The DOI matches its Crossref record; 40 of the 40 references it cites were found in a registry or an index.
Using machine learning to identify in-situ melt pool signatures indicative of flaw formation in a laser powder bed fusion additive manufacturing process
Abstract
Because many of the most important defects in Laser Powder Bed Fusion (L-PBF) occur at the size and timescales of the melt pool itself, the development of methodologies for monitoring the melt pool is critical. This works examines the possibility of in-situ detection of keyholing porosity and balling instabilities. Specifically, a visible-light high speed camera with a fixed field of view is used to study the morphology of L-PBF melt pools in the Inconel 718 material system. A scale-invariant description of melt pool morphology is constructed using Computer Vision techniques and unsupervised Machine Learning is used to differentiate between observed melt pools. By observing melt pools produced across process space, in-situ signatures are identified which may indicate flaws such as those observed ex-situ. This linkage of ex-situ and in-situ morphology enabled the use of supervised Machine Learning to classify melt pools observed (with the high speed camera) during fusion of non-bulk geometries such as overhangs.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
LeCun, Y., Bengio, Y., & Hinton, G. (2015) · Nature · doi:10.1038/nature14539 · Cited by 84,126
Distinctive Image Features from Scale-Invariant Keypoints
Lowe, D. G. (2004) · International Journal of Computer Vision · doi:10.1023/b:visi.0000029664.99615.94 · Cited by 55,589
Histograms of Oriented Gradients for Human Detection
Dalal, N., & Triggs, B. (2005) · 2005 IEEE Computer Society Conference on Computer Vision and Pattern Recognition (CVPR'05) · doi:10.1109/cvpr.2005.177 · Cited by 33,584
Object recognition from local scale-invariant features
Lowe, D. G. (1999) · Proceedings of the Seventh IEEE International Conference on Computer Vision · doi:10.1109/iccv.1999.790410 · Cited by 16,472
Kuhn, M., & Johnson, K. (2013) · doi:10.1007/978-1-4614-6849-3 · Cited by 6,788
Visual categorization with bags of keypoints
Csurka, G. (2004) · Cited by 4,379
Khairallah, S. A., Anderson, A. T., Rubenchik, A., & King, W. E. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.02.014 · Cited by 2,766
Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing
Everton, S. K., Hirsch, M., Stravroulakis, P., Leach, R. K., & Clare, A. T. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.01.099 · Cited by 1,469
King, W. E., Anderson, A. T., Ferencz, R. M., Hodge, N. E., Kamath, C., Khairallah, S. A., & Rubenchik, A. M. (2015) · Applied Physics Reviews · doi:10.1063/1.4937809 · Cited by 1,258
Gong, H., Rafi, K., Gu, H., Starr, T., & Stucker, B. (2014) · Additive Manufacturing · doi:10.1016/j.addma.2014.08.002 · Cited by 1,038
Cited by
Chowdhury, S., Yadaiah, N., Prakash, C., Ramakrishna, S., Dixit, S., Gupta, L. R., & Buddhi, D. (2022) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2022.07.121 · Cited by 784
Machine learning in additive manufacturing: State-of-the-art and perspectives
Wang, C., Tan, X. P., Tor, S. B., & Lim, C. S. (2020) · Additive Manufacturing · doi:10.1016/j.addma.2020.101538 · Cited by 693
A review on machine learning in 3D printing: applications, potential, and challenges
Goh, G. D., Sing, S. L., & Yeong, W. Y. (2021) · Artificial Intelligence Review · doi:10.1007/s10462-020-09876-9 · Cited by 652
Machine Learning for industrial applications: A comprehensive literature review
Bertolini, M., Mezzogori, D., Neroni, M., & Zammori, F. (2021) · Expert Systems with Applications · doi:10.1016/j.eswa.2021.114820 · Cited by 553
Scientific, technological and economic issues in metal printing and their solutions
DebRoy, T., Mukherjee, T., Milewski, J. O., Elmer, J. W., Ribic, B., Blecher, J. J., & Zhang, W. (2019) · Nature Materials · doi:10.1038/s41563-019-0408-2 · Cited by 543
Defects and anomalies in powder bed fusion metal additive manufacturing
Mostafaei, A., Zhao, C., He, Y., Reza Ghiaasiaan, S., Shi, B., Shao, S., Shamsaei, N., Wu, Z., Kouraytem, N., Sun, T., et al. (2022) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2021.100974 · Cited by 491
Wu, Y., Fang, J., Wu, C., Li, C., Sun, G., & Li, Q. (2023) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2023.108102 · Cited by 440
Research and application of machine learning for additive manufacturing
Qin, J., Hu, F., Liu, Y., Witherell, P., Wang, C. C. L., Rosen, D. W., Simpson, T. W., Lu, Y., & Tang, Q. (2022) · Additive Manufacturing · doi:10.1016/j.addma.2022.102691 · Cited by 391
“Apart from CNN-based models, SVM [101,102], Bayesian classification [103], deep belief networks (DBN) [104], deep neural networks (DNN) [105], k -means singular value decomposition (K-SVD) [106] have also been employed to analyse image data for quality inspection in AM systems.”
Machine Learning and Deep Learning in smart manufacturing: The Smart Grid paradigm
Kotsiopoulos, T., Sarigiannidis, P., Ioannidis, D., & Tzovaras, D. (2021) · Computer Science Review · doi:10.1016/j.cosrev.2020.100341 · Cited by 341
Progress and Opportunities for Machine Learning in Materials and Processes of Additive Manufacturing
Ng, W. L., Goh, G. L., Goh, G. D., Ten, J. S. J., & Yeong, W. Y. (2024) · Advanced Materials · doi:10.1002/adma.202310006 · Cited by 339
Kumar, S., Gopi, T., Harikeerthana, N., Gupta, M. K., Gaur, V., Krolczyk, G. M., & Wu, C. (2023) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-022-02029-5 · Cited by 328
Machine learning for metal additive manufacturing: Towards a physics-informed data-driven paradigm
Guo, S., Agarwal, M., Cooper, C., Tian, Q., Gao, R. X., Guo, W., & Guo, Y. B. (2022) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2021.11.003 · Cited by 309
Jiang, J., & Ma, Y. (2020) · Micromachines · doi:10.3390/mi11070633 · Cited by 279
Additive manufacturing of polymeric composites from material processing to structural design
Yuan, S., Li, S., Zhu, J., & Tang, Y. (2021) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2021.108903 · Cited by 267
Machine learning in predicting mechanical behavior of additively manufactured parts
Nasiri, S., & Khosravani, M. R. (2021) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2021.07.004 · Cited by 202
Ukwaththa, J., Herath, S., & Meddage, D. P. P. (2024) · Materials Today Communications · doi:10.1016/j.mtcomm.2024.110294 · Cited by 118
Hyperspectral imaging for prediction of surface roughness in laser powder bed fusion
Gerdes, N., Hoff, C., Hermsdorf, J., Kaierle, S., & Overmeyer, L. (2021) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-021-07274-1 · Cited by 36
Hernández, F., & Fragoso, A. (2022) · Applied Sciences · doi:10.3390/app12073539 · Cited by 19
“More recently, the application of artificial intelligence [38] and decision-making metrics [39] in the mould-manufacturing process has permitted addressing sustainability aspects that could, in the future, challenge traditional mass production technologies [40].”
Background
Metadata
- Authors
- Scime, L., & Beuth, J.
- Venue
- Additive Manufacturing
- Publisher
- Elsevier BV
- Published
- 2019-01
- Volume
- 25
- Pages
- 151-165
- ISSN
- 2214-7810 (ISSN-L)
- 2214-8604
- OpenAlex
- W2901057844
- Cited by
- 369
- References
- 40
- FWCI
- 18.07
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.