The DOI matches its Crossref record; 125 of the 125 references it cites were found in a registry or an index.
Importance of Polymer Rheology on Material Extrusion Additive Manufacturing: Correlating Process Physics to Print Properties
Abstract
Recent advances in the field of additive manufacturing (AM) or 3D printing, have garnered serious interest for its potential to substitute time-consuming and costly subtractive and formative manufacturing techniques. Material extrusion (MatEx), employing filament and pellet-based feedstocks, is an AM technique for fabricating three-dimensional objects dictated by a computer-aided design (CAD) file in a layer-by-layer manner. Being inherently a “melt-and-form” technique, the physics of MatEx is strongly dependent on the melt flow behavior of the polymers and hence on their rheology. The focus of this review article is to analyze the current progress in rheological characterizations of filament and pellet-based polymeric feedstocks for application in MatEx. The importance of shear and temperature-dependent viscosities in relation to consistent extrusion through the print nozzle and in the standoff region between nozzle and bed will be highlighted. The importance of shear and/or extensional viscosities and extent of die swell (upon exit from the nozzle) experienced by the polymers under processing parameters relevant to MatEx will be investigated. Postextrusion from the nozzle, the rheological characteristics of the viscous polymer melt as it cools once deposited on the print bed governs the degree of interlayer welding, that impacts the mechanical performance of the printed parts. Controlling and monitoring rheological properties such as zero-shear viscosities and shear moduli of the melt is of significant importance in this region in order to ensure proper mechanical robustness and shape integrity of the deposited layers. Both experimental and theoretical approaches based on polymer chain reptation mechanisms will be reviewed in detail and suggestions to address the existing limitations associated with the process will be provided. Fundamental understanding of the correlation between the classical theories and current understanding based on recent experimentation and analysis is expected to assist the design and development of the next generation of polymer feedstocks and machine designs for MatEx-based AM.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Viscoelastic Properties of Polymers
Jones, W. M. (1981) · Journal of Non-Newtonian Fluid Mechanics · doi:10.1016/0377-0257(81)80036-5 · Cited by 11,092
Additive manufacturing of metals
Herzog, D., Seyda, V., Wycisk, E., & Emmelmann, C. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.07.019 · Cited by 4,759
Reptation of a Polymer Chain in the Presence of Fixed Obstacles
de Gennes, P. G. (1971) · The Journal of Chemical Physics · doi:10.1063/1.1675789 · Cited by 4,284
Polymers for 3D Printing and Customized Additive Manufacturing
Ligon, S. C., Liska, R., Stampfl, J., Gurr, M., & Mülhaupt, R. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00074 · Cited by 3,741
Brereton, M. G. (1978) · Physics Bulletin · doi:10.1088/0031-9112/29/1/038 · Cited by 3,229
The status, challenges, and future of additive manufacturing in engineering
Gao, W., Zhang, Y., Ramanujan, D., Ramani, K., Chen, Y., Williams, C. B., Wang, C. C. L., Shin, Y. C., Zhang, S., & Zavattieri, P. D. (2015) · Computer-Aided Design · doi:10.1016/j.cad.2015.04.001 · Cited by 2,631
Anisotropic material properties of fused deposition modeling ABS
Ahn, S., Montero, M., Odell, D., Roundy, S., & Wright, P. K. (2002) · Rapid Prototyping Journal · doi:10.1108/13552540210441166 · Cited by 2,382
Correlation of dynamic and steady flow viscosities
Cox, W. P., & Merz, E. H. (1958) · Journal of Polymer Science · doi:10.1002/pol.1958.1202811812 · Cited by 2,092
Design for Additive Manufacturing: Trends, opportunities, considerations, and constraints
Thompson, M. K., Moroni, G., Vaneker, T., Fadel, G., Campbell, R. I., Gibson, I., Bernard, A., Schulz, J., Graf, P., Ahuja, B., et al. (2016) · CIRP Annals · doi:10.1016/j.cirp.2016.05.004 · Cited by 2,017
3D printing with polymers: Challenges among expanding options and opportunities
Stansbury, J. W., & Idacavage, M. J. (2016) · Dental Materials · doi:10.1016/j.dental.2015.09.018 · Cited by 1,732
Cited by
Outrequin, T. C. R., Gamonpilas, C., Siriwatwechakul, W., & Sreearunothai, P. (2023) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2022.111371 · Cited by 113
Ahmad, N. D., Kusmono, Wildan, M. W., & Herianto (2023) · Results in Engineering · doi:10.1016/j.rineng.2022.100842 · Cited by 103
Metadata
- Authors
- Das, A., Gilmer, E. L., Biria, S., & Bortner, M. J.
- Venue
- ACS Applied Polymer Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2021-02-08
- Volume
- 3
- Issue
- 3
- Pages
- 1218-1249
- ISSN
- 2637-6105 (ISSN-L)
- OpenAlex
- W3127534277
- Cited by
- 305
- References
- 125
- FWCI
- 13.71
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Importance of Polymer Rheology on Material Extrusion Additive Manufacturing: Correlating Process Physics to Print Properties. https://app.cochat.ai/papers/10.1021/acsapm.0c01228
- The paper
- Das, A., Gilmer, E. L., Biria, S., & Bortner, M. J. (2021). Importance of Polymer Rheology on Material Extrusion Additive Manufacturing: Correlating Process Physics to Print Properties. ACS Applied Polymer Materials. https://doi.org/10.1021/acsapm.0c01228
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.