The DOI matches its Crossref record.
Improving the compressive strength of bioceramic robocast scaffolds by polymer infiltration
Open accessAbstract
The effect of polymer infiltration on the compressive strength of β-tricalcium phosphate (TCP) scaffolds fabricated by robocasting (direct write assembly) is analyzed in this work. Porous structures consisting of a tetragonal three-dimensional mesh of interpenetrating rods were fabricated from concentrated TCP inks with suitable viscoelastic properties. Biodegradable polymers (polylactic acid (PLA) and poly(ε-caprolactone) (PCL)) were infiltrated into selected scaffolds by immersion of the structure in a polymer melt. Infiltration increased the uniaxial compressive strength of these model scaffolds by a factor of three (PCL) or six (PLA). It also considerably improved the mechanical integrity of the structures after initial cracking, with the infiltrated structure retaining a significant load-bearing capacity after fracture of the ceramic rods. The strength improvement in the infiltrated scaffolds was attributed to two different contributions: the sealing of precursor flaws in the ceramic rod surfaces and the partial transfer of stress to the polymer, as confirmed by finite element analysis. The implications of these results for the mechanical optimization of scaffolds for bone tissue engineering applications are discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
3D printing of ceramics: A review
Chen, Z., Li, Z., Li, J., Liu, C., Lao, C., Fu, Y., Liu, C., Li, Y., Wang, P., & He, Y. (2019) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2018.11.013 · Cited by 2,109
PCL and PCL-based materials in biomedical applications
Malikmammadov, E., Tanir, T. E., Kiziltay, A., Hasirci, V., & Hasirci, N. (2018) · Journal of Biomaterials Science, Polymer Edition · doi:10.1080/09205063.2017.1394711 · Cited by 894
β-tricalcium phosphate for bone substitution: Synthesis and properties
Bohner, M., Santoni, B. L. G., & Döbelin, N. (2020) · Acta Biomaterialia · doi:10.1016/j.actbio.2020.06.022 · Cited by 762
Bioactive glass scaffolds for bone tissue engineering: state of the art and future perspectives
Fu, Q., Saiz, E., Rahaman, M. N., & Tomsia, A. P. (2011) · Materials Science and Engineering: C · doi:10.1016/j.msec.2011.04.022 · Cited by 703
Calcium phosphate cements for bone substitution: Chemistry, handling and mechanical properties
Zhang, J., Liu, W., Schnitzler, V., Tancret, F., & Bouler, J.-M. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.11.001 · Cited by 667
Metadata
- Authors
- Martínez-Vázquez, F. J., Perera, F. H., Miranda, P., Pajares, A., & Guiberteau, F.
- Venue
- Acta Biomaterialia
- Publisher
- Elsevier BV
- Published
- 2010-11
- Volume
- 6
- Issue
- 11
- Pages
- 4361-4368
- ISSN
- 1742-7061 (ISSN-L)
- OpenAlex
- W2114050481
- Cited by
- 204
- References
- 0
- FWCI
- 5.64
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Improving the compressive strength of bioceramic robocast scaffolds by polymer infiltration. https://app.cochat.ai/papers/10.1016/j.actbio.2010.05.024
- The paper
- Martínez-Vázquez, F. J., Perera, F. H., Miranda, P., Pajares, A., & Guiberteau, F. (2010). Improving the compressive strength of bioceramic robocast scaffolds by polymer infiltration. Acta Biomaterialia. https://doi.org/10.1016/j.actbio.2010.05.024
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.