10.3390/app10051563 · Cited by 388
Metadata
- Authors
- Seede, R., Shoukr, D., Zhang, B., Whitt, A., Gibbons, S., Flater, P., Elwany, A., Arroyave, R., & Karaman, I.
- Venue
- Acta Materialia
- Publisher
- Elsevier BV
- Published
- 2020-03
- Volume
- 186
- Pages
- 199-214
- ISSN
- 1359-6454 (ISSN-L)
- OpenAlex
- W2997789337
- Cited by
- 301
- References
- 39
- FWCI
- 14.51
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.