The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Fractal scan strategies for selective laser melting of ‘unweldable’ nickel superalloys
Open accessAbstract
The high thermal gradients experienced during manufacture via selective laser melting commonly result in cracking of high γ/γ′ Nickel based superalloys. Such defects cannot be tolerated in applications where component integrity is of paramount importance. To overcome this, many industrial practitioners make use of hot isostatic pressing to ‘heal’ these defects. The possibility of such defects re-opening during the component life necessitates optimisation of SLM processing parameters in order to produce the highest bulk density and integrity in the as-built state. In this paper, novel fractal scanning strategies based upon mathematical fill curves, namely the Hilbert and Peano-Gosper curve, are explored in which the use of short vector length scans, in the order of 100 μm, is used as a method of reducing residual stresses. The effect on cracking observed in CM247LC superalloy samples was analysed using image processing, comparing the novel fractal scan strategies to more conventional ‘island’ scans. Scanning electron microscopy and energy dispersive X-ray spectroscopy was utilised to determine the cracking mechanisms. Results show that cracking occurs via two mechanisms, solidification and liquation, with a strong dependence on the laser scan vectors. Through the use of fractal scan strategies, bulk density can be increased by 2 ± 0.7% when compared to the ‘island’ scanning, demonstrating the potential of fractal scan strategies in the manufacture of typically ‘unweldable’ nickel superalloys.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Fiji: an open-source platform for biological-image analysis
Schindelin, J., Arganda-Carreras, I., Frise, E., Kaynig, V., Longair, M., Pietzsch, T., Preibisch, S., Rueden, C., Saalfeld, S., Schmid, B., et al. (2012) · Nature Methods · doi:10.1038/nmeth.2019 · Cited by 66,890
NIH Image to ImageJ: 25 years of image analysis
Schneider, C. A., Rasband, W. S., & Eliceiri, K. W. (2012) · Nature Methods · doi:10.1038/nmeth.2089 · Cited by 64,638 · cited 2×
“To analyse the cracking and porosity within the samples, the image processing software core package ImageJ [26] with the Fiji plugin bundle [27] was used, following the image processing steps outlined in Figure 5.”
Method
Cited by
Aboulkhair, N. T., Simonelli, M., Parry, L., Ashcroft, I., Tuck, C., & Hague, R. (2019) · Progress in Materials Science · doi:10.1016/j.pmatsci.2019.100578 · Cited by 1,552
Self-citationRevisiting fundamental welding concepts to improve additive manufacturing: From theory to practice
Oliveira, J. P., Santos, T. G., & Miranda, R. M. (2020) · Progress in Materials Science · doi:10.1016/j.pmatsci.2019.100590 · Cited by 617
Powder Bed Fusion of nickel-based superalloys: A review
Sanchez, S., Smith, P., Xu, Z., Gaspard, G., Hyde, C. J., Wits, W. W., Ashcroft, I. A., Chen, H., & Clare, A. T. (2021) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2021.103729 · Cited by 541
Self-citationMostafaei, A., Ghiaasiaan, R., Ho, I.-T., Strayer, S., Chang, K.-C., Shamsaei, N., Shao, S., Paul, S., Yeh, A.-C., Tin, S., et al. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2023.101108 · Cited by 531
Defects and anomalies in powder bed fusion metal additive manufacturing
Mostafaei, A., Zhao, C., He, Y., Reza Ghiaasiaan, S., Shi, B., Shao, S., Shamsaei, N., Wu, Z., Kouraytem, N., Sun, T., et al. (2022) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2021.100974 · Cited by 491
Metadata
- Authors
- Catchpole-Smith, S., Aboulkhair, N., Parry, L., Tuck, C., Ashcroft, I. A., & Clare, A.
- Venue
- Additive Manufacturing
- Publisher
- Elsevier BV
- Published
- 2017-05
- Volume
- 15
- Pages
- 113-122
- ISSN
- 2214-7810 (ISSN-L)
- 2214-8604
- OpenAlex
- W2588523483
- Cited by
- 217
- References
- 2
- FWCI
- 12.24
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.