The DOI matches its Crossref record; 25 of the 25 references it cites were found in a registry or an index.
Strategies for functionally graded lattice structures derived using topology optimisation for Additive Manufacturing
Open accessAbstract
A number of strategies that enable lattice structures to be derived from Topology Optimisation (TO) results suitable for Additive Manufacturing (AM) are presented. The proposed strategies are evaluated for mechanical performance and assessed for AM specific design related manufacturing considerations. From a manufacturing stand-point, support structure requirement decreases with increased extent of latticing, whereas the design-to-manufacture discrepancies and the processing efforts, both in terms of memory requirements and time, increase. Results from Finite Element (FE) analysis for the two loading scenarios considered: intended loading, and variability in loading, provide insight into the solution optimality and robustness of the design strategies. Lattice strategies that capitalised on TO results were found to be considerably (∼40–50%) superior in terms of specific stiffness when compared to the structures where this was not the case. The Graded strategy was found to be the most desirable from both the design and manufacturing perspective. The presented pros-and-cons for the various proposed design strategies aim to provide insight into their suitability in meeting the challenges faced by the AM design community.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Cellular solids structure and properties
Gibson, L. J., Ashby, M. F., et al. (1997) · Cited by 9,172
Cellular solids: Structure and properties
Wolcott, M. P. (1990) · Materials Science and Engineering: A · doi:10.1016/0921-5093(90)90295-e · Cited by 5,926
Optimal shape design as a material distribution problem
Bendsøe, M. P. (1989) · Structural Optimization · doi:10.1007/bf01650949 · Cited by 4,521
Manufacture, characterisation and application of cellular metals and metal foams
Banhart, J. (2001) · Progress in Materials Science · doi:10.1016/s0079-6425(00)00002-5 · Cited by 3,780
Bendsøe, M. P., & Sigmund, O. (2004) · Springer eBooks · doi:10.1007/978-3-662-05086-6 · Cited by 1,727
Fabrication methods of porous metals for use in orthopaedic applications
Ryan, G., Pandit, A., & Apatsidis, D. P. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2005.12.002 · Cited by 1,391
Micro-architectured materials: past, present and future
Fleck, N. A., Deshpande, V. S., & Ashby, M. F. (2010) · Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rspa.2010.0215 · Cited by 982
An efficient 3D topology optimization code written in Matlab
Liu, K., & Tovar, A. (2014) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-014-1107-x · Cited by 649
Calignano, F. (2014) · Materials & Design · doi:10.1016/j.matdes.2014.07.043 · Cited by 486
Design guidelines for laser additive manufacturing of lightweight structures in TiAl6V4
Kranz, J., Herzog, D., & Emmelmann, C. (2015) · Journal of Laser Applications · doi:10.2351/1.4885235 · Cited by 470
Cited by
Metal additive manufacturing in aerospace: A review
Blakey-Milner, B., Gradl, P., Snedden, G., Brooks, M., Pitot, J., Lopez, E., Leary, M., Berto, F., & du Plessis, A. (2021) · Materials & Design · doi:10.1016/j.matdes.2021.110008 · Cited by 2,263
SLM lattice structures: Properties, performance, applications and challenges
Maconachie, T., Leary, M., Lozanovski, B., Zhang, X., Qian, M., Faruque, O., & Brandt, M. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.108137 · Cited by 1,497
Multifunctional Mechanical Metamaterials Based on Triply Periodic Minimal Surface Lattices
Al-Ketan, O., & Abu Al-Rub, R. K. (2019) · Advanced Engineering Materials · doi:10.1002/adem.201900524 · Cited by 887
A review of topology optimization for additive manufacturing: Status and challenges
ZHU, J., ZHOU, H., WANG, C., ZHOU, L., YUAN, S., & ZHANG, W. (2021) · Chinese Journal of Aeronautics · doi:10.1016/j.cja.2020.09.020 · Cited by 874
Topology optimization of multi-scale structures: a review
Wu, J., Sigmund, O., & Groen, J. P. (2021) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-021-02881-8 · Cited by 688
Metadata
- Authors
- Panesar, A., Abdi, M., Hickman, D., & Ashcroft, I.
- Venue
- Additive Manufacturing
- Publisher
- Elsevier BV
- Published
- 2018-01
- Volume
- 19
- Pages
- 81-94
- ISSN
- 2214-7810 (ISSN-L)
- 2214-8604
- OpenAlex
- W2768632510
- Cited by
- 489
- References
- 25
- FWCI
- 35.10
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Strategies for functionally graded lattice structures derived using topology optimisation for Additive Manufacturing. https://app.cochat.ai/papers/10.1016/j.addma.2017.11.008
- The paper
- Panesar, A., Abdi, M., Hickman, D., & Ashcroft, I. (2018). Strategies for functionally graded lattice structures derived using topology optimisation for Additive Manufacturing. Additive Manufacturing. https://doi.org/10.1016/j.addma.2017.11.008
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.