The DOI matches its Crossref record; 91 of the 91 references it cites were found in a registry or an index.
Cold spray additive manufacturing and repair: Fundamentals and applications
Open accessAbstract
Abstract Cold spray is a solid-state coating deposition technology which has recently been applied as an additive manufacturing process to fabricate individual components and to repair damaged components. In comparison with fusion-based high-temperature additive manufacturing processes, cold spray additive manufacturing (CSAM) has been shown to retain the original properties of the feedstock, to produce oxide-free deposits, and to not adversely influence underlying substrate materials during manufacture. Therefore, CSAM is attracting considerable attention from both scientific and industrial communities. Although CSAM is an emerging additive manufacturing technology, a body of work has been carried out by various research groups and the technology has been applied across a range of manufacturing areas. The purpose of this paper is to systematically summarize and review the CSAM-related work to date.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Additive manufacturing of metallic components – Process, structure and properties
DebRoy, T., Wei, H. L., Zuback, J. S., Mukherjee, T., Elmer, J. W., Milewski, J. O., Beese, A. M., Wilson-Heid, A., De, A., & Zhang, W. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.10.001 · Cited by 8,805
Additive manufacturing of metals
Herzog, D., Seyda, V., Wycisk, E., & Emmelmann, C. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.07.019 · Cited by 4,759
Bonding mechanism in cold gas spraying
Assadi, H., Gärtner, F., Stoltenhoff, T., & Kreye, H. (2003) · Acta Materialia · doi:10.1016/s1359-6454(03)00274-x · Cited by 1,811
Development of a generalized parameter window for cold spray deposition
Schmidt, T., Gärtner, F., Assadi, H., & Kreye, H. (2006) · Acta Materialia · doi:10.1016/j.actamat.2005.10.005 · Cited by 1,183
Cold spraying – A materials perspective
Assadi, H., Kreye, H., Gärtner, F., & Klassen, T. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.06.034 · Cited by 946
Grujicic, M., Zhao, C. L., DeRosset, W. S., & Helfritch, D. (2004) · Materials & Design · doi:10.1016/j.matdes.2004.03.008 · Cited by 799
Particle Velocity and Deposition Efficiency in the Cold Spray Process
Gilmore, D. L., Dykhuizen, R. C., Neiser, R. A., Roemer, T. J., & Smith, M. F. (1999) · Journal of Thermal Spray Technology · doi:10.1361/105996399770350278 · Cited by 464
Solid-state additive manufacturing and repairing by cold spraying: A review
Li, W., Yang, K., Yin, S., Yang, X., Xu, Y., & Lupoi, R. (2017) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2017.09.015 · Cited by 414
Self-citationOn Parameter Selection in Cold Spraying
Assadi, H., Schmidt, T., Richter, H., Kliemann, J.-O., Binder, K., Gärtner, F., Klassen, T., & Kreye, H. (2011) · Journal of Thermal Spray Technology · doi:10.1007/s11666-011-9662-9 · Cited by 413
Bonding features and associated mechanisms in kinetic sprayed titanium coatings
Bae, G., Kumar, S., Yoon, S., Kang, K., Na, H., Kim, H., & Lee, C. (2009) · Acta Materialia · doi:10.1016/j.actamat.2009.07.061 · Cited by 325
Rokni, M. R., Nutt, S. R., Widener, C. A., Champagne, V. K., & Hrabe, R. H. (2017) · Journal of Thermal Spray Technology · doi:10.1007/s11666-017-0575-0 · Cited by 304
Standoff distance and bow shock phenomena in the Cold Spray process
Pattison, J., Celotto, S., Khan, A., & O’Neill, W. (2007) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2007.06.065 · Cited by 271
Microstructures and key properties of cold-sprayed and thermally sprayed copper coatings
Stoltenhoff, T., Borchers, C., Gärtner, F., & Kreye, H. (2006) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2005.05.011 · Cited by 267
In-situ observations of single micro-particle impact bonding
Hassani-Gangaraj, M., Veysset, D., Nelson, K. A., & Schuh, C. A. (2018) · Scripta Materialia · doi:10.1016/j.scriptamat.2017.09.042 · Cited by 255
Examination of the Critical Velocity for Deposition of Particles in Cold Spraying
Li, C.-J., Li, W.-Y., & Liao, H. (2006) · Journal of Thermal Spray Technology · doi:10.1361/105996306x108093 · Cited by 253
Self-citationMechanical properties of cold-sprayed and thermally sprayed copper coatings
Gärtner, F., Stoltenhoff, T., Voyer, J., Kreye, H., Riekehr, S., & Koçak, M. (2006) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2005.10.007 · Cited by 239
Cold gas dynamic manufacturing: A non-thermal approach to freeform fabrication
Pattison, J., Celotto, S., Morgan, R., Bray, M. E., & O’Neill, W. (2006) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2006.05.001 · Cited by 229
Residual stress and thermo-mechanical properties of cold spray metal coatings
Luzin, V., Spencer, K., & Zhang, M.-X. (2011) · Acta Materialia · doi:10.1016/j.actamat.2010.10.058 · Cited by 229
Raoelison, R. N., Xie, Y., Sapanathan, T., Planche, M. P., Kromer, R., Costil, S., & Langlade, C. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2017.07.001 · Cited by 217
Deposition behavior of thermally softened copper particles in cold spraying
Yin, S., Wang, X., Suo, X., Liao, H., Guo, Z., Li, W., & Coddet, C. (2013) · Acta Materialia · doi:10.1016/j.actamat.2013.04.041 · Cited by 202
Self-citationPotential of cold gas dynamic spray as additive manufacturing technology
Sova, A., Grigoriev, S., Okunkova, A., & Smurov, I. (2013) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-013-5166-8 · Cited by 194
The Effect of Deposition Conditions on Adhesion Strength of Ti and Ti6Al4V Cold Spray Splats
Goldbaum, D., Shockley, J. M., Chromik, R. R., Rezaeian, A., Yue, S., Legoux, J.-G., & Irissou, É. (2011) · Journal of Thermal Spray Technology · doi:10.1007/s11666-011-9720-3 · Cited by 184
Residual stress development in cold sprayed Al, Cu and Ti coatings
Suhonen, T., Varis, T., Dosta, S., Torrell, M., & Guilemany, J. M. (2013) · Acta Materialia · doi:10.1016/j.actamat.2013.06.033 · Cited by 184
The unique abilities of cold spray deposition
Champagne, V., & Helfritch, D. (2016) · International Materials Reviews · doi:10.1080/09506608.2016.1194948 · Cited by 180
Binder, K., Gottschalk, J., Kollenda, M., Gärtner, F., & Klassen, T. (2011) · Journal of Thermal Spray Technology · doi:10.1007/s11666-010-9557-1 · Cited by 175
Gas Flow, Particle Acceleration, and Heat Transfer in Cold Spray: A review
Yin, S., Meyer, M., Li, W., Liao, H., & Lupoi, R. (2016) · Journal of Thermal Spray Technology · doi:10.1007/s11666-016-0406-8 · Cited by 172
Self-citationMechanical Properties of Porous Materials
Lu, G., Lu, G. Q., & Xiao, Z. (1999) · Journal of Porous Materials · doi:10.1023/a:1009669730778 · Cited by 167
Effect of standoff distance on coating deposition characteristics in cold spraying
Li, W., Zhang, C., Guo, X., Zhang, G., Liao, H., Li, C., & Coddet, C. (2007) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2007.02.005 · Cited by 167
Self-citationCritical particle velocity under cold spray conditions
Raletz, F., Vardelle, M., & Ezo'o, G. (2006) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2006.04.061 · Cited by 164
Li, W., Yin, S., & Wang, X. (2010) · Applied Surface Science · doi:10.1016/j.apsusc.2010.01.014 · Cited by 149
Self-citationKoivuluoto, H., Coleman, A., Murray, K., Kearns, M. A., & Vuoristo, P. M. J. (2012) · Journal of Thermal Spray Technology · doi:10.1007/s11666-012-9790-x · Cited by 134
Drilling of (Al2O3)p/6061 metal matrix composites
RAMULU, M., Rao, P. N., & Kao, H. (2002) · Journal of Materials Processing Technology · doi:10.1016/s0924-0136(02)00176-0 · Cited by 133
Deformation behavior of the oxide film on the surface of cold sprayed powder particle
Yin, S., Wang, X., Li, W., Liao, H., & Jie, H. (2012) · Applied Surface Science · doi:10.1016/j.apsusc.2012.07.036 · Cited by 130
Self-citationStudy of the Influence of Particle Velocity on Adhesive Strength of Cold Spray Deposits
Huang, R., & FUKANUMA, H. (2011) · Journal of Thermal Spray Technology · doi:10.1007/s11666-011-9707-0 · Cited by 124
Formation of persistent dislocation loops by ultra-high strain-rate deformation during cold spraying
Borchers, C., Gärtner, F., Stoltenhoff, T., & Kreye, H. (2005) · Acta Materialia · doi:10.1016/j.actamat.2005.02.048 · Cited by 123
Theoretical and Experimental Particle Velocity in Cold Spray
Champagne, V. K., Helfritch, D. J., Dinavahi, S. P. G., & Leyman, P. (2010) · Journal of Thermal Spray Technology · doi:10.1007/s11666-010-9530-z · Cited by 122
Cold Spraying of Armstrong Process Titanium Powder for Additive Manufacturing
MacDonald, D., Fernández, R., Delloro, F., & Jodoin, B. (2016) · Journal of Thermal Spray Technology · doi:10.1007/s11666-016-0489-2 · Cited by 112
Residual stress induced by cold spray coating of magnesium AZ31B extrusion
Shayegan, G., Mahmoudi, H. A., Ghelichi, R., Villafuerte, J., Wang, J., Guagliano, M., & Jahed, H. (2014) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2014.03.054 · Cited by 111
Melting Can Hinder Impact-Induced Adhesion
Hassani, M., Veysset, D. G., Nelson, K. A., & Schuh, C. A. (2017) · Physical Review Letters · doi:10.1103/physrevlett.119.175701 · Cited by 110
Microstructure and mechanical anisotropy of additively manufactured cold spray copper deposits
Yin, S., Jenkins, R., Yan, X., & Lupoi, R. (2018) · Materials Science and Engineering A · doi:10.1016/j.msea.2018.07.096 · Cited by 107
Self-citationApplication of High-Pressure Cold Spray for an Internal Bore Repair of a Navy Valve Actuator
Widener, C. A., Carter, M. J., Özdemir, O. Ç., et al. (2015) · Journal of Thermal Spray Technology · doi:10.1007/s11666-015-0366-4 · Cited by 99
Effects of substrate roughness and spray-angle on deposition behavior of cold-sprayed Inconel 718
Singh, R., Rauwald, K.-H., Wessel, E., Mauer, G., Schrüfer, S., Barth, A., Wilson, S., & Vaßen, R. (2017) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2017.03.072 · Cited by 98
A theoretical model for prediction of deposition efficiency in cold spraying
Li, C., Li, W., Wang, Y., Yang, G., & FUKANUMA, H. (2005) · Thin Solid Films · doi:10.1016/j.tsf.2005.05.002 · Cited by 97
Self-citationTan, A. W., Sun, W. R., Phang, Y. P., Dai, M., Marinescu, I., Dong, Z., & Liu, E. (2017) · Journal of Thermal Spray Technology · doi:10.1007/s11666-017-0619-5 · Cited by 93
Repair of Damaged Mold Surface by Cold-Spray Method
Lee, J. C., Kang, H. J., Chu, W. S., & Ahn, S. (2007) · CIRP Annals · doi:10.1016/j.cirp.2007.05.138 · Cited by 86
Effect of substrate temperature on interfacial bonding for cold spray of Ni onto Cu
Yin, S., Suo, X., Xie, Y., Li, W., Lupoi, R., & Liao, H. (2015) · Journal of Materials Science · doi:10.1007/s10853-015-9304-6 · Cited by 84
Self-citationAdditive manufacturing of pyramidal pin fins: Height and fin density effects under forced convection
Cormier, Y., Dupuis, P., Farjam, A., Corbeil, A., & Jodoin, B. (2014) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2014.03.053 · Cited by 84
Study on Process Optimization of Cold Gas Spraying
Tabbara, H., Gu, S., McCartney, D. G., Price, T. S., & Shipway, P. H. (2011) · Journal of Thermal Spray Technology · doi:10.1007/s11666-010-9564-2 · Cited by 84
Kotoban, D., Grigoriev, S. N., Okunkova, A. A., & Sova, A. (2016) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2016.10.052 · Cited by 83
Influence of Gas Temperature on Microstructure and Properties of Cold Spray 304SS Coating
Meng, X., Zhang, J., Zhao, J., Yongli, L., & Zhang, Y. (2011) · Journal of Material Science and Technology · doi:10.1016/s1005-0302(11)60147-3 · Cited by 82
Yin, S., Suo, X., Su, J., Guo, Z., Liao, H., & Wang, X. (2013) · Journal of Thermal Spray Technology · doi:10.1007/s11666-013-0039-0 · Cited by 80
Self-citationCrack Repair in Aerospace Aluminum Alloy Panels by Cold Spray
Cavaliere, P. D., & Silvello, A. (2017) · Journal of Thermal Spray Technology · doi:10.1007/s11666-017-0534-9 · Cited by 80
Self-citationMechanical Property Mapping of Cold Sprayed Ti Splats and Coatings
Goldbaum, D., Chromik, R. R., Yue, S., Irissou, É., & Legoux, J.-G. (2010) · Journal of Thermal Spray Technology · doi:10.1007/s11666-010-9546-4 · Cited by 78
Mainstreaming cold spray – push for applications
Champagne, V. K., & Helfritch, D. J. (2014) · Surface Engineering · doi:10.1179/1743294414y.0000000277 · Cited by 77
Yin, S., Xie, Y., Suo, X., Liao, H., & Wang, X. (2014) · Materials Letters · doi:10.1016/j.matlet.2014.10.016 · Cited by 70
Self-citationSova, A., Okunkova, A. A., Grigoriev, S. N., & Smurov, I. Y. (2012) · Journal of Thermal Spray Technology · doi:10.1007/s11666-012-9846-y · Cited by 69
Net Shape Fins for Compact Heat Exchanger Produced by Cold Spray
Cormier, Y., Dupuis, P., Jodoin, B., & Corbeil, A. (2013) · Journal of Thermal Spray Technology · doi:10.1007/s11666-013-9968-x · Cited by 69
Effect of injection pressure on particle acceleration, dispersion and deposition in cold spray
Yin, S., Liu, Q., Liao, H., & Wang, X. (2014) · Computational Materials Science · doi:10.1016/j.commatsci.2014.03.055 · Cited by 68
Self-citationEffect of substrate surface condition on fatigue behavior of cold sprayed Ti6Al4V coatings
Sun, W. R., Tan, A. W., Khun, N. W., Marinescu, I., & Liu, E. (2016) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2016.11.093 · Cited by 67
Maledi, N. B., Oladijo, O. P., Botef, I., Ntsoane, T. P., Madiseng, A., & Moloisane, L. (2017) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2017.03.062 · Cited by 67
Rech, S., Trentin, A., Vezzù, S., et al. (2014) · Journal of Thermal Spray Technology · doi:10.1007/s11666-014-0141-y · Cited by 66
The Elastic Modulus of Cold Spray Coatings: Influence of Inter-splat Boundary Cracking
Sundararajan, G., Chavan, N. M., & Kumar, S. (2013) · Journal of Thermal Spray Technology · doi:10.1007/s11666-013-0034-5 · Cited by 66
Luo, X., Li, Y., Li, C., Yang, G., & Li, C. (2016) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2016.01.058 · Cited by 65
Number of Passes and Thickness Effect on Mechanical Characteristics of Cold Spray Coating
Moridi, A., Hassani-Gangaraj, S. M., Vezzù, S., & Guagliano, M. (2014) · Procedia Engineering · doi:10.1016/j.proeng.2014.06.296 · Cited by 62
Aircraft Skin Restoration and Evaluation
Yandouzi, M., Gaydos, S., Guo, D., Ghelichi, R., & Jodoin, B. (2014) · Journal of Thermal Spray Technology · doi:10.1007/s11666-014-0130-1 · Cited by 61
Venkatesh, L., Chavan, N. M., & Sundararajan, G. (2011) · Journal of Thermal Spray Technology · doi:10.1007/s11666-011-9614-4 · Cited by 60
Evaluation of the interfacial bonding between particles and substrate in angular cold spray
Chen, C., Xie, Y., Yin, S., Planche, M.-P., Deng, S., Lupoi, R., & Liao, H. (2016) · Materials Letters · doi:10.1016/j.matlet.2016.03.036 · Cited by 60
Self-citationMeng, F., Yue, S., & Song, J. J. (2015) · Scripta Materialia · doi:10.1016/j.scriptamat.2015.05.026 · Cited by 59
Jones, R., Matthews, N., Rodopoulos, C. A., Cairns, K., & Pitt, S. J. (2011) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2011.03.013 · Cited by 57
Significant influence of carrier gas temperature during the cold spray process
Yin, S., Suo, X., Liao, H., Guo, Z., & Wang, X. (2014) · Surface Engineering · doi:10.1179/1743294414y.0000000276 · Cited by 57
Self-citationEvaluation of Parameters for Assessment of Inter-Splat Bond Strength in Cold-Sprayed Coatings
Sundararajan, G., Chavan, N. M., Sivakumar, G., & Phani, P. S. (2010) · Journal of Thermal Spray Technology · doi:10.1007/s11666-010-9527-7 · Cited by 57
Feed rate effect on particulate acceleration in Cold Spray under low stagnation pressure conditions
Meyer, M., Yin, S., McDonnell, K. A., Stier, O., & Lupoi, R. (2016) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2016.07.017 · Cited by 56
Self-citationCormier, Y., Dupuis, P., Jodoin, B., & Corbeil, A. (2015) · Journal of Thermal Spray Technology · doi:10.1007/s11666-015-0267-6 · Cited by 55
Dupuis, P., Cormier, Y., Fenech, M., & Jodoin, B. (2016) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2016.03.069 · Cited by 51
Özdemir, O. Ç., Widener, C. A., Carter, M. J., & Johnson, K. (2017) · Journal of Thermal Spray Technology · doi:10.1007/s11666-017-0611-0 · Cited by 51
Nastic, A., Vijay, M. M., Tieu, A. K., Rahmati, S., & Jodoin, B. (2017) · Journal of Thermal Spray Technology · doi:10.1007/s11666-017-0602-1 · Cited by 48
Petráčková, K., Kondás, J., & Guagliano, M. (2017) · Journal of Thermal Spray Technology · doi:10.1007/s11666-017-0643-5 · Cited by 48
Jones, R., Molent, L., Barter, S. A., Matthews, N., & Tamboli, D. (2014) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2014.03.013 · Cited by 46
Raoelison, R. N., Aubignat, E., Planche, M.-P., Costil, S., Langlade, C., & Liao, H. (2016) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2016.05.068 · Cited by 43
Self-citationCormier, Y., Dupuis, P., Jodoin, B., & Ghaei, A. (2015) · Journal of Thermal Spray Technology · doi:10.1007/s11666-015-0317-0 · Cited by 39
Particle Loading Effect in Cold Spray
Taylor, K., Jodoin, B., & Karov, J. (2006) · Journal of Thermal Spray Technology · doi:10.1361/105996306x108237 · Cited by 37
Cold sprayed refractory metals for chrome reduction in gun barrel liners
Barnett, B., Trexler, M. D., & Champagne, V. K. (2015) · International Journal of Refractory Metals and Hard Materials · doi:10.1016/j.ijrmhm.2015.07.007 · Cited by 36
Yin, S. (2018) · Data Archiving and Networked Services (DANS) · doi:10.17632/vy693tgctm.1 · Cited by 35
Self-citationSova, A., Courbon, C., Valiorgue, F., Rech, J., & Bertrand, P. (2017) · Journal of Thermal Spray Technology · doi:10.1007/s11666-017-0655-1 · Cited by 34
Effects of Spark-Plasma Sintering Treatment on Cold-Sprayed Copper Coatings
Kiyohiro, I. T. O., & Ogawa, K. (2013) · Journal of Thermal Spray Technology · doi:10.1007/s11666-013-0047-0 · Cited by 33
Farjam, A., Cormier, Y., Dupuis, P., Jodoin, B., & Corbeil, A. (2015) · Journal of Thermal Spray Technology · doi:10.1007/s11666-015-0305-4 · Cited by 32
Meyer, M., Yin, S., & Lupoi, R. (2016) · Journal of Thermal Spray Technology · doi:10.1007/s11666-016-0496-3 · Cited by 30
Self-citationCold gas dynamic spraying of a novel micro-alloyed copper: Microstructure, mechanical properties
Kang, N., Coddet, P., Liao, H., & Coddet, C. (2016) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2016.06.037 · Cited by 27
Self-citationWon, J., Bae, G., Kang, K., Lee, C., Kim, S. J., Lee, K., & Lee, S. (2014) · Journal of Thermal Spray Technology · doi:10.1007/s11666-014-0088-z · Cited by 20
In situ observation of microstrain relief in cold-sprayed bulk copper during thermal annealing
Eason, P. D., Kennett, S. C., Eden, T. J., Krull, I., Kowalski, B. A., & Jones, J. L. (2012) · Scripta Materialia · doi:10.1016/j.scriptamat.2012.07.029 · Cited by 18
Matthews, N., Jones, R., & Sih, G. C. (2013) · Science China Physics Mechanics and Astronomy · doi:10.1007/s11433-013-5367-z · Cited by 14
Cited by
Cruz Sanchez, F. A., Boudaoud, H., Camargo, M., & Pearce, J. M. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.121602 · Cited by 410
Kanishka, K., & Acherjee, B. (2023) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2023.10.024 · Cited by 343
Kanishka, K., & Acherjee, B. (2023) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2023.01.034 · Cited by 300
Solid-state cold spraying of Ti and its alloys: A literature review
Li, W., Cao, C., & Yin, S. (2020) · Progress in Materials Science · doi:10.1016/j.pmatsci.2019.100633 · Cited by 257
Self-citationDeposition of FeCoNiCrMn high entropy alloy (HEA) coating via cold spraying
Yin, S., Li, W., Song, B., Yan, X., Kuang, M., Xu, Y., Wen, K., & Lupoi, R. (2019) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2018.12.015 · Cited by 255
Self-citation
Metadata
- Authors
- Yin, S., Cavaliere, P., Aldwell, B., Jenkins, R., Liao, H., Li, W., & Lupoi, R.
- Venue
- Additive Manufacturing
- Publisher
- Elsevier BV
- Published
- 2018-05
- Volume
- 21
- Pages
- 628-650
- ISSN
- 2214-7810 (ISSN-L)
- 2214-8604
- OpenAlex
- W2801918432
- Cited by
- 599
- References
- 91
- FWCI
- 41.27
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.