CoChat

The steam reforming of phenol reaction over supported-Rh catalysts

Polychronopoulou, K., Costa, C.N., Efstathiou, A.M. · 2004 · Applied Catalysis A: General
Cited by 97

The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.

Abstract

The steam reforming of phenol reaction towards H 2 production was studied in the 575–730 °C range over Rh supported on CeO 2 , ZrO 2 and SiO 2 single metal oxides and various mixed metal oxides such as CeO 2 –SiO 2 , ZrO 2 –SiO 2 and CeO 2 –ZrO 2 . The effect of synthesis method (wet impregnation versus sol–gel) of the mixed metal oxide used as support of Rh on the activity and selectivity of reaction towards hydrogen formation has also been investigated. It was found that the 1.5 wt.% Rh/Ce–Zr–O catalyst, the support of which was prepared by the sol–gel method, exhibits better performance than a commercial Ni-based catalyst both solids examined under the same experimental conditions. The 1.5 wt.% Rh/Ce–Zr–O catalyst presented practically constant hydrogen product concentration (∼10 mol%) in the 575–730 °C range and after using a 0.5% C 6 H 5 OH/40% H 2 O/He feed gas mixture at a space velocity of 80.000 h −1 , to be compared to 8–9.5 mol% H 2 obtained over the commercial Ni-based catalyst. This particular supported-Rh catalyst showed also no more than 18% drop in activity after 24 h of continuous reaction. The effect of Rh loading (0.5 and 1.5 wt.%) on catalyst activity towards H 2 production was studied over Rh supported on CeO 2 and ZrO 2 . It was found that the steam reforming of phenol reaction is favored over catalysts with small Rh particles. The effect of the partial pressure of water and phenol in the reaction feed stream on catalyst activity towards hydrogen was found to strongly depend on catalyst support chemical composition and reaction temperature. Increasing the water concentration in the 20–40 mol% range resulted in a significant increase of H 2 product yield. A similar result was also obtained in the case of phenol in the 0.3–0.5 mol% range. The accumulation of carbonaceous deposits during reaction conditions was investigated by temperature-programmed oxidation (TPO) and transient isothermal reaction with steam experiments following reaction. More than one kind of carbonaceous species have been identified with varying composition and reactivity towards oxygen and steam.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1016/j.apcata.2004.05.002

Cites

1 of 1 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Cited by

See all 97

Metadata

Authors
Polychronopoulou, K., Costa, C. N., & Efstathiou, A. M.
Venue
Applied Catalysis A: General
Publisher
Elsevier BV
Published
2004-09
Volume
272
Issue
1-2
Pages
37-52
ISSN
0926-860X (ISSN-L)
OpenAlex
W2087421299
Cited by
97
References
1
FWCI
1.59
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.