CoChat
Cited by 223

The DOI matches its Crossref record.

Additive manufacturing of high-strength crack-free Ni-based Hastelloy X superalloy

Open access
Han, Quanquan, Gu, Yuchen, Setchi, Rossitza, Lacan, Franck, Johnston, Richard, Evans, Sam L., Yang, Shoufeng · 2019 · Additive Manufacturing

Abstract

Abstract Laser powder bed fusion (LPBF) is a proven additive manufacturing (AM) technology for producing metallic components with complex shapes using layer-by-layer manufacture principle. However, the fabrication of crack-free high-performance Ni-based superalloys such as Hastelloy X (HX) using LPBF technology remains a challenge because of these materials’ susceptibility to hot cracking. This paper addresses the above problem by proposing a novel method of introducing 1 wt.% titanium carbide (TiC) nanoparticles. The findings reveal that the addition of TiC nanoparticles results in the elimination of microcracks in the LPBF-fabricated enhanced HX samples; i.e. the 0.65% microcracks that were formed in the as-fabricated original HX were eliminated in the as-fabricated enhanced HX, despite the 0.14% residual pores formed. It also contributes to a 21.8% increase in low-angle grain boundaries (LAGBs) and a 98 MPa increase in yield strength. The study revealed that segregated carbides were unable to trigger hot cracking without sufficient thermal residual stresses; the significantly increased subgrains and low-angle grain boundaries played a key role in the hot cracking elimination. These findings offer a new perspective on the elimination of hot cracking of nickel-based superalloys and other industrially relevant crack-susceptible alloys. The findings also have significant implications for the design of new alloys, particularly for high-temperature industrial applications.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1016/j.addma.2019.100919

Cites

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cited by

See all 223

Metadata

Authors
Han, Q., Gu, Y., Setchi, R., Lacan, F., Johnston, R., Evans, S. L., & Yang, S.
Venue
Additive Manufacturing
Publisher
Elsevier BV
Published
2019-12
Volume
30
Pages
100919
ISSN
  • 2214-7810 (ISSN-L)
  • 2214-8604
OpenAlex
W2980972540
Cited by
223
References
0
FWCI
13.40
Type
journal article
Language
en
Open access
bronze

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Additive manufacturing of high-strength crack-free Ni-based Hastelloy X superalloy. https://app.cochat.ai/papers/10.1016/j.addma.2019.100919
The paper
Han, Q., Gu, Y., Setchi, R., Lacan, F., Johnston, R., Evans, S. L., & Yang, S. (2019). Additive manufacturing of high-strength crack-free Ni-based Hastelloy X superalloy. Additive Manufacturing. https://doi.org/10.1016/j.addma.2019.100919

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.