The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
A novel method to 3D-print fine-grained AlSi10Mg alloy with isotropic properties via inoculation with LaB6 nanoparticles
Abstract
Abstract Metal additive manufacturing offers a tool to bring formerly unmanufacturable, geometrically complex, engineered structures into existence. However, considerable challenges remain in controlling the unique microstructures, defects and properties that are created through this process. For the first time this work demonstrates how LaB6 nanoparticles can be used to control such features in Al alloys produced by Selective Laser Melting (SLM). A novel and efficient mechanical agitation process is used to inoculate AlSi10Mg powder with LaB6 nanoparticles which resulted in a homogenous, crack-free, equiaxed, very fine-grained as built microstructures. The substantial grain refinement is attributed to the good crystallographic atomic matching across the Al/LaB6 interfaces which facilitated Al nucleation on the LaB6 nanoparticles. The LaB6-inoculated AlSi10Mg exhibited near-isotropic mechanical properties with an improved plasticity compared with un modified AlSi10Mg.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Additive manufacturing of metallic components – Process, structure and properties
DebRoy, T., Wei, H. L., Zuback, J. S., Mukherjee, T., Elmer, J. W., Milewski, J. O., Beese, A. M., Wilson-Heid, A., De, A., & Zhang, W. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.10.001 · Cited by 8,805
Phase Transformations in Metals and Alloys
Porter, D. A., & Easterling, K. E. (1992) · doi:10.1007/978-1-4899-3051-4 · Cited by 4,904
Cited by
Review of high-strength aluminium alloys for additive manufacturing by laser powder bed fusion
Rometsch, P. A., Zhu, Y., Wu, X., & Huang, A. (2022) · Materials & Design · doi:10.1016/j.matdes.2022.110779 · Cited by 330
Zhao, L., Song, L., Santos Macías, J. G., Zhu, Y., Huang, M., Simar, A., & Li, Z. (2022) · Additive Manufacturing · doi:10.1016/j.addma.2022.102914 · Cited by 292
Guo, C., Li, G., Li, S., Hu, X., Lu, H., Li, X., Xu, Z., Chen, Y., Li, Q., Lu, J., et al. (2023) · Nano Materials Science · doi:10.1016/j.nanoms.2022.08.001 · Cited by 273
Grain Refinement of Alloys in Fusion-Based Additive Manufacturing Processes
Zhang, D., Prasad, A., Bermingham, M. J., Todaro, C. J., Benoit, M. J., Patel, M. N., Qiu, D., StJohn, D. H., Qian, M., & Easton, M. A. (2020) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-020-05880-4 · Cited by 270
Self-citationCoated metal powders for laser powder bed fusion (L-PBF) processing: A review
Bidulsky, R., Gobber, F. S., Bidulska, J., Ceroni, M., Kvackaj, T., & Grande, M. A. (2021) · Metals · doi:10.3390/met11111831 · Cited by 68
Metadata
- Authors
- Tan, Q., Zhang, J., Mo, N., Fan, Z., Yin, Y., Bermingham, M., Liu, Y., Huang, H., & Zhang, M.-X.
- Venue
- Additive Manufacturing
- Publisher
- Elsevier BV
- Published
- 2020-03
- Volume
- 32
- Pages
- 101034
- ISSN
- 2214-7810 (ISSN-L)
- 2214-8604
- OpenAlex
- W2997009645
- Cited by
- 189
- References
- 2
- FWCI
- 12.73
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A novel method to 3D-print fine-grained AlSi10Mg alloy with isotropic properties via inoculation with LaB6 nanoparticles. https://app.cochat.ai/papers/10.1016/j.addma.2019.101034
- The paper
- Tan, Q., Zhang, J., Mo, N., Fan, Z., Yin, Y., Bermingham, M., Liu, Y., Huang, H., & Zhang, M.-X. (2020). A novel method to 3D-print fine-grained AlSi10Mg alloy with isotropic properties via inoculation with LaB6 nanoparticles. Additive Manufacturing. https://doi.org/10.1016/j.addma.2019.101034
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.