The DOI matches its Crossref record; 29 of the 29 references it cites were found in a registry or an index.
Hybrid metal additive manufacturing: A state–of–the-art review
Open accessAbstract
This paper starts from the early developments and working principles of the additive manufacturing of polymers, continues with a glimpse on the extension to metals with identification and characterization of the two most widespread technologies, and ends with an overview of the recent developments in hybrid metal additive manufacturing. Earlier classifications of hybrid manufacturing with roots on the utilization of primarily processed raw materials in the form of ingots, sheets, rods, tubes, profiles, powders and pellets are revisited in the light of the emergence of a new type of hybridization resulting from the combination of additive manufacturing with traditional manufacturing processes. Special emphasis is given to the combination of additive manufacturing with forming processes with the two-fold objective of (i) increasing the applicability domain of metal additive manufacturing and overcoming its limitations related to low productivity, metallurgical defects, rough surface quality and lack of dimensional precision, and (ii) adding flexibility and fostering new applications of traditional forming processes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Additive manufacturing of metallic components – Process, structure and properties
DebRoy, T., Wei, H. L., Zuback, J. S., Mukherjee, T., Elmer, J. W., Milewski, J. O., Beese, A. M., Wilson-Heid, A., De, A., & Zhang, W. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.10.001 · Cited by 8,805
Wire + Arc Additive Manufacturing
Williams, S., Martina, F., Addison, A. C., Ding, J., Pardal, G., & Colegrove, P. A. (2015) · Materials Science and Technology · doi:10.1179/1743284715y.0000000073 · Cited by 1,971
Wu, B., Pan, Z., Ding, D., Cuiuri, D., Li, H., Xu, J., & Norrish, J. (2018) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2018.08.001 · Cited by 1,577
Additive manufacturing of metallic components by selective electron beam melting — a review
Körner, C. (2016) · International Materials Reviews · doi:10.1080/09506608.2016.1176289 · Cited by 1,106
Binder jetting: A review of process, materials, and methods
Ziaee, M., & Crane, N. B. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2019.05.031 · Cited by 819
Gonzalez-Gutierrez, J., Cano, S., Schuschnigg, S., Kukla, C., Sapkota, J., & Holzer, C. (2018) · Materials · doi:10.3390/ma11050840 · Cited by 713
Automatic method for fabricating a three-dimensional plastic model with photo-hardening polymer
Kodama, H. (1981) · Review of Scientific Instruments · doi:10.1063/1.1136492 · Cited by 668
Baufeld, B., der Biest, O. V., & Gault, R. (2009) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2009.11.032 · Cited by 601
Investigation of the benefits of plasma deposition for the additive layer manufacture of Ti–6Al–4V
Martina, F., Mehnen, J., Williams, S., et al. (2012) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2012.02.002 · Cited by 588
Colegrove, P. A., Coules, H., Fairman, J., et al. (2013) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2013.04.012 · Cited by 520
Cited by
Nazir, A., Gokcekaya, O., Md Masum Billah, K., Ertugrul, O., Jiang, J., Sun, J., & Hussain, S. (2023) · Materials & Design · doi:10.1016/j.matdes.2023.111661 · Cited by 773
An overview of modern metal additive manufacturing technology
Armstrong, M., Mehrabi, H., & Naveed, N. (2022) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2022.10.060 · Cited by 549
Kanishka, K., & Acherjee, B. (2023) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2023.10.024 · Cited by 343
The Current State of Research of Wire Arc Additive Manufacturing (WAAM): A Review
Treutler, K., & Wesling, V. (2021) · Applied Sciences · doi:10.3390/app11188619 · Cited by 293
Recent progress and perspectives in additive manufacturing of magnesium alloys
Zeng, Z., Salehi, M., Kopp, A., Xu, S., Esmaily, M., & Birbilis, N. (2022) · Journal of Magnesium and Alloys · doi:10.1016/j.jma.2022.03.001 · Cited by 264
Metadata
- Authors
- Pragana, J. P. M., Sampaio, R. F. V., Bragança, I. M. F., Silva, C. M. A., & Martins, P. A. F.
- Venue
- Advances in Industrial and Manufacturing Engineering
- Publisher
- Elsevier BV
- Published
- 2021-05
- Volume
- 2
- Pages
- 100032
- ISSN
- 2666-9129 (ISSN-L)
- OpenAlex
- W3128420155
- Cited by
- 256
- References
- 29
- FWCI
- 18.27
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Hybrid metal additive manufacturing: A state–of–the-art review. https://app.cochat.ai/papers/10.1016/j.aime.2021.100032
- The paper
- Pragana, J. P. M., Sampaio, R. F. V., Bragança, I. M. F., Silva, C. M. A., & Martins, P. A. F. (2021). Hybrid metal additive manufacturing: A state–of–the-art review. Advances in Industrial and Manufacturing Engineering. https://doi.org/10.1016/j.aime.2021.100032
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.