The DOI matches its Crossref record.
Prediction of interlayer strength in material extrusion additive manufacturing
Abstract
Abstract The interlayer strengths of parts produced through material extrusion (also referred to as fused filament fabrication or FFF) suffer due to poor interlayer contact and insufficient diffusion. A model for predicting interlayer contact, based on pressure-driven flow, is combined with a model for polymer chain diffusion to predict the interlayer strength (aka, bond strength) of material extrusion parts. Interlayer contact is predicted based on in-line pressure measurements while diffusion is predicted based on in-line temperature and viscosity measurements, demonstrating that a combination of the appropriate in-line sensors and models can be used for real-time monitoring and process control. The interlayer strength model is successfully validated against strength measurements of parts made with high impact polystyrene, indicating that the strength of all parts suffers due to incomplete interlayer contact while only some parts suffered from incomplete diffusive healing. The melt pressure and in-line rheological measurements have proven extremely valuable for understanding the material extrusion process, optimizing quality, and monitoring consistency. Practical insights from the model are provided about how to select appropriate materials and processing conditions, and it concludes with a demonstration of using the in-line sensors and real-time modeling for defect detection.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Fused deposition modeling: process, materials, parameters, properties, and applications
Rajan, K., Samykano, M., Kadirgama, K., Harun, W. S. W., & Rahman, M. M. (2022) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-022-08860-7 · Cited by 426
Fused filament fabrication of polymer materials: A review of interlayer bond
Gao, X., Qi, S., Kuang, X., Su, Y., Li, J., & Wang, D. (2021) · Additive Manufacturing · doi:10.1016/j.addma.2020.101658 · Cited by 418
Das, A., Gilmer, E. L., Biria, S., & Bortner, M. J. (2021) · ACS Applied Polymer Materials · doi:10.1021/acsapm.0c01228 · Cited by 305
Metadata
- Authors
- Coogan, T. J., & Kazmer, D. O.
- Venue
- Additive Manufacturing
- Publisher
- Elsevier BV
- Published
- 2020-10
- Volume
- 35
- Pages
- 101368
- ISSN
- 2214-7810 (ISSN-L)
- 2214-8604
- OpenAlex
- W3034146901
- Cited by
- 158
- References
- 0
- FWCI
- 7.80
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Prediction of interlayer strength in material extrusion additive manufacturing. https://app.cochat.ai/papers/10.1016/j.addma.2020.101368
- The paper
- Coogan, T. J., & Kazmer, D. O. (2020). Prediction of interlayer strength in material extrusion additive manufacturing. Additive Manufacturing. https://doi.org/10.1016/j.addma.2020.101368
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.