The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Rapid multi-material 3D printing with projection micro-stereolithography using dynamic fluidic control
Abstract
Abstract Mask projection stereolithography is a digital light processing-based additive manufacturing technique that has various advantages, such as high-resolution, scanning-free parallel process, wide material sets available, and support-structure-free three-dimensional (3D) printing. However, multi-material 3D printing with mask projection stereolithography has been challenging due to difficulties of exchanging a liquid-state material in a vat. In this work, we report a rapid multi-material projection micro-stereolithography using dynamic fluidic control of multiple liquid photopolymers within an integrated fluidic cell. Highly complex multi-material 3D micro-structures are rapidly fabricated through an active material exchange process. Material flow rate in the fluidic cell, material exchange efficiency, and the effects of energy dosage on curing depth are studied for various photopolymers. In addition, the degree of cross-contamination between different materials in a 3D printed multi-material structure is evaluated to assess the quality of multi-material printing. The pressure-tight and leak-free fluidic cell enables active and fast switch between liquid photopolymers, even including micro-/nano-particle suspensions, which could potentially lead to facile 3D printing of multi-material metallic/ceramic structures or heterogeneous biomaterials. In addition, a multi-responsive hydrogel micro-structure is printed using a thermo-responsive hydrogel and an electroactive hydrogel, showing various modes of swelling actuation in response to multiple external stimuli. This new ability to rapidly and heterogeneously integrate multiple functional materials in three-dimension at micro-scale has potential to accelerate advances in many emerging areas including 3D metamaterials, tissue engineering, and soft robotics.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Metal Additive Manufacturing: A Review
Frazier, W. E. (2014) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-014-0958-z · Cited by 5,984
Three-dimensional microfabrication with two-photon-absorbed photopolymerization
Maruo, S., Nakamura, O., & Kawata, S. (1997) · Optics Letters · doi:10.1364/ol.22.000132 · Cited by 1,952
Multimaterial 4D Printing with Tailorable Shape Memory Polymers
Ge, Q., Sakhaei, A. H., Lee, H., Dunn, C. K., Fang, N. X., & Dunn, M. L. (2016) · Scientific Reports · doi:10.1038/srep31110 · Cited by 1,160
Self-citationDirect 4D Printing Via Active Composite Materials
Ding, Z., Yuan, C., Peng, X., Wang, T., Qi, H. J., & Dunn, M. L. (2017) · Science Advances · doi:10.1126/sciadv.1602890 · Cited by 692
Cited by
Projection micro stereolithography based 3D printing and its applications
Ge, Q., Li, Z., Wang, Z., Kowsari, K., Zhang, W., He, X., Zhou, J., & Fang, N. X. (2020) · International Journal of Extreme Manufacturing · doi:10.1088/2631-7990/ab8d9a · Cited by 444
Self-citationThe recent development of vat photopolymerization: A review
Zhang, F., Zhu, L., Li, Z., Wang, S., Shi, J., Tang, W., Li, N., & Yang, J. (2021) · Additive Manufacturing · doi:10.1016/j.addma.2021.102423 · Cited by 375
Zhu, Z., Ng, D. W. H., Park, H. S., & McAlpine, M. C. (2020) · Nature Reviews Materials · doi:10.1038/s41578-020-00235-2 · Cited by 348
3D‐Printed Anisotropic Polymer Materials for Functional Applications
Chen, J., Liu, X., Tian, Y., Zhu, W., Yan, C., Shi, Y., Kong, L. B., Qi, H. J., & Zhou, K. (2022) · Advanced Materials · doi:10.1002/adma.202102877 · Cited by 281
Recent advances in multi-material additive manufacturing: methods and applications
Han, D., & Lee, H. (2020) · Current Opinion in Chemical Engineering · doi:10.1016/j.coche.2020.03.004 · Cited by 266
Self-citation
Metadata
- Authors
- Han, D., Yang, C., Fang, N. X., & Lee, H.
- Venue
- Additive Manufacturing
- Publisher
- Elsevier BV
- Published
- 2019-05
- Volume
- 27
- Pages
- 606-615
- ISSN
- 2214-7810 (ISSN-L)
- 2214-8604
- OpenAlex
- W2930436810
- Cited by
- 216
- References
- 4
- FWCI
- 11.10
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Rapid multi-material 3D printing with projection micro-stereolithography using dynamic fluidic control. https://app.cochat.ai/papers/10.1016/j.addma.2019.03.031
- The paper
- Han, D., Yang, C., Fang, N. X., & Lee, H. (2019). Rapid multi-material 3D printing with projection micro-stereolithography using dynamic fluidic control. Additive Manufacturing. https://doi.org/10.1016/j.addma.2019.03.031
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.