The DOI matches its Crossref record; 10 of the 10 references it cites were found in a registry or an index.
Fused filament fabrication, debinding and sintering as a low cost additive manufacturing method of 316L stainless steel
Abstract
Abstract By using filaments comprising metal or ceramic powders and polymer binders, solid metal and ceramic parts can be created by combining low-cost fused filament fabrication (FFF) with debinding and sintering. In this work, we explored a fabrication route using a FFF filament filled with 316 L steel powder at 55 vol.-%. We investigated the printing, debinding and sintering parameters and optimized them with respect to the mechanical properties of the final part. Special focus was placed on debinding and sintering in order to obtain components of low residual porosity. Solvent debinding of the printed green bodies created an internal network of interconnected pores and was followed by thermal debinding. Thermal debinding allowed for complete removal of the remaining binder and produced mechanically stable brown parts. Sintering at 1360 °C provided densification of the parts and generated nearly isotropic linear shrinkage of about 20%. Using optimized parameters, it was possible to fabricate 316 L steel components with a density greater than 95% via the material extrusion additive manufacturing, debinding and sintering route, with achievable deflections in a 3-point bending test similar to rolled sheet material, albeit at lower strength.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Gonzalez-Gutierrez, J., Cano, S., Schuschnigg, S., Kukla, C., Sapkota, J., & Holzer, C. (2018) · Materials · doi:10.3390/ma11050840 · Cited by 713
Self-citationStructural quality of parts processed by fused deposition
Agarwala, M. K., Jamalabad, V. R., Langrana, N. A., Safari, A., Whalen, P. J., & Danforth, S. C. (1996) · Rapid Prototyping Journal · doi:10.1108/13552549610732034 · Cited by 406
Spoerk, M., Gonzalez-Gutierrez, J., Sapkota, J., Schuschnigg, S., & Holzer, C. (2018) · Plastics, Rubber and Composites · doi:10.1080/14658011.2017.1399531 · Cited by 282
Self-citationFabrication and properties of extrusion-based 3D-printed hardmetal and cermet components
Lengauer, W., Duretek, I., Fürst, M., Schwarz, V., Gonzalez-Gutierrez, J., Schuschnigg, S., Kukla, C., Kitzmantel, M., Neubauer, E., Lieberwirth, C., et al. (2019) · International Journal of Refractory Metals and Hard Materials · doi:10.1016/j.ijrmhm.2019.04.011 · Cited by 182
Self-citationGonzález-Gutiérrez, J., Arbeiter, F. J., Schlauf, T., Kukla, C., & Holzer, C. (2019) · Materials Letters · doi:10.1016/j.matlet.2019.04.024 · Cited by 162
Self-citationSolid freeform fabrication of metal components using fused deposition of metals
Wu, G., Langrana, N. A., Sadanji, R., & Danforth, S. C. (2002) · Materials & Design (1980-2015) · doi:10.1016/s0261-3069(01)00079-6 · Cited by 144
Durão, L. F. C. S., Barkoczy, R., Zancul, E. D. S., Ho, L. L., & Bonnard, R. (2019) · Progress in Additive Manufacturing · doi:10.1007/s40964-019-00075-9 · Cited by 98
Overview of powder injection molding
Vervoort, P., Vetter, R., & Duszczyk, J. (1996) · Advanced Performance Materials · doi:10.1007/bf00136742 · Cited by 52
Thermal debinding modeling of mass transport and deformation in powder-injection molding compact
Shengjie, Y., Lam, Y. C., Yu, S. C. M., & Tam, K. C. (2002) · Metallurgical and Materials Transactions B · doi:10.1007/s11663-002-0058-6 · Cited by 49
Liu, D., & Tseng, W. J. (1998) · Ceramics International · doi:10.1016/s0272-8842(97)00039-4 · Cited by 43
Cited by
Extrusion-based additive manufacturing technologies: State of the art and future perspectives
Altıparmak, S. C., Yardley, V. A., Shi, Z., & Lin, J. (2022) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2022.09.032 · Cited by 320
Jayawardane, H., Davies, I. J., Gamage, J. R., John, M., & Biswas, W. K. (2022) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-022-09748-2 · Cited by 32
“[17] have stated that the density, dimensional measurement for shrinkage, and flexural strength of the 316L stainless steel specimens made by BMD is similar to rolled sheet metal bulk material.”
BackgroundInfluential
Metadata
- Authors
- Thompson, Y., Gonzalez-Gutierrez, J., Kukla, C., & Felfer, P.
- Venue
- Additive Manufacturing
- Publisher
- Elsevier BV
- Published
- 2019-12
- Volume
- 30
- Pages
- 100861
- ISSN
- 2214-7810 (ISSN-L)
- 2214-8604
- OpenAlex
- W2972392622
- Cited by
- 277
- References
- 10
- FWCI
- 13.82
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Fused filament fabrication, debinding and sintering as a low cost additive manufacturing method of 316L stainless steel. https://app.cochat.ai/papers/10.1016/j.addma.2019.100861
- The paper
- Thompson, Y., Gonzalez-Gutierrez, J., Kukla, C., & Felfer, P. (2019). Fused filament fabrication, debinding and sintering as a low cost additive manufacturing method of 316L stainless steel. Additive Manufacturing. https://doi.org/10.1016/j.addma.2019.100861
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.