The DOI matches its Crossref record; 102 of the 102 references it cites were found in a registry or an index.
Solid-state cold spraying of Ti and its alloys: A literature review
Abstract
Abstract Compared to conventional high temperature processes, e.g. arc additive manufacturing, thermal spraying and laser/electron-beam cladding/additive manufacturing, coatings of Ti and its alloys with cold spraying (CS) are increasingly attracting attention from researchers and industries, because of the low temperature and high velocity characteristics of sprayed particles, which strictly restrict the oxidation of the sprayed powder and bring about prominent metallurgical benefits. However, coatings of Ti and its alloys by CS have been found limited industrial applications compared to other materials (e.g. Cu and Al), partly due to the special particle deposition behavior of Ti and its alloys and the lack of comprehensive knowledge of its control. This review therefore focuses on the deposition characteristics of Ti and its alloys during CS in an effort to shed light on them and expand their applications. The first part presents a brief introduction of CS and the basic characteristics of Ti and its alloys coatings by CS. The second part describes the effects of CS process parameters on the deposition characteristics of Ti and its alloys. The third part discusses the bonding mechanisms of Ti and its alloy particles during CS. The fourth part discusses the strengthening methods such as in-situ shot peening and laser-assisted CS. The coating properties can also be improved with post-spray treatment, such as heat treatment, laser treatment, hot rolling, hot isostatic pressing and friction stir processing. In addition, further applications are suggested, such as protective coatings, biocompatible coatings, and additive manufacturing. Finally, the summary and prospects for the deposition of Ti and its alloys are presented.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Bonding mechanism in cold gas spraying
Assadi, H., Gärtner, F., Stoltenhoff, T., & Kreye, H. (2003) · Acta Materialia · doi:10.1016/s1359-6454(03)00274-x · Cited by 1,811
Metal Additive Manufacturing: A Review of Mechanical Properties
Lewandowski, J. J., & Seifi, M. (2016) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070115-032024 · Cited by 1,722
Xu, W., Brandt, M., Sun, S., Elambasseril, J., Liu, Q., Latham, K., Xia, K., & Qian, M. (2015) · Acta Materialia · doi:10.1016/j.actamat.2014.11.028 · Cited by 1,245
Development of a generalized parameter window for cold spray deposition
Schmidt, T., Gärtner, F., Assadi, H., & Kreye, H. (2006) · Acta Materialia · doi:10.1016/j.actamat.2005.10.005 · Cited by 1,183
Cold spraying – A materials perspective
Assadi, H., Kreye, H., Gärtner, F., & Klassen, T. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.06.034 · Cited by 946
Cold spray coating: review of material systems and future perspectives
Moridi, A., Hassani-Gangaraj, S. M., Guagliano, M., & Dao, M. (2014) · Surface Engineering · doi:10.1179/1743294414y.0000000270 · Cited by 754
From Particle Acceleration to Impact and Bonding in Cold Spraying
Schmidt, T., Assadi, H., Gärtner, F., Richter, H., Stoltenhoff, T., Kreye, H., & Klassen, T. (2009) · Journal of Thermal Spray Technology · doi:10.1007/s11666-009-9357-7 · Cited by 638
Cold spray additive manufacturing and repair: Fundamentals and applications
Yin, S., Cavaliere, P., Aldwell, B., Jenkins, R., Liao, H., Li, W., & Lupoi, R. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.04.017 · Cited by 599
Self-citationAn Analysis of the Cold Spray Process and Its Coatings
Stoltenhoff, T., Kreye, H., & Richter, H. J. (2002) · Journal of Thermal Spray Technology · doi:10.1361/105996302770348682 · Cited by 583
Papyrin, A. N. (2001) · Cited by 562
Cited by
Yang, X., Meng, T., Su, Y., Chai, X., Guo, Z., Yin, S., Ma, T., & Li, W. (2024) · Materials Science and Engineering: A · doi:10.1016/j.msea.2023.146024 · Cited by 40
Self-citation
Metadata
- Authors
- Li, W., Cao, C., & Yin, S.
- Venue
- Progress in Materials Science
- Publisher
- Elsevier BV
- Published
- 2020-05
- Volume
- 110
- Pages
- 100633
- ISSN
- 0079-6425 (ISSN-L)
- OpenAlex
- W2995750336
- Cited by
- 257
- References
- 102
- FWCI
- 16.11
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Solid-state cold spraying of Ti and its alloys: A literature review. https://app.cochat.ai/papers/10.1016/j.pmatsci.2019.100633
- The paper
- Li, W., Cao, C., & Yin, S. (2020). Solid-state cold spraying of Ti and its alloys: A literature review. Progress in Materials Science. https://doi.org/10.1016/j.pmatsci.2019.100633
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
