The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Multi-material additive manufacturing technologies for Ti-, Mg-, and Fe-based biomaterials for bone substitution
Open accessAbstract
The growing interest in multi-functional metallic biomaterials for bone substitutes challenges the current additive manufacturing (AM, =3D printing) technologies. It is foreseeable that advances in multi-material AM for metallic biomaterials will not only allow for complex geometrical designs, but also improve their multi-functionalities by tuning the types or compositions of the underlying base materials, thereby presenting unprecedented opportunities for advanced orthopedic treatments. AM technologies are yet to be extensively explored for the fabrication of multi-functional metallic biomaterials, especially for bone substitutes. The aim of this review is to present the viable options of the state-of-the-art multi-material AM for Ti-, Mg-, and Fe-based biomaterials to be used as bone substitutes. The review starts with a brief review of bone tissue engineering, the design requirements, and fabrication technologies for metallic biomaterials to highlight the advantages of using AM over conventional fabrication methods. Five AM technologies suitable for metal 3D printing are compared against the requirements for multi-material AM. Of these AM technologies, extrusion-based multi-material AM is shown to have the greatest potential to meet the requirements for the fabrication of multi-functional metallic biomaterials. Finally, recent progress in the fabrication of Ti-, Mg-, and Fe-based biomaterials including the utilization of multi-material AM technologies is reviewed so as to identify the knowledge gaps and propose the directions of further research for the development of multi-material AM technologies that are applicable for the fabrication of multi-functional metallic biomaterials. STATEMENT OF SIGNIFICANCE: Addressing a critical bone defect requires the assistance of multi-functional porous metallic bone substitutes. As one of the most advanced fabrication technology in bone tissue engineering, additive manufacturing is challenged for its viability in multi-material fabrication of metallic biomaterials. This article reviews how the current metal additive manufacturing technologies have been and can be used for multi-material fabrication of Ti-, Mg-, and Fe-based bone substitutes. Progress on the Ti-, Mg-, and Fe-based biomaterials, including the utilization of multi-material additive manufacturing, are discussed to direct future research for advancing the multi-functional additively manufactured metallic bone biomaterials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Direct Ink Writing of 3D Functional Materials
Lewis, J. A. (2006) · Advanced Functional Materials · doi:10.1002/adfm.200600434 · Cited by 1,740 · cited 1×
“materials should have viscoelastic properties that enable them to flow through the nozzle, solidify immediately upon extrusion, and maintain the shape even when they are stretched over the space of the underlying layers [88] .”
BackgroundGittens, R. A., McLachlan, T., Olivares-Navarrete, R., Cai, Y., Berner, S., Tannenbaum, R., Schwartz, Z., Sandhage, K. H., & Boyan, B. D. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2011.01.029 · Cited by 827
Robust and elastic lunar and martian structures from 3D-printed regolith inks
Jakus, A. E., Koube, K. D., Geisendorfer, N. R., & Shah, R. N. (2017) · Scientific Reports · doi:10.1038/srep44931 · Cited by 141
Cited by
Nazir, A., Gokcekaya, O., Md Masum Billah, K., Ertugrul, O., Jiang, J., Sun, J., & Hussain, S. (2023) · Materials & Design · doi:10.1016/j.matdes.2023.111661 · Cited by 773
Recent progress on additive manufacturing of multi-material structures with laser powder bed fusion
Wang, D., Liu, L., Deng, G., Deng, C., Bai, Y., Yang, Y., Wu, W., Chen, J., Liu, Y., Wang, Y., et al. (2022) · Virtual and Physical Prototyping · doi:10.1080/17452759.2022.2028343 · Cited by 363
Zhang, M., Zhao, N., Yu, Q., Liu, Z., Qu, R., Zhang, J., Li, S., Ren, D., Berto, F., Zhang, Z., et al. (2022) · Nature Communications · doi:10.1038/s41467-022-30873-9 · Cited by 267
Review on Additive Manufacturing of Multi-Material Parts: Progress and Challenges
Hasanov, S., Alkunte, S., Rajeshirke, M., Gupta, A., Huseynov, O., Fidan, I., Alifui-Segbaya, F., & Rennie, A. (2021) · Journal of Manufacturing and Materials Processing · doi:10.3390/jmmp6010004 · Cited by 258
Design, printing, and engineering of regenerative biomaterials for personalized bone healthcare
Jia, Z., Xu, X., Zhu, D., & Zheng, Y. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2023.101072 · Cited by 176
Metadata
- Authors
- Putra, N. E., Mirzaali, M. J., Apachitei, I., Zhou, J., & Zadpoor, A. A.
- Venue
- Acta Biomaterialia
- Publisher
- Elsevier BV
- Published
- 2020-06
- Volume
- 109
- Pages
- 1-20
- ISSN
- 1742-7061 (ISSN-L)
- OpenAlex
- W3014360934
- Cited by
- 243
- References
- 3
- FWCI
- 14.94
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.