The DOI matches its Crossref record; 21 of the 21 references it cites were found in a registry or an index.
Performance, emission and combustion characteristics of a diesel engine using Carbon Nanotubes blended Jatropha Methyl Ester Emulsions
Open accessAbstract
An experimental investigation was conducted in a single cylinder constant speed diesel engine to establish the effects of Carbon Nanotubes (CNT) with the Jatropha Methyl Esters (JME) emulsion fuel. The JME was produced from the Jatropha oil by transesterification process, and subsequently the JME emulsion fuel was prepared in the proportion of 93% of JME, 5% of water and 2% of surfactants (by volume) with a hydrophilic–lipophilic balance of 10. The Carbon Nanotubes are blended with the JME emulsion fuel in the various dosages systematically. The whole investigation was conducted in the diesel engine using the following fuels: neat JME, neat JME emulsion fuel and CNT blended JME emulsion fuels accordingly. The experimental results revealed an appreciable enhancement in the brake thermal efficiency for the CNT blended JME emulsion fuels compared to that of neat JME and neat JME emulsion fuel. At the full load, the brake thermal efficiency for the JME fuel observed was 24.80%, whereas it was 26.34% and 28.45% for the JME2S5W and JME2S5W100CNT fuels respectively. Further, due to the combined effects of micro-explosion and secondary atomization phenomena associated with the CNT blended JME emulsion fuels, the level of harmful pollutants in the exhaust gases (such as NOx and smoke) was drastically reduced when compared to that of neat JME. At the full load, the magnitude of NOx and smoke opacity for the neat JME was 1282 ppm and 69%, whereas it was 910 ppm and 49% for the JME2S5W100CNT fuel respectively.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Describing the uncertainties in experimental results
Moffat, R. J. (1988) · Experimental Thermal and Fluid Science · doi:10.1016/0894-1777(88)90043-x · Cited by 9,860
Review of the effects of biodiesel on NOx emissions
Hoekman, S. K., & Robbins, C. (2012) · Fuel Processing Technology · doi:10.1016/j.fuproc.2011.12.036 · Cited by 708
Catalytic production of biodiesel from soy-bean oil, used frying oil and tallow
Alcantara, R., Amores, J., Canoira, L., Fidalgo, E., Franco, M. J., & Navarro, A. (2000) · Biomass and Bioenergy · doi:10.1016/s0961-9534(00)00014-3 · Cited by 444
Kalligeros, S. S., Zannikos, F., Stournas, S., Lois, E., Anastopoulos, G., Teas, C., & Sakellaropoulos, F. (2002) · Biomass and Bioenergy · doi:10.1016/s0961-9534(02)00092-2 · Cited by 383
Increased Hot-Plate Ignition Probability for Nanoparticle-Laden Diesel Fuel
Tyagi, H., Phelan, P. E., Prasher, R., Peck, R., Lee, T., Pacheco, J. R., & Arentzen, P. (2008) · Nano Letters · doi:10.1021/nl080277d · Cited by 345
Nadeem, M., Rangkuti, C., Anuar, K. A., Haq, M. R. U., Tan, I. B., & Shah, S. S. (2006) · Fuel · doi:10.1016/j.fuel.2006.03.013 · Cited by 284
Characterization of light duty Diesel engine pollutant emissions using water-emulsified fuel
Armas, O., Ballesteros, R., Martos, F. J., & Agudelo, J. R. (2004) · Fuel · doi:10.1016/j.fuel.2004.11.015 · Cited by 257
Functionalized Graphene Sheet Colloids for Enhanced Fuel/Propellant Combustion
Sabourin, J. L., Dabbs, D. M., Yetter, R. A., Dryer, F. L., & Aksay, I. A. (2009) · ACS Nano · doi:10.1021/nn901006w · Cited by 254
An Experimental Study in a CI Engine Using Nanoadditive Blended Water–Diesel Emulsion Fuel
Basha, J. S., & Anand, R. B. (2011) · International Journal of Green Energy · doi:10.1080/15435075.2011.557844 · Cited by 245
Self-citationSadhik Basha, J., & Anand, R. B. (2011) · Journal of Renewable and Sustainable Energy · doi:10.1063/1.3575169 · Cited by 221
Self-citationPerformance evaluation of a diesel engine fueled with methyl ester of castor seed oil
Panwar, N. L., Shrirame, H. Y., Rathore, N. S., et al. (2009) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2009.07.007 · Cited by 208
Basha, J. S., & Anand, R. B. (2011) · Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy · doi:10.1177/2041296710394247 · Cited by 173
Self-citationEL-Kasaby, M., & Nemitallah, M. A. (2013) · Alexandria Engineering Journal · doi:10.1016/j.aej.2012.12.006 · Cited by 169
Ghojel, J. I., Honnery, D., & Al-Khaleefi, K. (2006) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2006.04.014 · Cited by 167
Performance and NOx emissions of a diesel engine fueled with biodiesel-diesel-water nanoemulsions
Koc, A. B., & Abdullah, M. (2013) · Fuel Processing Technology · doi:10.1016/j.fuproc.2012.09.039 · Cited by 164
Lin, C., & Lin, H.-A. (2006) · Fuel Processing Technology · doi:10.1016/j.fuproc.2006.07.008 · Cited by 148
Luján, J. M., Bermúdez, V., Tormos, B., & Plá, B. (2009) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2009.02.003 · Cited by 117
Arianna, F. C., Astorga, C., Martini, G., Manfredi, U., Anne, M., Rey, M., Santi, G. D., Alois, K., & Larsen, B. R. (2005) · Environmental Science & Technology · doi:10.1021/es048345v · Cited by 104
Use of Diethyl Ether Along with Water-Diesel Emulsion in a Di Diesel Engine
Subramanian, K. A., & Ramesh, A. (2002) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/2002-01-2720 · Cited by 83
The Use of Emulsion, Water Induction and EGR for Controlling Diesel Engine Emissions
Nazha, M. A. A., Rajakaruna, H., & wagstaff, S. (2001) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/2001-01-1941 · Cited by 79
Masimalai, S., Kerihuel, A., Bellettre, J., & Tazerout, M. L. (2005) · Proceedings of the Institution of Mechanical Engineers Part A Journal of Power and Energy · doi:10.1243/095765005x31243 · Cited by 26
Cited by
Soudagar, M. E. M., Nik-Ghazali, N.-N., Abul Kalam, M., Badruddin, I. A., Banapurmath, N. R., & Akram, N. (2018) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.10.019 · Cited by 528
Saxena, V., Kumar, N., & Saxena, V. K. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.11.067 · Cited by 414
Khalife, E., Tabatabaei, M., Demirbas, A., & Aghbashlo, M. (2017) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2016.10.001 · Cited by 387
A comprehensive review on the environmental impacts of diesel/biodiesel additives
Hosseinzadeh-Bandbafha, H., Tabatabaei, M., Aghbashlo, M., Khanali, M., & Demirbas, A. (2018) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.08.050 · Cited by 356
Chen, A. F., Akmal Adzmi, M., Adam, A., Othman, M. F., Kamaruzzaman, M. K., & Mrwan, A. G. (2018) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.06.004 · Cited by 262
Metadata
- Authors
- Sadhik Basha, J., & Anand, R. B.
- Venue
- Alexandria Engineering Journal
- Publisher
- Elsevier BV
- Published
- 2014-06
- Volume
- 53
- Issue
- 2
- Pages
- 259-273
- ISSN
- 1110-0168 (ISSN-L)
- OpenAlex
- W2072497328
- Cited by
- 349
- References
- 21
- FWCI
- 9.27
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.