The DOI matches its Crossref record; 40 of the 40 references it cites were found in a registry or an index.
Using machine learning to identify in-situ melt pool signatures indicative of flaw formation in a laser powder bed fusion additive manufacturing process
Abstract
Because many of the most important defects in Laser Powder Bed Fusion (L-PBF) occur at the size and timescales of the melt pool itself, the development of methodologies for monitoring the melt pool is critical. This works examines the possibility of in-situ detection of keyholing porosity and balling instabilities. Specifically, a visible-light high speed camera with a fixed field of view is used to study the morphology of L-PBF melt pools in the Inconel 718 material system. A scale-invariant description of melt pool morphology is constructed using Computer Vision techniques and unsupervised Machine Learning is used to differentiate between observed melt pools. By observing melt pools produced across process space, in-situ signatures are identified which may indicate flaws such as those observed ex-situ. This linkage of ex-situ and in-situ morphology enabled the use of supervised Machine Learning to classify melt pools observed (with the high speed camera) during fusion of non-bulk geometries such as overhangs.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
LeCun, Y., Bengio, Y., & Hinton, G. (2015) · Nature · doi:10.1038/nature14539 · Cited by 84,126
Distinctive Image Features from Scale-Invariant Keypoints
Lowe, D. G. (2004) · International Journal of Computer Vision · doi:10.1023/b:visi.0000029664.99615.94 · Cited by 55,589
Histograms of Oriented Gradients for Human Detection
Dalal, N., & Triggs, B. (2005) · 2005 IEEE Computer Society Conference on Computer Vision and Pattern Recognition (CVPR'05) · doi:10.1109/cvpr.2005.177 · Cited by 33,584
Object recognition from local scale-invariant features
Lowe, D. G. (1999) · Proceedings of the Seventh IEEE International Conference on Computer Vision · doi:10.1109/iccv.1999.790410 · Cited by 16,472
Kuhn, M., & Johnson, K. (2013) · doi:10.1007/978-1-4614-6849-3 · Cited by 6,788
Visual categorization with bags of keypoints
Csurka, G. (2004) · Cited by 4,379
Khairallah, S. A., Anderson, A. T., Rubenchik, A., & King, W. E. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.02.014 · Cited by 2,766
Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing
Everton, S. K., Hirsch, M., Stravroulakis, P., Leach, R. K., & Clare, A. T. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.01.099 · Cited by 1,469
King, W. E., Anderson, A. T., Ferencz, R. M., Hodge, N. E., Kamath, C., Khairallah, S. A., & Rubenchik, A. M. (2015) · Applied Physics Reviews · doi:10.1063/1.4937809 · Cited by 1,258
Gong, H., Rafi, K., Gu, H., Starr, T., & Stucker, B. (2014) · Additive Manufacturing · doi:10.1016/j.addma.2014.08.002 · Cited by 1,038
Process defects and in situ monitoring methods in metal powder bed fusion: a review
Grasso, M., & Colosimo, B. M. (2017) · Measurement Science and Technology · doi:10.1088/1361-6501/aa5c4f · Cited by 833
Single track formation in selective laser melting of metal powders
Yadroitsev, I., Gusarov, A., Yadroitsava, I., & Smurov, I. (2010) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2010.05.010 · Cited by 827
Zhao, C., Fezzaa, K., Cunningham, R. W., Wen, H., De Carlo, F., Chen, L., Rollett, A. D., & Sun, T. (2017) · Scientific Reports · doi:10.1038/s41598-017-03761-2 · Cited by 758
Support vector machines: hype or hallelujah?
Bennett, K. P., & Campbell, C. (2000) · ACM SIGKDD Explorations Newsletter · doi:10.1145/380995.380999 · Cited by 687
Goetsch, D. L. (2002) · Cited by 674
Which Is the Best Multiclass SVM Method? An Empirical Study
Duan, K.-B., & Keerthi, S. S. (2005) · Lecture Notes in Computer Science · doi:10.1007/11494683_28 · Cited by 578
In-process sensing in selective laser melting (SLM) additive manufacturing
Spears, T. G., & Gold, S. A. (2016) · Integrating Materials and Manufacturing Innovation · doi:10.1186/s40192-016-0045-4 · Cited by 495
Scime, L., & Beuth, J. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2017.11.009 · Cited by 489
Self-citationClijsters, S., Craeghs, T., Buls, S., Kempen, K., & Kruth, J.-P. (2014) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-014-6214-8 · Cited by 437
Scipioni Bertoli, U., Guss, G., Wu, S., Matthews, M. J., & Schoenung, J. M. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.09.044 · Cited by 412
Criales, L. E., Arısoy, Y. M., Lane, B., Moylan, S., Donmez, A., & Özel, T. (2017) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2017.03.004 · Cited by 309
Khanzadeh, M., Chowdhury, S., Tschopp, M. A., Doude, H. R., Marufuzzaman, M., & Bian, L. (2019) · IISE Transactions · doi:10.1080/24725854.2017.1417656 · Cited by 278
Grasso, M., Demir, A. G., Previtali, B., & Colosimo, B. M. (2018) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2017.07.001 · Cited by 231
Grasso, M., Laguzza, V., Semeraro, Q., & Colosimo, B. M. (2017) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4034715 · Cited by 224
On the use of spatter signature for in-situ monitoring of Laser Powder Bed Fusion
Repossini, G., Laguzza, V., Grasso, M., & Colosimo, B. M. (2017) · Additive Manufacturing · doi:10.1016/j.addma.2017.05.004 · Cited by 206
Thermal conductivity of metal powders for powder bed additive manufacturing
Wei, L. C., Ehrlich, L. E., Powell-Palm, M. J., Montgomery, C., Beuth, J., & Malen, J. A. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.02.002 · Cited by 200
Self-citationYe, D., Hsi Fuh, J. Y., Zhang, Y., Hong, G. S., & Zhu, K. (2018) · ISA Transactions · doi:10.1016/j.isatra.2018.07.021 · Cited by 165
Metal Additive Manufacturing: Cost Competitive Beyond Low Volumes
Laureijs, R. E., Roca, J. B., Narra, S. P., Montgomery, C., Beuth, J., & Fuchs, E. R. H. (2016) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4035420 · Cited by 159
Self-citationTemperature Profile and Imaging Analysis of Laser Additive Manufacturing of Stainless Steel
Islam, M. D. S., Purtonen, T., Piili, H., Salminen, A., & Nyrhilä, O. (2013) · Physics Procedia · doi:10.1016/j.phpro.2013.03.156 · Cited by 156
Computer Vision and Machine Learning for Autonomous Characterization of AM Powder Feedstocks
DeCost, B., Jain, H., Rollett, A. D., & Holm, E. A. (2016) · JOM · doi:10.1007/s11837-016-2226-1 · Cited by 143
Theoretical approach to the humping phenomenon in welding processes
Gratzke, U., Kapadia, P., Dowden, J. M., Kroos, J., & Simon, G. (1992) · Journal of Physics D Applied Physics · doi:10.1088/0022-3727/25/11/012 · Cited by 137
Electron Beam Freeform Fabrication (EBF3) for Cost Effective Near-Net Shape Manufacturing
Taminger, K. M. B., & Hafley, R. A. (2006) · NASA Technical Reports Server (NASA) · Cited by 88
Electron Beam Freeform Fabrication for Cost Effective Near-Net Shape Manufacturing
Taminger, K. M. B., & Hafley, R. A. (2006) · NASA STI Repository (National Aeronautics and Space Administration) · Cited by 81
Process Mapping for Qualification Across Multiple Direct Metal Additive Manufacturing Processes
Beuth, J., Fox, J. C., Gockel, J., et al. (2013) · doi:10.26153/tsw/15590 · Cited by 70
Self-citationDetection of elevated regions in surface images from laser beam melting processes
Jacobsmühlen, J. Z., Kleszczynski, S., Witt, G., & Merhof, D. (2015) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2015.7392275 · Cited by 55
Kerschbaumer, M., & Ernst, G. (2004) · International Congress on Applications of Lasers & Electro-Optics (ICALEO) · doi:10.2351/1.5060234 · Cited by 41
Elevated Region Area Measurement for Quantitative Analysis of Laser Beam Melting Process Stability
Jacobsmühlen, J. Z., Witt, G., Kleszczynski, S., & Merhof, D. (2015) · Cited by 40
Anam, A., Dilip, J. J. S., Pal, D., & Stucker, B. E. (2014) · doi:10.26153/tsw/15692 · Cited by 27
Nassar, A. R., Reutzel, E. W., Brown, S. W., Morgan, J. P., Morgan, J. P., Natale, D. J., Tutwiler, R. L., Feck, D. P., & Banks, J. C. (2016) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.2217855 · Cited by 26
Homography estimation from planar contours in image sequence
Zhai, M., Fu, S., & Jing, Z. (2010) · Optical Engineering · doi:10.1117/1.3364071 · Cited by 15
Cited by
Chowdhury, S., Yadaiah, N., Prakash, C., Ramakrishna, S., Dixit, S., Gupta, L. R., & Buddhi, D. (2022) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2022.07.121 · Cited by 784
Machine learning in additive manufacturing: State-of-the-art and perspectives
Wang, C., Tan, X. P., Tor, S. B., & Lim, C. S. (2020) · Additive Manufacturing · doi:10.1016/j.addma.2020.101538 · Cited by 693
A review on machine learning in 3D printing: applications, potential, and challenges
Goh, G. D., Sing, S. L., & Yeong, W. Y. (2021) · Artificial Intelligence Review · doi:10.1007/s10462-020-09876-9 · Cited by 652
Machine Learning for industrial applications: A comprehensive literature review
Bertolini, M., Mezzogori, D., Neroni, M., & Zammori, F. (2021) · Expert Systems with Applications · doi:10.1016/j.eswa.2021.114820 · Cited by 553
Scientific, technological and economic issues in metal printing and their solutions
DebRoy, T., Mukherjee, T., Milewski, J. O., Elmer, J. W., Ribic, B., Blecher, J. J., & Zhang, W. (2019) · Nature Materials · doi:10.1038/s41563-019-0408-2 · Cited by 543
Metadata
- Authors
- Scime, L., & Beuth, J.
- Venue
- Additive Manufacturing
- Publisher
- Elsevier BV
- Published
- 2019-01
- Volume
- 25
- Pages
- 151-165
- ISSN
- 2214-7810 (ISSN-L)
- 2214-8604
- OpenAlex
- W2901057844
- Cited by
- 369
- References
- 40
- FWCI
- 18.07
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.