The DOI matches its Crossref record.
Design guidelines for laser additive manufacturing of lightweight structures in TiAl6V4
Open accessAbstract
Today, laser additive manufacturing (LAM) is used in more and more industrial applications. Due to a new freedom in design it offers a high potential for weight saving in lightweight applications, e.g., in the aerospace industry. However, most design engineers are used to design parts for conventional manufacturing methods, such as milling and casting, and often only have limited experience in designing products for additive manufacturing. The absence of comprehensive design guidelines is therefore limiting the further usage and distribution of LAM. In this paper, experimental investigations on the influence of part position and orientation on the dimension accuracy and surface quality are presented. Typical basic shapes used in lightweight design have been identified and built in LAM. Thin walls, bars, and bore holes with varying diameters were built in different orientations to determine the process limits. From the results of the experiments, comprehensive design guidelines for lightweight structures were derived in a catalog according to DIN 2222 and are presented in detail. For each structure a favorable and an unfavorable example is shown, the underlying process restrictions are mentioned and further recommendations are given.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Additive manufacturing of metals
Herzog, D., Seyda, V., Wycisk, E., & Emmelmann, C. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.07.019 · Cited by 4,759
Self-citationWang, X., Xu, S., Zhou, S., Xu, W., Leary, M., Choong, P., Qian, M., Brandt, M., & Xie, Y. M. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.01.012 · Cited by 2,121
Benedetti, M., du Plessis, A., Ritchie, R. O., Dallago, M., Razavi, N., & Berto, F. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2021.100606 · Cited by 788
Trevisan, F., Calignano, F., Lorusso, M., Pakkanen, J., Aversa, A., Ambrosio, E., Lombardi, M., Fino, P., & Manfredi, D. (2017) · Materials · doi:10.3390/ma10010076 · Cited by 502
Panesar, A., Abdi, M., Hickman, D., & Ashcroft, I. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2017.11.008 · Cited by 489
Metadata
- Authors
- Kranz, J., Herzog, D., & Emmelmann, C.
- Venue
- Journal of Laser Applications
- Publisher
- Laser Institute of America
- Published
- 2014-12-09
- Volume
- 27
- Issue
- S1
- ISSN
- 1042-346X (ISSN-L)
- 1938-1387
- OpenAlex
- W2037633533
- Cited by
- 470
- References
- 0
- FWCI
- 26.88
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Design guidelines for laser additive manufacturing of lightweight structures in TiAl6V4. https://app.cochat.ai/papers/10.2351/1.4885235
- The paper
- Kranz, J., Herzog, D., & Emmelmann, C. (2015). Design guidelines for laser additive manufacturing of lightweight structures in TiAl6V4. Journal of Laser Applications. https://doi.org/10.2351/1.4885235
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.