The DOI matches its Crossref record; 266 of the 266 references it cites were found in a registry or an index.
Current state of fabrication technologies and materials for bone tissue engineering
Abstract
A range of traditional and free-form fabrication technologies have been investigated and, in numerous occasions, commercialized for use in the field of regenerative tissue engineering (TE). The demand for technologies capable of treating bone defects inherently difficult to repair has been on the rise. This quest, accompanied by the advent of functionally tailored, biocompatible, and biodegradable materials, has garnered an enormous research interest in bone TE. As a result, different materials and fabrication methods have been investigated towards this end, leading to a deeper understanding of the geometrical, mechanical and biological requirements associated with bone scaffolds. As our understanding of the scaffold requirements expands, so do the capability requirements of the fabrication processes. The goal of this review is to provide a broad examination of existing scaffold fabrication processes and highlight future trends in their development. To appreciate the clinical requirements of bone scaffolds, a brief review of the biological process by which bone regenerates itself is presented first. This is followed by a summary and comparisons of commonly used implant techniques to highlight the advantages of TE-based approaches over traditional grafting methods. A detailed discussion on the clinical and mechanical requirements of bone scaffolds then follows. The remainder of the manuscript is dedicated to current scaffold fabrication methods, their unique capabilities and perceived shortcomings. The range of biomaterials employed in each fabrication method is summarized. Selected traditional and non-traditional fabrication methods are discussed with a highlight on their future potential from the authors' perspective. This study is motivated by the rapidly growing demand for effective scaffold fabrication processes capable of economically producing constructs with intricate and precisely controlled internal and external architectures. STATEMENT OF SIGNIFICANCE: The manuscript summarizes the current state of fabrication technologies and materials used for creating scaffolds in bone tissue engineering applications. A comprehensive analysis of different fabrication methods (traditional and free-form) were summarized in this review paper, with emphasis on recent developments in the field. The fabrication techniques suitable for creating scaffolds for tissue engineering was particularly targeted and their use in bone tissue engineering were articulated. Along with the fabrication techniques, we emphasized the choice of materials in these processes. Considering the limitations of each process, we highlighted the materials and the material properties critical in that particular process and provided a brief rational for the choice of the materials. The functional performance for bone tissue engineering are summarized for different fabrication processes and the choice of biomaterials. Finally, we provide a perspective on the future of the field, highlighting the knowledge gaps and promising avenues in pursuit of effective scaffolds for bone tissue engineering. This extensive review of the field will provide research community with a reference source for current approaches to scaffold preparation. We hope to encourage the researchers to generate next generation biomaterials to be used in these fabrication processes. By providing both advantages and disadvantage of each fabrication method in detail, new fabrication techniques might be devised that will overcome the limitations of the current approaches. These studies should facilitate the efforts of researchers interested in generating ideal scaffolds, and should have applications beyond the repair of bone tissue.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
1 retracted
Xu, S., Xu, S., Zhou, P., Cheng, X., Xie, Y., Liang, C., & Li, C. (2013) · International Journal of Nanomedicine · doi:10.2147/ijn.s50685 · Cited by 160
RetractedScaffolds in tissue engineering bone and cartilage
Hutmacher, D. W. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00121-6 · Cited by 4,994
Biodegradable polymers as biomaterials
Nair, L. S., & Laurencin, C. T. (2007) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2007.05.017 · Cited by 4,416
Biodegradable and bioactive porous polymer/inorganic composite scaffolds for bone tissue engineering
Rezwan, K., Chen, Q. Z., Blaker, J. J., & Boccaccini, A. R. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.01.039 · Cited by 3,839
Polymers for 3D Printing and Customized Additive Manufacturing
Ligon, S. C., Liska, R., Stampfl, J., Gurr, M., & Mülhaupt, R. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00074 · Cited by 3,741
A Review of Additive Manufacturing
Wong, K. V., & Hernandez, A. (2012) · ISRN Mechanical Engineering · doi:10.5402/2012/208760 · Cited by 2,555
Bending instability of electrically charged liquid jets of polymer solutions in electrospinning
Reneker, D. H., Yarin, A. L., Fong, H., & Koombhongse, S. (2000) · Journal of Applied Physics · doi:10.1063/1.373532 · Cited by 2,462
A review on stereolithography and its applications in biomedical engineering
Melchels, F. P. W., Feijen, J., & Grijpma, D. W. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.04.050 · Cited by 2,457
Wang, X., Xu, S., Zhou, S., Xu, W., Leary, M., Choong, P., Qian, M., Brandt, M., & Xie, Y. M. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.01.012 · Cited by 2,121
Bone tissue engineering using 3D printing
Bose, S., Vahabzadeh, S., & Bandyopadhyay, A. (2013) · Materials Today · doi:10.1016/j.mattod.2013.11.017 · Cited by 1,866
Nanoscale hydroxyapatite particles for bone tissue engineering
Zhou, H., & Lee, J. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.03.019 · Cited by 1,541
Bruder, S. P., Jaiswal, N., & Haynesworth, S. E. (1997) · Journal of Cellular Biochemistry · doi:10.1002/(sici)1097-4644(199702)64:2<278::aid-jcb11>3.0.co;2-f · Cited by 1,485
HADJIDAKIS, D. J., & ANDROULAKIS, I. I. (2006) · Annals of the New York Academy of Sciences · doi:10.1196/annals.1365.035 · Cited by 1,360
Endochondral ossification: How cartilage is converted into bone in the developing skeleton
Mackie, E. J., Ahmed, Y. A., Tatarczuch, L., Chen, K.-S., & Mirams, M. (2008) · The International Journal of Biochemistry & Cell Biology · doi:10.1016/j.biocel.2007.06.009 · Cited by 1,022
Biodegradable polymer matrix nanocomposites for tissue engineering: A review
Armentano, I., Dottori, M., Fortunati, E., Mattioli, S., & Kenny, J. M. (2010) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2010.06.007 · Cited by 999
Bone remodeling during fracture repair: The cellular picture
Schindeler, A., McDonald, M. M., Bokko, P., & Little, D. G. (2008) · Seminars in Cell & Developmental Biology · doi:10.1016/j.semcdb.2008.07.004 · Cited by 961
3D Printing of Scaffolds for Tissue Regeneration Applications
Do, A., Khorsand, B., Geary, S. M., & Salem, A. K. (2015) · Advanced Healthcare Materials · doi:10.1002/adhm.201500168 · Cited by 949
Current concepts of molecular aspects of bone healing
Dimitriou, R., Tsiridis, E., & Giannoudis, P. V. (2005) · Injury · doi:10.1016/j.injury.2005.07.019 · Cited by 945
Taylor cone and jetting from liquid droplets in electrospinning of nanofibers
Yarin, A. L., Koombhongse, S., & Reneker, D. H. (2001) · Journal of Applied Physics · doi:10.1063/1.1408260 · Cited by 894
3D printing of composite calcium phosphate and collagen scaffolds for bone regeneration
Inzana, J. A., Olvera, D., Fuller, S. M., Kelly, J. P., Graeve, O. A., Schwarz, E. M., Kates, S. L., & Awad, H. A. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2014.01.064 · Cited by 840
Effects of parameters on nanofiber diameter determined from electrospinning model
Thompson, C. J., Chase, G. G., Yarin, A. L., & Reneker, D. H. (2007) · Polymer · doi:10.1016/j.polymer.2007.09.017 · Cited by 838
Direct writing by way of melt electrospinning
Brown, T. D., Dalton, P. D., & Hutmacher, D. W. (2011) · Advanced Materials · doi:10.1002/adma.201103482 · Cited by 800
Hollister, S. J., Maddox, R. D., & Taboas, J. M. (2002) · Biomaterials · doi:10.1016/s0142-9612(02)00148-5 · Cited by 715
Polyhydroxyalkanoates: Characteristics, production, recent developments and applications
Raza, Z. A., Abid, S., & Banat, I. M. (2018) · International Biodeterioration & Biodegradation · doi:10.1016/j.ibiod.2017.10.001 · Cited by 708
Overview on Additive Manufacturing Technologies
Calignano, F., Manfredi, D., Ambrosio, E. P., Biamino, S., Lombardi, M., Atzeni, E., Salmi, A., Minetola, P., Iuliano, L., & Fino, P. (2017) · Proceedings of the IEEE · doi:10.1109/jproc.2016.2625098 · Cited by 640
Tan, K. H., Chua, C. K., Leong, K. F., Cheah, C. M., Cheang, P., Abu Bakar, M. S., & Cha, S. W. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00131-5 · Cited by 625
Biofabrication of bone tissue: approaches, challenges and translation for bone regeneration
Tang, D., Tare, R. S., Yang, L.-Y., Williams, D. F., Ou, K.-L., & Oreffo, R. O. C. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.01.024 · Cited by 613
Nam, Y. S., Yoon, J. J., & Park, T. G. (2000) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(2000)53:1<1::aid-jbm1>3.0.co;2-r · Cited by 577
A review of process development steps for new material systems in three dimensional printing (3DP)
Utela, B., Storti, D., Anderson, R., & Ganter, M. (2008) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2009.03.002 · Cited by 548
Physiological Bone Remodeling: Systemic Regulation and Growth Factor Involvement
Siddiqui, J. A., & Partridge, N. C. (2016) · Physiology · doi:10.1152/physiol.00061.2014 · Cited by 534
Role of interconnections in porous bioceramics on bone recolonization in vitro and in vivo
LU, J. X., FLAUTRE, B., ANSELME, K., HARDOUIN, P., GALLUR, A., DESCAMPS, M., & THIERRY, B. (1999) · Journal of Materials Science: Materials in Medicine · doi:10.1023/a:1008973120918 · Cited by 530
Department of Orthopaedic Surgery, O. R. L., & Shapiro, F. (2008) · European Cells and Materials · doi:10.22203/ecm.v015a05 · Cited by 527
Eshraghi, S., & Das, S. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.02.002 · Cited by 524
Synthetic biopolymer nanocomposites for tissue engineering scaffolds
Okamoto, M., & John, B. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.06.001 · Cited by 509
Crockett, J. C., Rogers, M. J., Coxon, F. P., Hocking, L. J., & Helfrich, M. H. (2011) · Journal of Cell Science · doi:10.1242/jcs.063032 · Cited by 500
Additive manufacturing technologies: state of the art and trends
Gardan, J. (2016) · International Journal of Production Research · doi:10.1080/00207543.2015.1115909 · Cited by 489
Mondschein, R. J., Kanitkar, A., Williams, C. B., Verbridge, S. S., & Long, T. E. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2017.06.005 · Cited by 475
Selective laser sintering in biomedical engineering
Mazzoli, A. (2013) · Medical & Biological Engineering & Computing · doi:10.1007/s11517-012-1001-x · Cited by 469
Bioactive polymeric scaffolds for tissue engineering
Stratton, S., Shelke, N. B., Hoshino, K., Rudraiah, S., & Kumbar, S. G. (2016) · Bioactive Materials · doi:10.1016/j.bioactmat.2016.11.001 · Cited by 469
Design and 3D Printing of Scaffolds and Tissues
An, J., Teoh, J. E. M., Suntornnond, R., & Chua, C. K. (2015) · Engineering · doi:10.15302/j-eng-2015061 · Cited by 461
Butscher, A., Bohner, M., Hofmann, S., Gauckler, L., & Müller, R. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.09.039 · Cited by 459
Novel biomaterial strategies for controlled growth factor delivery for biomedical applications
Wang, Z., Wang, Z., Lu, W. W., Zhen, W., Yang, D., & Peng, S. (2017) · NPG Asia Materials · doi:10.1038/am.2017.171 · Cited by 446
Santos, M. I., & Reis, R. L. (2010) · Macromolecular Bioscience · doi:10.1002/mabi.200900107 · Cited by 443
Duan, B., Wang, M., Zhou, W. Y., Cheung, W. L., Li, Z. Y., & Lu, W. W. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.06.024 · Cited by 420
Autologous Bone Graft: Properties and Techniques
Pape, H. C., Evans, A., & Kobbe, P. (2010) · Journal of Orthopaedic Trauma · doi:10.1097/bot.0b013e3181cec4a1 · Cited by 417
Oropallo, W., & Piegl, L. A. (2015) · Engineering With Computers · doi:10.1007/s00366-015-0407-0 · Cited by 406
The Early Fracture Hematoma and Its Potential Role in Fracture Healing
Kolar, P., Schmidt-Bleek, K., Schell, H., Gaber, T., Toben, D., Schmidmaier, G., Perka, C., Buttgereit, F., & Duda, G. N. (2010) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2009.0687 · Cited by 403
The thermal effects on electrospinning of polylactic acid melts
Zhou, H., Green, T. B., & Joo, Y. L. (2006) · Polymer · doi:10.1016/j.polymer.2006.08.042 · Cited by 399
Additively manufactured biodegradable porous magnesium
Li, Y., Zhou, J., Pavanram, P., Leeflang, M. A., Fockaert, L. I., Pouran, B., Tümer, N., Schröder, K.-U., Mol, J. M. C., Weinans, H., et al. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.12.008 · Cited by 396
Biomimetic Materials and Fabrication Approaches for Bone Tissue Engineering
Kim, H. D., Amirthalingam, S., Kim, S. L., Lee, S. S., Rangasamy, J., & Hwang, N. S. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201700612 · Cited by 392
Additive manufacturing of scaffolds with sub-micron filaments via melt electrospinning writing
Hochleitner, G., Jüngst, T., Brown, T. D., Hahn, K., Moseke, C., Jakob, F., Dalton, P. D., & Groll, J. (2015) · Biofabrication · doi:10.1088/1758-5090/7/3/035002 · Cited by 385
3D Printing of Calcium Phosphate Ceramics for Bone Tissue Engineering and Drug Delivery
Trombetta, R., Inzana, J. A., Schwarz, E. M., Kates, S. L., & Awad, H. A. (2017) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1678-3 · Cited by 377
Polyhydroxyalkanoate (PHA)/Inorganic Phase Composites for Tissue Engineering Applications
Misra, S. K., Valappil, S. P., Roy, I., & Boccaccini, A. R. (2006) · Biomacromolecules · doi:10.1021/bm060317c · Cited by 372
Characterization of printed PLA scaffolds for bone tissue engineering
Grémare, A., Guduric, V., Bareille, R., Heroguez, V., Latour, S., L'heureux, N., Fricain, J., Catros, S., & Le Nihouannen, D. (2018) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.36289 · Cited by 362
A Review of Three-Dimensional Printing in Tissue Engineering
Sears, N. A., Seshadri, D. R., Dhavalikar, P. S., & Cosgriff-Hernandez, E. (2016) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2015.0464 · Cited by 360
Sahoo, S., Ang, L. T., Goh, J. C., & Toh, S. (2010) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.32645 · Cited by 346
Needleless Melt‐Electrospinning of Polypropylene Nanofibres
Fang, J., Zhang, L., Sutton, D., Wang, X., & Lin, T. (2012) · Journal of Nanomaterials · doi:10.1155/2012/382639 · Cited by 334
Bignon, A., Chouteau, J., Chevalier, J., Fantozzi, G., Carret, J.-P., Chavassieux, P., Boivin, G., Melin, M., & Hartmann, D. (2003) · Journal of Materials Science: Materials in Medicine · doi:10.1023/b:jmsm.0000004006.90399.b4 · Cited by 326
Du, Y., Liu, H., Yang, Q., Wang, S., Wang, J., Ma, J., Noh, I., Mikos, A. G., & Zhang, S. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2017.05.021 · Cited by 322
Kim, T. G., Chung, H. J., & Park, T. G. (2008) · Acta Biomaterialia · doi:10.1016/j.actbio.2008.06.008 · Cited by 319
3D printing of bone substitute implants using calcium phosphate and bioactive glasses
Bergmann, C., Lindner, M., Zhang, W., Koczur, K., Kirsten, A., Telle, R., & Fischer, H. (2010) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2010.04.037 · Cited by 311
Warnke, P. H., Douglas, T., Wollny, P., Sherry, E., Steiner, M., Galonska, S., Becker, S. T., Springer, I. N., Wiltfang, J., & Sivananthan, S. (2009) · Tissue Engineering Part C: Methods · doi:10.1089/ten.tec.2008.0288 · Cited by 305
3D-printed Bioresorbable Scaffold for Periodontal Repair
Rasperini, G., Pilipchuk, S. P., Flanagan, C. L., Park, C. H., Pagni, G., Hollister, S. J., & Giannobile, W. V. (2015) · Journal of Dental Research · doi:10.1177/0022034515588303 · Cited by 304
Sintering and robocasting of β-tricalcium phosphate scaffolds for orthopaedic applications
Miranda, P., Saiz, E., Gryn, K., & Tomsia, A. P. (2006) · Acta Biomaterialia · doi:10.1016/j.actbio.2006.02.004 · Cited by 304
Boccaccini, A. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00275-6 · Cited by 303
Mechanical properties of calcium phosphate scaffolds fabricated by robocasting
Miranda, P., Pajares, A., Saiz, E., Tomsia, A. P., & Guiberteau, F. (2008) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.31587 · Cited by 301
Hutmacher, D. W., & Dalton, P. D. (2011) · Chemistry – An Asian Journal · doi:10.1002/asia.201000436 · Cited by 301
Powder-based 3D printing for bone tissue engineering
Brunello, G., Sivolella, S., Meneghello, R., Ferroni, L., Gardin, C., Piattelli, A., Zavan, B., & Bressan, E. (2016) · Biotechnology Advances · doi:10.1016/j.biotechadv.2016.03.009 · Cited by 296
Scaffolds for bone healing: Concepts, materials and evidence
Lichte, P., Pape, H. C., Pufe, T., Kobbe, P., & Fischer, H. (2011) · Injury · doi:10.1016/j.injury.2011.03.033 · Cited by 295
High Strength and High Modulus Electrospun Nanofibers
Yao, J., Bastiaansen, C., & Peijs, T. (2014) · Fibers · doi:10.3390/fib2020158 · Cited by 270
Engineering anatomically shaped vascularized bone grafts with hASCs and 3D-printed PCL scaffolds
Temple, J. P., Hutton, D. L., Hung, B. P., Huri, P. Y., Cook, C. A., Kondragunta, R., Jia, X., & Grayson, W. L. (2014) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.35107 · Cited by 268
Park, S. H., Kim, T. G., Kim, H. C., Yang, D.-Y., & Park, T. G. (2008) · Acta Biomaterialia · doi:10.1016/j.actbio.2008.03.019 · Cited by 266
Electrospinning and additive manufacturing: converging technologies
Dalton, P. D., Vaquette, C., Farrugia, B. L., Dargaville, T. R., Brown, T. D., & Hutmacher, D. W. (2013) · Biomater. Sci. · doi:10.1039/c2bm00039c · Cited by 264
Angiogenic factors in bone local environment
Chim, S. M., Tickner, J., Chow, S. T., Kuek, V., Guo, B., Zhang, G., Rosen, V., Erber, W., & Xu, J. (2013) · Cytokine & Growth Factor Reviews · doi:10.1016/j.cytogfr.2013.03.008 · Cited by 264
Su, Y., Su, Q., Liu, W., Lim, M., Venugopal, J. R., Mo, X., Ramakrishna, S., Al-Deyab, S. S., & El-Newehy, M. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.11.002 · Cited by 261
Chen, H., Wei, Q., Wen, S., Li, Z., & Shi, Y. (2017) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2017.08.004 · Cited by 260
Biodegradable and bioactive porous scaffold structures prepared using fused deposition modeling
Korpela, J., Kokkari, A., Korhonen, H., Malin, M., Närhi, T., & Seppälä, J. (2013) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.32863 · Cited by 258
Vozzi, G., Previti, A., De Rossi, D., & Ahluwalia, A. (2002) · Tissue Engineering · doi:10.1089/107632702320934182 · Cited by 249
Zhou, W. Y., Lee, S. H., Wang, M., Cheung, W. L., & Ip, W. Y. (2008) · Journal of Materials Science: Materials in Medicine · doi:10.1007/s10856-007-3089-3 · Cited by 247
Khalyfa, A., Vogt, S., Weisser, J., Grimm, G., Rechtenbach, A., Meyer, W., & Schnabelrauch, M. (2007) · Journal of Materials Science: Materials in Medicine · doi:10.1007/s10856-006-0073-2 · Cited by 247
Yoon, J. J., & Park, T. G. (2001) · Journal of Biomedical Materials Research · doi:10.1002/1097-4636(20010605)55:3<401::aid-jbm1029>3.0.co;2-h · Cited by 244
Three-Dimensional Bioprinting for Regenerative Dentistry and Craniofacial Tissue Engineering
Obregon, F., Vaquette, C., Ivanovski, S., Hutmacher, D. W., & Bertassoni, L. E. (2015) · Journal of Dental Research · doi:10.1177/0022034515588885 · Cited by 242
Zhou, Z., Buchanan, F., Mitchell, C., & Dunne, N. (2014) · Materials Science and Engineering: C · doi:10.1016/j.msec.2014.01.027 · Cited by 241
3D bioprinting and the current applications in tissue engineering
Huang, Y., Zhang, X., Gao, G., Yonezawa, T., & Cui, X. (2017) · Biotechnology Journal · doi:10.1002/biot.201600734 · Cited by 240
Binder-jetting 3D printing and alloy development of new biodegradable Fe-Mn-Ca/Mg alloys
Hong, D., Chou, D.-T., Velikokhatnyi, O. I., Roy, A., Lee, B., Swink, I., Issaev, I., Kuhn, H. A., & Kumta, P. N. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2016.08.032 · Cited by 234
Multiscale three-dimensional scaffolds for soft tissue engineering via multimodal electrospinning
Soliman, S., Pagliari, S., Rinaldi, A., Forte, G., Fiaccavento, R., Pagliari, F., Franzese, O., Minieri, M., Di Nardo, P., Licoccia, S., et al. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.10.051 · Cited by 226
Kumar, A., Mandal, S., Barui, S., Vasireddi, R., Gbureck, U., Gelinsky, M., & Basu, B. (2016) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2016.01.001 · Cited by 225
Zhang, X.-Y., Fang, G., & Zhou, J. (2017) · Materials · doi:10.3390/ma10010050 · Cited by 222
Barba, A., Diez-Escudero, A., Maazouz, Y., Rappe, K., Espanol, M., Montufar, E. B., Bonany, M., Sadowska, J. M., Guillem-Marti, J., Öhman-Mägi, C., et al. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b14175 · Cited by 219
Castilho, M., Moseke, C., Ewald, A., Gbureck, U., Groll, J., Pires, I., Teßmar, J., & Vorndran, E. (2014) · Biofabrication · doi:10.1088/1758-5082/6/1/015006 · Cited by 211
Selective laser sintering of biocompatible polymers for applications in tissue engineering
Tan, K. H., Chua, C. K., Leong, K. F., Cheah, C. M., Gui, W. S., Tan, W. S., & Wiria, F. E. (2005) · Bio-Medical Materials and Engineering · doi:10.1177/0959298920050151-2012 · Cited by 207
Dirckx, N., Van Hul, M., & Maes, C. (2013) · Birth Defects Research Part C: Embryo Today: Reviews · doi:10.1002/bdrc.21047 · Cited by 201
Kai, D., Prabhakaran, M. P., Stahl, B., Eblenkamp, M., Wintermantel, E., & Ramakrishna, S. (2012) · Nanotechnology · doi:10.1088/0957-4484/23/9/095705 · Cited by 200
Bandyopadhyay, A., Bose, S., & Das, S. (2015) · MRS Bulletin · doi:10.1557/mrs.2015.3 · Cited by 198
Warnke, P. H., Seitz, H., Warnke, F., Becker, S. T., Sivananthan, S., Sherry, E., Liu, Q., Wiltfang, J., & Douglas, T. (2010) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.31577 · Cited by 192
Additive manufacturing of polymer melts for implantable medical devices and scaffolds
Youssef, A., Hollister, S. J., & Dalton, P. D. (2017) · Biofabrication · doi:10.1088/1758-5090/aa5766 · Cited by 190
Emerging bone tissue engineering via Polyhydroxyalkanoate (PHA)-based scaffolds
Lim, J., You, M., Li, J., & Li, Z. (2017) · Materials Science and Engineering: C · doi:10.1016/j.msec.2017.05.132 · Cited by 189
Selective laser sintering of hydroxyapatite/poly-ε-caprolactone scaffolds
Eosoly, S., Brabazon, D., Lohfeld, S., & Looney, L. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.07.018 · Cited by 186
Robocasting of 45S5 bioactive glass scaffolds for bone tissue engineering
Eqtesadi, S., Motealleh, A., Miranda, P., Pajares, A., Lemos, A., & Ferreira, J. M. F. (2014) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2013.08.003 · Cited by 183
Porous ceramic bone scaffolds for vascularized bone tissue regeneration
Will, J., Melcher, R., Treul, C., Travitzky, N., Kneser, U., Polykandriotis, E., Horch, R., & Greil, P. (2008) · Journal of Materials Science: Materials in Medicine · doi:10.1007/s10856-007-3346-5 · Cited by 179
Concise Review: Bioprinting of Stem Cells for Transplantable Tissue Fabrication
Leberfinger, A. N., Ravnic, D. J., Dhawan, A., & Ozbolat, I. T. (2017) · Stem Cells Translational Medicine · doi:10.1002/sctm.17-0148 · Cited by 175
Biocomposite nanofibres and osteoblasts for bone tissue engineering
Venugopal, J., Vadgama, P., Kumar, T. S. S., & Ramakrishna, S. (2007) · Nanotechnology · doi:10.1088/0957-4484/18/5/055101 · Cited by 171
Optimization of scaffold design for bone tissue engineering: A computational and experimental study
Dias, M. R., Guedes, J. M., Flanagan, C. L., Hollister, S. J., & Fernandes, P. R. (2014) · Medical Engineering & Physics · doi:10.1016/j.medengphy.2014.02.010 · Cited by 171
Differential roles for small leucine-rich proteoglycans in bone formation
Department of Dental Health and Biological Sciences, U. O. W. C. O. M., Waddington, R., Roberts, H., Sugars, R., & Schönherr, E. (2003) · European Cells and Materials · doi:10.22203/ecm.v006a02 · Cited by 171
Asadi-Eydivand, M., Solati-Hashjin, M., Farzad, A., & Abu Osman, N. A. (2016) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2015.06.005 · Cited by 161
Kolan, K. C. R., Leu, M. C., Hilmas, G. E., Brown, R. F., & Velez, M. (2011) · Biofabrication · doi:10.1088/1758-5082/3/2/025004 · Cited by 161
Synthesis and characterization of porous β-tricalcium phosphate blocks
Bohner, M., van Lenthe, G. H., Grünenfelder, S., Hirsiger, W., Evison, R., & Müller, R. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.03.026 · Cited by 158
Co-culture in cartilage tissue engineering
Hendriks, J., Riesle, J., & van Blitterswijk, C. (2007) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.19 · Cited by 155
Eshraghi, S., & Das, S. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.04.022 · Cited by 153
Design of porous polymeric scaffolds by gas foaming of heterogeneous blends
Salerno, A., Oliviero, M., Maio, E. D., Iannace, S., & Netti, P. A. (2009) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-009-3767-4 · Cited by 152
Naghieh, S., Karamooz-Ravari, M. R., Badrossamay, M., Foroozmehr, E., & Kadkhodaei, M. (2016) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2016.01.031 · Cited by 148
Differential effects of hypoxia on osteochondrogenic potential of human adipose-derived stem cells
Merceron, C., Vinatier, C. S., Portron, S., Masson, M., Amiaud, J., Guigand, L., Chérel, Y., Weiss, P., & Guicheux, J. (2009) · American Journal of Physiology-Cell Physiology · doi:10.1152/ajpcell.00398.2009 · Cited by 147
Kang, M. S., Kim, J.-H., Singh, R. K., Jang, J., & Kim, H. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.12.028 · Cited by 143
Application of micro CT and computation modeling in bone tissue engineering
Tuan, H. S., & Hutmacher, D. W. (2005) · Computer-Aided Design · doi:10.1016/j.cad.2005.02.006 · Cited by 139
Octacalcium phosphate (OCP)-based bone substitute materials
Suzuki, O. (2013) · Japanese Dental Science Review · doi:10.1016/j.jdsr.2013.01.001 · Cited by 139
Montjovent, M., Mathieu, L., Hinz, B., Applegate, L., Bourban, P. ‐., Zambelli, P., Månson, J. E., & Pioletti, D. P. (2005) · Tissue Engineering · doi:10.1089/ten.2005.11.1640 · Cited by 137
Micro-CT finite element model and experimental validation of trabecular bone damage and fracture
Hambli, R. (2013) · Bone · doi:10.1016/j.bone.2013.06.028 · Cited by 136
Combined additive manufacturing approaches in tissue engineering
Giannitelli, S. M., Mozetic, P., Trombetta, M., & Rainer, A. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2015.06.032 · Cited by 135
Partee, B., Hollister, S. J., & Das, S. (2005) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.2162589 · Cited by 135
Elomaa, L., Pan, C., Shanjani, Y., Malkovskiy, A. V., Seppälä, J. V., & Yang, Y. (2015) · Journal of Materials Chemistry B · doi:10.1039/c5tb01468a · Cited by 131
Additive manufacturing of wet-spun polymeric scaffolds for bone tissue engineering
Puppi, D., Mota, C., Gazzarri, M., Dinucci, D., Gloria, A., Myrzabekova, M., Ambrosio, L., & Chiellini, E. (2012) · Biomedical Microdevices · doi:10.1007/s10544-012-9677-0 · Cited by 131
Goh, B. T., Teh, L. Y., Tan, D. B. P., Zhang, Z., & Teoh, S. H. (2014) · Clinical Oral Implants Research · doi:10.1111/clr.12486 · Cited by 130
Barui, S., Chatterjee, S., Mandal, S., Kumar, A., & Basu, B. (2016) · Materials Science and Engineering C · doi:10.1016/j.msec.2016.09.040 · Cited by 130
Torres, F. G., Nazhat, S. N., Fadzullah, S. H. S. M., Maquet, V., & Boccaccini, A. R. (2006) · Composites Science and Technology · doi:10.1016/j.compscitech.2006.05.018 · Cited by 129
Tarafder, S., Dernell, W. S., Bandyopadhyay, A. K., & Bose, S. (2014) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.33239 · Cited by 129
Zhou, C., Yang, K., Wang, K., Pei, X., Dong, Z., Hong, Y., & Zhang, X. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.07.094 · Cited by 129
Rodrigues, S. C., Salgado, C. L., Sahu, A., Garcia, M. P., Fernandes, M. H., & Monteiro, F. J. (2013) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.34394 · Cited by 127
Dean, D., Wallace, J., Siblani, A., Wang, M. O., Kim, K., Mikos, A. G., & Fisher, J. P. (2012) · Virtual and Physical Prototyping · doi:10.1080/17452759.2012.673152 · Cited by 127
Yang, W., Choi, W. S., Leung, Y. Y., Curtin, J. P., Du, R., Zhang, C.-Y., Chen, X., & Su, Y. (2018) · Oral Oncology · doi:10.1016/j.oraloncology.2018.01.005 · Cited by 127
Fabrication of Patterned Nanofibrous Mats Using Direct-Write Electrospinning
Lee, J., Lee, S. Y., Jang, J., Jeong, Y. H., & Cho, D. (2012) · Langmuir · doi:10.1021/la3009249 · Cited by 126
Design of Artificial Human Joints & Organs
Pal, S. (2013) · Springer eBooks · doi:10.1007/978-1-4614-6255-2 · Cited by 126
Qi, X., Pei, P., Zhu, M. C., Du, X., Xin, C., Zhao, S., Li, X., & Zhu, Y. (2017) · Scientific Reports · doi:10.1038/srep42556 · Cited by 125
Selective laser melting of pure Zn with high density for biodegradable implant manufacturing
Demir, A. G., Monguzzi, L., & Previtali, B. (2017) · Additive manufacturing · doi:10.1016/j.addma.2017.03.004 · Cited by 125
Mesenchymal stem cells: mechanisms and role in bone regeneration
Qin, Y., Guan, J., & Zhang, C. (2014) · Postgraduate Medical Journal · doi:10.1136/postgradmedj-2013-132387 · Cited by 122
Lv, J., Xiu, P., Tan, J., Jia, Z., Cai, H., & Liu, Z. (2015) · Biomedical Materials · doi:10.1088/1748-6041/10/3/035013 · Cited by 122
Influence of 3D printed porous architecture on mesenchymal stem cell enrichment and differentiation
Ferlin, K. M., Prendergast, M. E., Miller, M. L., Kaplan, D. S., & Fisher, J. P. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2016.01.007 · Cited by 120
Layered manufacturing of tissue engineering scaffolds via multi-nozzle deposition
Yan, Y., Xiong, Z., Hu, Y., et al. (2003) · Materials Letters · doi:10.1016/s0167-577x(02)01339-3 · Cited by 119
Computational design of tissue engineering scaffolds
Hollister, S. J., & Lin, C. Y. (2007) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2006.09.023 · Cited by 118
Direct ink writing of highly bioactive glasses
Nommeots‐Nomm, A., Lee, P. D., & Jones, J. R. (2017) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2017.08.006 · Cited by 117
Shuai, C., Mao, Z., Lu, H., et al. (2013) · Biofabrication · doi:10.1088/1758-5082/5/1/015014 · Cited by 116
Roskies, M. G., Jordan, J., Fang, D., Abdallah, M., Hier, M. P., Mlynarek, A., Tamimi, F., & Tran, S. D. (2016) · Journal of Biomaterials Applications · doi:10.1177/0885328216638636 · Cited by 116
Liao, H.-T., Lee, M., Tsai, W., Wang, H.-C., & Lu, W.-C. (2013) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.1811 · Cited by 115
Fabrication of computationally designed scaffolds by low temperature 3D printing
Castilho, M. D., Dias, M., Gbureck, U., Gröll, J., Fernandes, P. R., Pires, I., Gouveia, B., Rodrigues, J. M. C., & Vorndran, E. (2013) · Biofabrication · doi:10.1088/1758-5082/5/3/035012 · Cited by 113
Cell and protein compatible 3D bioprinting of mechanically strong constructs for bone repair
Sawkins, M. J., Mistry, P., Brown, B. N., Shakesheff, K. M., Bonassar, L. J., & Yang, J. (2015) · Biofabrication · doi:10.1088/1758-5090/7/3/035004 · Cited by 110
Additive Biomanufacturing: An Advanced Approach for Periodontal Tissue Regeneration
Carter, S. D., Costa, P. F., Vaquette, C., Ivanovski, S., Hutmacher, D. W., & Malda, J. (2016) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1687-2 · Cited by 109
Bhat, S., & Kumar, A. (2012) · Journal of Bioscience and Bioengineering · doi:10.1016/j.jbiosc.2012.07.005 · Cited by 107
Fabrication of magnesium using selective laser melting technique
Ng, C. C., Savalani, M. M., & Man, H. C. (2011) · Rapid Prototyping Journal · doi:10.1108/13552541111184206 · Cited by 106
Moisture based three-dimensional printing of calcium phosphate structures for scaffold engineering
Butscher, A., Bohner, M., Doebelin, N., Galea, L., Loeffel, O., & Müller, R. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.10.009 · Cited by 106
Li, J., Liu, X., Zuo, B., & Zhang, L. (2016) · Aging and Disease · doi:10.14336/ad.2015.1206 · Cited by 106
Modeling of non-isothermal polymer jets in melt electrospinning
Zhmayev, E., Zhou, H., & Joo, Y. L. (2008) · Journal of Non-Newtonian Fluid Mechanics · doi:10.1016/j.jnnfm.2007.11.011 · Cited by 104
HYDROTROPY: A PROMISING TOOL FOR SOLUBILITY ENHANCEMENT: A REVIEW
Nidhi, K., Indrajeet, S., Khushboo, M., et al. (2011) · International Journal of Drug Development and Research · Cited by 104
Laser melting functionally graded composition of Waspaloy® and Zirconia powders
Mumtaz, K., & Hopkinson, N. (2007) · Journal of Materials Science · doi:10.1007/s10853-007-1661-3 · Cited by 103
3D Powder Printed Bioglass and β-Tricalcium Phosphate Bone Scaffolds
Seidenstuecker, M., Kerr, L., Bernstein, A., Mayr, H. O., Suedkamp, N. P., Gadow, R., Krieg, P., Latorre, S. H., Thomann, R., Syrowatka, F., et al. (2017) · Materials · doi:10.3390/ma11010013 · Cited by 103
Ren, J., Blackwood, K. A., Doustgani, A., Poh, P. S. P., Steck, R., Stevens, M. M., & Woodruff, M. A. (2013) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.34985 · Cited by 101
Zhang, H., Mao, X., Zhao, D., Jiang, W., Du, Z., Li, Q., Jiang, C.-H., & Han, D. (2017) · Scientific Reports · doi:10.1038/s41598-017-14923-7 · Cited by 101
Jing, X., Mi, H., & Turng, L. (2016) · Materials Science and Engineering C · doi:10.1016/j.msec.2016.11.049 · Cited by 96
Open-Source Selective Laser Sintering (OpenSLS) of Nylon and Biocompatible Polycaprolactone
Kinstlinger, I. S., Andreas, B., Paulsen, S. J., Hwang, D. H., Ta, A. H., Yalacki, D. R., Schmidt, T., & Miller, J. S. (2016) · PLoS ONE · doi:10.1371/journal.pone.0147399 · Cited by 95
Modeling of melt electrospinning for semi-crystalline polymers
Zhmayev, E., Cho, D., & Joo, Y. L. (2009) · Polymer · doi:10.1016/j.polymer.2009.11.025 · Cited by 93
Marques, C. F., Perera, F. H., Marote, A., Ferreira, S., Vieira, S. I., Olhero, S. M., Miranda, P., & Ferreira, J. M. F. (2016) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2016.08.018 · Cited by 93
Saska, S., Pires, L. C., Cominotte, M. A., Mendes, L. S., de Oliveira, M. F., Maia, I. A., da Silva, J. V. L., Ribeiro, S. J. L., & Cirelli, J. A. (2018) · Materials Science and Engineering C · doi:10.1016/j.msec.2018.04.016 · Cited by 93
Li, C., Jiang, C., Deng, Y., Li, T., Li, N., Peng, M., & Wang, J. (2017) · Scientific Reports · doi:10.1038/srep41331 · Cited by 92
Oxygen as a critical determinant of bone fracture healing—A multiscale model
Carlier, A., Geris, L., van Gastel, N., Carmeliet, G., & Oosterwyck, H. V. (2014) · Journal of Theoretical Biology · doi:10.1016/j.jtbi.2014.10.012 · Cited by 91
Abarrategi, A., Moreno-Vicente, C., Martínez-Vázquez, F. J., et al. (2012) · PLoS ONE · doi:10.1371/journal.pone.0034117 · Cited by 91
Bölgen, N., Yang, Y., Korkusuz, P., Güzel, E., Haj, A. J. E., & Pişkın, E. (2008) · Tissue Engineering Part A · doi:10.1089/ten.tea.2007.0277 · Cited by 91
Fundamental Biomechanics in Bone Tissue Engineering
Wang, X., Nyman, J. S., Dong, X., Leng, H., & Reyes, M. (2010) · Synthesis lectures on tissue engineering · doi:10.1007/978-3-031-02579-2 · Cited by 91
Formation of porous HPCL/LPCL/HA scaffolds with supercritical CO2 gas foaming method
Moghadam, M., Hassanajili, S., Esmaeilzadeh, F., Ayatollahi, M., & Ahmadi, M. (2017) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2016.12.014 · Cited by 91
Du, Y., Liu, H., Jiaqi, S., Wang, J., Ma, J., & Zhang, S. (2015) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2015.06.074 · Cited by 89
Thavornyutikarn, B., Tesavibul, P., Sitthiseripratip, K., Chantarapanich, N., Feltis, B., Wright, P., & Turney, T. W. (2017) · Materials Science and Engineering C · doi:10.1016/j.msec.2017.03.001 · Cited by 88
Dadsetan, M., Guda, T., Runge, M. B., Mijares, D. Q., LeGeros, R. Z., LeGeros, J. P., Silliman, D. T., Lu, L., Wenke, J. C., Baer, P. R. B., et al. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.12.024 · Cited by 87
Hydroxyapatite-chitosan based bioactive hybrid biomaterials with improved mechanical strength
Zima, A. (2017) · Spectrochimica Acta Part A Molecular and Biomolecular Spectroscopy · doi:10.1016/j.saa.2017.12.008 · Cited by 86
Deng, Y., Jiang, C., Li, C., Li, T., Peng, M., Wang, J., & Dai, K. (2017) · Scientific Reports · doi:10.1038/s41598-017-05196-1 · Cited by 85
Poly(3-hydroxybutyrate-co-3-hydroxyhexanoate)-based scaffolds for tissue engineering
Chang, H. M., Wang, Z., Luo, H., Xu, M., Ren, X., Zheng, G., Wu, B., Zhang, X., Lu, X., Chen, F., et al. (2014) · Brazilian Journal of Medical and Biological Research · doi:10.1590/1414-431x20143930 · Cited by 83
3D printing-assisted design of scaffold structures
Kantaros, A., Chatzidai, N., & Karalekas, D. (2015) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-015-7386-6 · Cited by 81
Polylactides in additive biomanufacturing
Poh, P. S. P., Chhaya, M. P., Wunner, F. M., De‐Juan‐Pardo, E. M., Schilling, A. F., Schantz, J., van Griensven, M., & Hutmacher, D. W. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.07.006 · Cited by 81
Design of electrospun nanofibrous mats for osteogenic differentiation of mesenchymal stem cells
Wang, S., Hu, F., Li, J., Zhang, S., Shen, M., Huang, M., & Shi, X. (2017) · Nanomedicine Nanotechnology Biology and Medicine · doi:10.1016/j.nano.2016.12.024 · Cited by 80
Wei, Q., Wang, Y., Chai, W., Zhang, Y., & Chen, D. (2017) · Ceramics International · doi:10.1016/j.ceramint.2017.07.082 · Cited by 79
Shuai, C., Li, Y., Feng, P., Guo, W., Yang, W., & Peng, S. (2018) · Polymer Testing · doi:10.1016/j.polymertesting.2018.03.042 · Cited by 79
He, J., Xia, P., & Li, D. (2016) · Biofabrication · doi:10.1088/1758-5090/8/3/035008 · Cited by 78
Endosteal-like extracellular matrix expression on melt electrospun written scaffolds
Muerza-Cascante, M. L., Shokoohmand, A., Khosrotehrani, K., Haylock, D. N., Dalton, P. D., Hutmacher, D. W., & Loessner, D. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2016.12.040 · Cited by 78
Gandolfi, M. G., Zamparini, F., Esposti, M. D., Chiellini, E., Aparicio, C., Fava, F., Fabbri, P., Taddei, P., & Prati, C. (2017) · Materials Science and Engineering C · doi:10.1016/j.msec.2017.08.040 · Cited by 77
Castilho, M. D., Dias, M., Vorndran, E., Gbureck, U., Fernandes, P. R., Pires, I., Gouveia, B., Armés, H., Pires, E. B., & Rodrigues, J. M. C. (2014) · Biofabrication · doi:10.1088/1758-5082/6/2/025005 · Cited by 76
Poly(ε-caprolactone) Scaffolds Fabricated by Melt Electrospinning for Bone Tissue Engineering
Zaiss, S., Brown, T. D., Reichert, J. C., & Berner, A. (2016) · Materials · doi:10.3390/ma9040232 · Cited by 75
Hassan, M. I., Sultana, N., & Hamdan, S. (2014) · Journal of Nanomaterials · doi:10.1155/2014/573238 · Cited by 74
Asadi‐Eydivand, M., Solati‐Hashjin, M., Shafiei, S. S., Mohammadi, S., Hafezi, M., & Osman, N. A. A. (2016) · PLoS ONE · doi:10.1371/journal.pone.0151216 · Cited by 74
Extracellular matrix-based cryogels for cartilage tissue engineering
Han, M.-E., Kim, S.-H., Kim, H. D., Yim, H.-G., Bencherif, S. A., Kim, T., & Hwang, N. S.-Y. (2016) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2016.05.024 · Cited by 73
van Bochove, B., Hannink, G., Buma, P., & Grijpma, D. W. (2016) · Macromolecular Bioscience · doi:10.1002/mabi.201600290 · Cited by 73
Polymeric cryogels : macroporous gels with remarkable properties
Okay, O. (2014) · Advances in polymer science · doi:10.1007/978-3-319-05846-7 · Cited by 73
Kemençe, N., & Bölgen, N. (2013) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.1813 · Cited by 72
A simple method for fabricating 3-D multilayered composite scaffolds
Vaquette, C., & Cooper-White, J. J. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.08.015 · Cited by 72
Cavo, M., & Scaglione, S. (2016) · Materials Science and Engineering C · doi:10.1016/j.msec.2016.07.041 · Cited by 72
Raina, D. B., Isaksson, H., Teotia, A. K., Lidgren, L., Tägil, M., & Kumar, A. (2016) · Journal of Controlled Release · doi:10.1016/j.jconrel.2016.05.061 · Cited by 71
Mazzoli, A., Ferretti, C., Gigante, A. P., Salvolini, E., & Mattioli‐Belmonte, M. (2015) · Rapid Prototyping Journal · doi:10.1108/rpj-04-2013-0040 · Cited by 70
Mota, C., Wang, S.-Y., Puppi, D., Gazzarri, M., Migone, C., Chiellini, E., Chen, G., & Chiellini, E. (2014) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.1897 · Cited by 70
Wallace, J., Wang, M. O., Thompson, P., Busso, M., Belle, V., Mammoser, N., Kim, K., Fisher, J. P., Siblani, A., Xu, Y., et al. (2014) · Biofabrication · doi:10.1088/1758-5082/6/1/015003 · Cited by 70
Salgado, C. L., Grenho, L., Fernandes, M. H., Colaço, B., & Monteiro, F. J. (2015) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.35540 · Cited by 70
The cross-disciplinary emergence of 3D printed bioceramic scaffolds in orthopedic bioengineering
Jazayeri, H. E., Rodriguez-Romero, M., Razavi, M., Tahriri, M., Ganjawalla, K. P., Rasoulianboroujeni, M., Malekoshoaraie, M. H., Khoshroo, K., & Tayebi, L. (2017) · Ceramics International · doi:10.1016/j.ceramint.2017.09.095 · Cited by 69
Binary polyhydroxyalkanoate systems for soft tissue engineering
Lukasiewicz, B., Basnett, P., Nigmatullin, R., Matharu, R. K., Knowles, J. C., & Roy, I. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.02.027 · Cited by 68
Lindner, M., Höges, S., Meiners, W., Wissenbach, K., Smeets, R., Telle, R., Poprawe, R., & Fischer, H. (2011) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.33058 · Cited by 66
Shakir, M., Jolly, R., Khan, M. S., Rauf, A., & Kazmi, S. (2016) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2016.08.046 · Cited by 66
Effective method for multi-scale gradient porous scaffold design and fabrication
Yang, N., & Zhou, K. (2014) · Materials Science and Engineering C · doi:10.1016/j.msec.2014.07.052 · Cited by 64
Cited by
Normal Bone Anatomy and Physiology
Clarke, B. (2008) · Clinical Journal of the American Society of Nephrology · doi:10.2215/cjn.04151206 · Cited by 2,192
Scaffold Fabrication Technologies and Structure/Function Properties in Bone Tissue Engineering
Collins, M. N., Ren, G., Young, K., Pina, S., Reis, R. L., & Oliveira, J. M. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202010609 · Cited by 867
Effect of the nano/microscale structure of biomaterial scaffolds on bone regeneration
Zhu, L., Luo, D., & Liu, Y. (2020) · International Journal of Oral Science · doi:10.1038/s41368-020-0073-y · Cited by 458
Wang, R., Shi, M., Xu, F., Qiu, Y., Zhang, P., Shen, K., Zhao, Q., Yu, J., & Zhang, Y. (2020) · Nature Communications · doi:10.1038/s41467-020-18267-1 · Cited by 441
Fabrication of Biomedical Scaffolds Using Biodegradable Polymers.
Kirillova, A., Yeazel, T. R., Asheghali, D., Petersen, S. R., Dort, S., Gall, K., & Becker, M. L. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c01200 · Cited by 368
Metadata
- Authors
- Wubneh, A., Tsekoura, E. K., Ayranci, C., & Uludağ, H.
- Venue
- Acta Biomaterialia
- Publisher
- Elsevier BV
- Published
- 2018-10
- Volume
- 80
- Pages
- 1-30
- ISSN
- 1742-7061 (ISSN-L)
- OpenAlex
- W2893267824
- Cited by
- 584
- References
- 266
- FWCI
- 16.23
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.