The DOI matches its Crossref record; 266 of the 266 references it cites were found in a registry or an index.
Current state of fabrication technologies and materials for bone tissue engineering
Abstract
A range of traditional and free-form fabrication technologies have been investigated and, in numerous occasions, commercialized for use in the field of regenerative tissue engineering (TE). The demand for technologies capable of treating bone defects inherently difficult to repair has been on the rise. This quest, accompanied by the advent of functionally tailored, biocompatible, and biodegradable materials, has garnered an enormous research interest in bone TE. As a result, different materials and fabrication methods have been investigated towards this end, leading to a deeper understanding of the geometrical, mechanical and biological requirements associated with bone scaffolds. As our understanding of the scaffold requirements expands, so do the capability requirements of the fabrication processes. The goal of this review is to provide a broad examination of existing scaffold fabrication processes and highlight future trends in their development. To appreciate the clinical requirements of bone scaffolds, a brief review of the biological process by which bone regenerates itself is presented first. This is followed by a summary and comparisons of commonly used implant techniques to highlight the advantages of TE-based approaches over traditional grafting methods. A detailed discussion on the clinical and mechanical requirements of bone scaffolds then follows. The remainder of the manuscript is dedicated to current scaffold fabrication methods, their unique capabilities and perceived shortcomings. The range of biomaterials employed in each fabrication method is summarized. Selected traditional and non-traditional fabrication methods are discussed with a highlight on their future potential from the authors' perspective. This study is motivated by the rapidly growing demand for effective scaffold fabrication processes capable of economically producing constructs with intricate and precisely controlled internal and external architectures. STATEMENT OF SIGNIFICANCE: The manuscript summarizes the current state of fabrication technologies and materials used for creating scaffolds in bone tissue engineering applications. A comprehensive analysis of different fabrication methods (traditional and free-form) were summarized in this review paper, with emphasis on recent developments in the field. The fabrication techniques suitable for creating scaffolds for tissue engineering was particularly targeted and their use in bone tissue engineering were articulated. Along with the fabrication techniques, we emphasized the choice of materials in these processes. Considering the limitations of each process, we highlighted the materials and the material properties critical in that particular process and provided a brief rational for the choice of the materials. The functional performance for bone tissue engineering are summarized for different fabrication processes and the choice of biomaterials. Finally, we provide a perspective on the future of the field, highlighting the knowledge gaps and promising avenues in pursuit of effective scaffolds for bone tissue engineering. This extensive review of the field will provide research community with a reference source for current approaches to scaffold preparation. We hope to encourage the researchers to generate next generation biomaterials to be used in these fabrication processes. By providing both advantages and disadvantage of each fabrication method in detail, new fabrication techniques might be devised that will overcome the limitations of the current approaches. These studies should facilitate the efforts of researchers interested in generating ideal scaffolds, and should have applications beyond the repair of bone tissue.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
1 retracted
Items 201–266 of 266
Biocompatibility of ceramic scaffolds for bone replacement made by 3D printing
Leukers, B., Gülkan, H., Irsen, S. H., Milz, S., Tille, C., Seitz, H., & Schieker, M. (2005) · Materialwissenschaft und Werkstofftechnik · doi:10.1002/mawe.200500968 · Cited by 64
Pereira, T., Silva, M. A. C., de Oliveira, M. F., Maia, I. A., da Silva, J. V. L., da Costa, M. F., & Thiré, R. M. D. S. M. (2012) · Virtual and Physical Prototyping · doi:10.1080/17452759.2012.738551 · Cited by 62
Raina, D. B., Larsson, D., Mrkonjic, F., Isaksson, H., Kumar, A., Lidgren, L., & Tägil, M. (2018) · Journal of Controlled Release · doi:10.1016/j.jconrel.2018.01.006 · Cited by 62
Kumaresan, T., Gandhinathan, R., Ramu, M., Ananthasubramanian, M., & Kamarajan, B. P. (2016) · Journal of Mechanical Science and Technology · doi:10.1007/s12206-016-1049-x · Cited by 61
Hochleitner, G., Keßler, M., Schmitz, M., Boccaccini, A. R., Teßmar, J., & Gröll, J. (2017) · Materials Letters · doi:10.1016/j.matlet.2017.06.096 · Cited by 60
Öztürk, B. Y., İnci, İ., Eğri, S., Öztürk, A. M., Yetkin, H., Göktaş, G., Elmas, Ç., Pişkın, E., & Erdoğan, D. (2012) · European Journal of Orthopaedic Surgery & Traumatology · doi:10.1007/s00590-012-1070-4 · Cited by 56
Brennan, M. Á., Renaud, A., Gamblin, A.-L., d’Arros, C., Nédellec, S., Trichet, V., & Layrolle, P. (2015) · Biomedical Materials · doi:10.1088/1748-6041/10/4/045019 · Cited by 56
Guillaume, O., Geven, M. A., Grijpma, D. W., Tang, T., Qin, L., Lai, Y., Yuan, H., Richards, R. G., & Eglin, D. (2016) · Polymers for Advanced Technologies · doi:10.1002/pat.3892 · Cited by 56
Zhou, G., Liu, S., Ma, Y., Xu, W., Meng, W., Lin, X., Wang, W., Wang, S., & Zhang, J. (2017) · International Journal of Nanomedicine · doi:10.2147/ijn.s146679 · Cited by 56
Singh, D., Tripathi, A., Nayak, V., & Kumar, A. (2011) · Journal of Biomaterials Science Polymer Edition · doi:10.1163/092050610x522486 · Cited by 53
Alge, D. L., Bennett, J., Treasure, T., Voytik‐Harbin, S. L., Goebel, W. S., & Chu, T. G. (2012) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.34130 · Cited by 53
Salerno, A., Guarnieri, D., Iannone, M., Zeppetelli, S., Maio, E. D., Iannace, S., & Netti, P. A. (2008) · Acta Biomaterialia · doi:10.1016/j.actbio.2008.10.012 · Cited by 51
Doyle, H., Lohfeld, S., & McHugh, P. E. (2015) · Medical Engineering & Physics · doi:10.1016/j.medengphy.2015.05.009 · Cited by 50
Yang, G. H., Mun, F., & Kim, G. (2015) · Chemical Engineering Journal · doi:10.1016/j.cej.2015.12.047 · Cited by 50
Sarkar, C., Kumari, P., Anuvrat, K., Sahu, S. K., Chakraborty, J., & Garai, S. (2017) · Journal of Materials Science · doi:10.1007/s10853-017-1528-1 · Cited by 50
Vella, J. B., Trombetta, R. P., Hoffman, M. D., Inzana, J. A., Awad, H. A., & Benoit, D. S. W. (2017) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.36270 · Cited by 50
Yin, L., Yang, S., He, M., Chang, Y., Wang, K., Zhu, Y., Liu, Y., Chang, Y., & Yu, Z. (2017) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-017-5898-3 · Cited by 49
Doyle, H., Lohfeld, S., & McHugh, P. E. (2013) · Annals of Biomedical Engineering · doi:10.1007/s10439-013-0913-4 · Cited by 47
Dean, D., Mott, E. J., Luo, X., Busso, M., Wang, M. O., Vorwald, C. E., Siblani, A., & Fisher, J. P. (2014) · Virtual and Physical Prototyping · doi:10.1080/17452759.2013.873337 · Cited by 44
Yetiskin, B., Akıncı, C., & Okay, O. (2017) · Polymer · doi:10.1016/j.polymer.2017.09.023 · Cited by 44
A Novel Approach to 3D-Printed Fabrics and Garments
White, J., Foley, M., & Rowley, A. (2015) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2015.0019 · Cited by 43
Three-dimensional printing of porous load-bearing bioceramic scaffolds
Mancuso, E., Alharbi, N., Bretcanu, O., Marshall, M., Birch, M., McCaskie, A. W., & Dalgarno, K. W. (2017) · Proceedings of the Institution of Mechanical Engineers Part H Journal of Engineering in Medicine · doi:10.1177/0954411916682984 · Cited by 41
Nooeaid, P., Li, W., Roether, J. A., Mouriño, V., Goudouri, O., Schubert, D. W., & Boccaccini, A. R. (2014) · Biointerphases · doi:10.1116/1.4897217 · Cited by 40
Salerno, A., Saurina, J., & Domingo, C. (2015) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2015.11.012 · Cited by 39
Hixon, K. R., Eberlin, C. T., Lu, T., Neal, S. M., Case, N. D., McBride-Gagyi, S. H., & Sell, S. A. (2017) · Biomedical Materials · doi:10.1088/1748-605x/aa5d76 · Cited by 38
Srivas, P. K., Kapat, K., Dadhich, P., Pal, P., Dutta, J., Datta, P., & Dhara, S. (2017) · Bioprinting · doi:10.1016/j.bprint.2017.04.002 · Cited by 38
Bak, T.-Y., Kook, M.-S., Jung, S., & Kim, B. (2014) · Journal of Nanomaterials · doi:10.1155/2014/657542 · Cited by 37
Hrabe, N. W., Heinl, P., Bordia, R. K., Körner, C., & Fernandes, R. J. (2013) · Connective Tissue Research · doi:10.3109/03008207.2013.822864 · Cited by 37
Recommended slicing positions for adaptive direct slicing by image processing technique
Rianmora, S., & Koomsap, P. (2009) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-009-2162-0 · Cited by 36
Inorganic/Organic Biocomposite Cryogels for Regeneration of Bony Tissues
Mishra, R., & Kumar, A. (2011) · Journal of Biomaterials Science Polymer Edition · doi:10.1163/092050610x534230 · Cited by 34
Bölgen, N., Korkusuz, P., Vargel, İ., Kılıç, E., Güzel, E., Çavuşoğlu, T., Uçkan, D., & Pişkın, E. (2013) · Artificial Cells Nanomedicine and Biotechnology · doi:10.3109/21691401.2013.775578 · Cited by 34
Mishra, R., Raina, D. B., Pelkonen, M., Lidgren, L., Tägil, M., & Kumar, A. (2015) · International Journal of Biological Sciences · doi:10.7150/ijbs.13139 · Cited by 34
Vasireddi, R., & Basu, B. (2015) · Rapid Prototyping Journal · doi:10.1108/rpj-12-2013-0123 · Cited by 33
Shuai, C., Feng, P., Zhang, L., Gao, C., Hu, H., Peng, S., & Min, A. (2013) · Science and Technology of Advanced Materials · doi:10.1088/1468-6996/14/5/055002 · Cited by 33
Oliveira, M. N., Rau, L. H., Marodin, A. L., Corrêa, M., Corrêa, L. R., Aragonês, Á., & Magini, R. D. S. (2017) · Implant Dentistry · doi:10.1097/id.0000000000000655 · Cited by 33
Dini, F., Barsotti, G., Puppi, D., Coli, A., Briganti, A., Giannessi, E., Miragliotta, V., Mota, C., Pirosa, A., Stornelli, M. R., et al. (2015) · Journal of Bioactive and Compatible Polymers · doi:10.1177/0883911515597928 · Cited by 32
You, W., Wang, M., Lam, W., & Yuk, W. (2010) · InTech eBooks · doi:10.5772/8574 · Cited by 30
PCL-TCP wet spun scaffolds carrying antibiotic-loaded microspheres for bone tissue engineering
Malikmammadov, E., Tanır, T. E., Kızıltay, A., Hasırcı, V., & Hasırcı, N. (2017) · Journal of Biomaterials Science Polymer Edition · doi:10.1080/09205063.2017.1354671 · Cited by 30
Chemically Treated 3D Printed Polymer Scaffolds for Biomineral Formation
Jackson, R., Patrick, P. S., Page, K., Powell, M. J., Lythgoe, M. F., Miodownik, M. A., Parkin, I. P., Carmalt, C. J., Kalber, T. L., & Bear, J. C. (2018) · ACS Omega · doi:10.1021/acsomega.8b00219 · Cited by 29
A novel cytocompatible, hierarchical porous Ti6Al4V scaffold with immobilized silver nanoparticles
Jia, Z., Li, M., Xiu, P., Xu, X., Cheng, Y., Zheng, Y., Xi, T., Wei, S., & Liu, Z. (2015) · Materials Letters · doi:10.1016/j.matlet.2015.05.084 · Cited by 28
3D-Printed PCL Scaffolds for the Cultivation of Mesenchymal Stem Cells
Steffens, D., Rezende, R. A., Santi, B., Pereira, F. D. A. D. S., Neto, P. I., da Silva, J. V. L., & Pranke, P. H. L. (2015) · Journal of Applied Biomaterials & Functional Materials · doi:10.5301/jabfm.5000252 · Cited by 28
D’Amato, A. R., Schaub, N. J., Cardenas, J. M., Franz, E. S., Rende, D., Ziemba, A. M., & Gilbert, R. J. (2017) · Fibers and Polymers · doi:10.1007/s12221-017-1061-5 · Cited by 28
Porous Heat-Treated Polyacrylonitrile Scaffolds for Bone Tissue Engineering
Vetrík, M., Pařízek, M., Hadraba, D., Kukackova, O., Brus, J., Hlídková, H., Kománková, L., Hodan, J., Sedláček, O., Šlouf, M., et al. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b18839 · Cited by 28
Additive Manufacturing of Poly(Methyl Methacrylate) Biomedical Implants with Dual‐Scale Porosity
Puppi, D., Morelli, A., Bello, F., Valentini, S., & Chiellini, E. (2018) · Macromolecular Materials and Engineering · doi:10.1002/mame.201800247 · Cited by 28
In vitro assessment of laser sintered bioactive glass scaffolds with different pore geometries
Kolan, K. C. R., Thomas, A., Leu, M. C., & Hilmas, G. E. (2015) · Rapid Prototyping Journal · doi:10.1108/rpj-12-2014-0175 · Cited by 27
Yoo, D.-J. (2014) · International Journal of Precision Engineering and Manufacturing · doi:10.1007/s12541-014-0571-y · Cited by 27
Singh, J. P., Pandey, P. M., & Verma, A. K. (2016) · Rapid Prototyping Journal · doi:10.1108/rpj-11-2014-0148 · Cited by 27
Li, C., Gao, L., Chen, F., & Liu, C. (2015) · Journal of Materials Science · doi:10.1007/s10853-015-9244-1 · Cited by 25
Shuai, C., Zhuang, J., Peng, S., & Wen, X. (2014) · Rapid Prototyping Journal · doi:10.1108/rpj-03-2013-0037 · Cited by 24
Properties of PLDLA/bioglass scaffolds produced by selective laser sintering
Salmoria, G. V., Pereira, R. V., Fredel, M. C., & Casadei, A. P. M. (2017) · Polymer Bulletin · doi:10.1007/s00289-017-2093-0 · Cited by 22
Engineered bone scaffolds with Dielectrophoresis-based patterning using 3D printing
Huan, Z., Chu, H. K., Liu, H., Yang, J., & Sun, D. B. (2017) · Biomedical Microdevices · doi:10.1007/s10544-017-0245-5 · Cited by 22
Synthesis and characterisation of β-TCP/bioglass/zirconia scaffolds
Ruiz-Aguilar, C., Aguilar-Reyes, E. A., Flores, M., León-Patiño, C. A., & Núñez‐Anita, R. E. (2017) · Advances in Applied Ceramics Structural Functional and Bioceramics · doi:10.1080/17436753.2017.1356043 · Cited by 21
Rodrigues, M. T., Leonor, I. B., Gröen, N., Viegas, C. A., Dias, I. R., Caridade, S. G., Mano, J. F., Gomes, M. E., & Reis, R. L. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.05.026 · Cited by 20
Rodríguez-Palomo, A., Monopoli, D., Afonso, H., Izquierdo‐Barba, I., & Vallet‐Regí, M. (2016) · Journal of Materials Chemistry B · doi:10.1039/c6tb00675b · Cited by 20
Aghazadeh, M., Samiei, M., Alizadeh, E., Porkar, P., Bakhtiyari, M., & Salehi, R. (2017) · Fibers and Polymers · doi:10.1007/s12221-017-7120-0 · Cited by 20
Li, X., Liu, Y., Peng, H., Ma, X., & Fong, H. (2016) · Materials Letters · doi:10.1016/j.matlet.2016.04.070 · Cited by 19
Smeets, R., Barbeck, M., Hanken, H., Fischer, H., Lindner, M., Heiland, M., Wöltje, M., Ghanaati, S., & Kolk, A. (2016) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.33660 · Cited by 18
Calcium phosphate cements for bone regeneration
Cama, G. (2014) · Elsevier eBooks · doi:10.1533/9780857098104.1.3 · Cited by 17
Multifunctional scaffolds for bone regeneration
Guarino, V., Raucci, M. G., Ronca, A., Cirillo, V., & Ambrosio, L. (2014) · Elsevier eBooks · doi:10.1533/9780857099037.2.95 · Cited by 16
Selective Laser Melting of Magnesium for Future Applications in Medicine
Savalani, M. M., Ng, C. C., & Man, H. C. (2010) · doi:10.1109/icma.2010.45 · Cited by 16
Izquierdo‐Barba, I. (2014) · doi:10.1002/9781118406748.ch10 · Cited by 12
Additive Manufacturing for Bone Load Bearing Applications
Vlasea, M., Basalah, A., Azhari, A., Kandel, R. A., & Toyserkani, E. (2015) · Elsevier eBooks · doi:10.1016/b978-0-12-800547-7.00011-4 · Cited by 11
Golunova, A. S., Jaroš, J., Jurtíková, V., Kotelnikov, I., Kotek, J., Hlídková, H., Streit, L., Hampl, A., Rypáček, F., & Proks, V. (2015) · Physiological Research · doi:10.33549/physiolres.933134 · Cited by 11
Suzuki, O., & Anada, T. (2014) · Materials science forum · doi:10.4028/www.scientific.net/msf.783-786.1366 · Cited by 9
Tailoring the Bioactivity of Natural Origin Inorganic – Polymeric Based Systems
Oliveira, A. L., Leonor, I. B., Malafaya, P. B., Alves, C. M., Azevedo, H. S., & Reis, R. L. (2003) · Key engineering materials · doi:10.4028/www.scientific.net/kem.240-242.111 · Cited by 8
β-Tricalcium phosphate nanofiber scaffolds with fine unidirectional grains
Gazquez, G. C., Chen, H., Moroni, L., Boukamp, B. A., & ten Elshof, J. E. (2017) · Materials Letters · doi:10.1016/j.matlet.2017.05.038 · Cited by 7
Cited by
Normal Bone Anatomy and Physiology
Clarke, B. (2008) · Clinical Journal of the American Society of Nephrology · doi:10.2215/cjn.04151206 · Cited by 2,192
Scaffold Fabrication Technologies and Structure/Function Properties in Bone Tissue Engineering
Collins, M. N., Ren, G., Young, K., Pina, S., Reis, R. L., & Oliveira, J. M. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202010609 · Cited by 867
Effect of the nano/microscale structure of biomaterial scaffolds on bone regeneration
Zhu, L., Luo, D., & Liu, Y. (2020) · International Journal of Oral Science · doi:10.1038/s41368-020-0073-y · Cited by 458
Wang, R., Shi, M., Xu, F., Qiu, Y., Zhang, P., Shen, K., Zhao, Q., Yu, J., & Zhang, Y. (2020) · Nature Communications · doi:10.1038/s41467-020-18267-1 · Cited by 441
Fabrication of Biomedical Scaffolds Using Biodegradable Polymers.
Kirillova, A., Yeazel, T. R., Asheghali, D., Petersen, S. R., Dort, S., Gall, K., & Becker, M. L. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c01200 · Cited by 368
Metadata
- Authors
- Wubneh, A., Tsekoura, E. K., Ayranci, C., & Uludağ, H.
- Venue
- Acta Biomaterialia
- Publisher
- Elsevier BV
- Published
- 2018-10
- Volume
- 80
- Pages
- 1-30
- ISSN
- 1742-7061 (ISSN-L)
- OpenAlex
- W2893267824
- Cited by
- 584
- References
- 266
- FWCI
- 16.23
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.