The steam reforming of phenol reaction over supported-Rh catalysts
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
The steam reforming of phenol reaction towards H 2 production was studied in the 575–730 °C range over Rh supported on CeO 2 , ZrO 2 and SiO 2 single metal oxides and various mixed metal oxides such as CeO 2 –SiO 2 , ZrO 2 –SiO 2 and CeO 2 –ZrO 2 . The effect of synthesis method (wet impregnation versus sol–gel) of the mixed metal oxide used as support of Rh on the activity and selectivity of reaction towards hydrogen formation has also been investigated. It was found that the 1.5 wt.% Rh/Ce–Zr–O catalyst, the support of which was prepared by the sol–gel method, exhibits better performance than a commercial Ni-based catalyst both solids examined under the same experimental conditions. The 1.5 wt.% Rh/Ce–Zr–O catalyst presented practically constant hydrogen product concentration (∼10 mol%) in the 575–730 °C range and after using a 0.5% C 6 H 5 OH/40% H 2 O/He feed gas mixture at a space velocity of 80.000 h −1 , to be compared to 8–9.5 mol% H 2 obtained over the commercial Ni-based catalyst. This particular supported-Rh catalyst showed also no more than 18% drop in activity after 24 h of continuous reaction. The effect of Rh loading (0.5 and 1.5 wt.%) on catalyst activity towards H 2 production was studied over Rh supported on CeO 2 and ZrO 2 . It was found that the steam reforming of phenol reaction is favored over catalysts with small Rh particles. The effect of the partial pressure of water and phenol in the reaction feed stream on catalyst activity towards hydrogen was found to strongly depend on catalyst support chemical composition and reaction temperature. Increasing the water concentration in the 20–40 mol% range resulted in a significant increase of H 2 product yield. A similar result was also obtained in the case of phenol in the 0.3–0.5 mol% range. The accumulation of carbonaceous deposits during reaction conditions was investigated by temperature-programmed oxidation (TPO) and transient isothermal reaction with steam experiments following reaction. More than one kind of carbonaceous species have been identified with varying composition and reactivity towards oxygen and steam.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The effect of Fe and other promoters on the activity of Pd/ceria for the water-gas shift reaction
Wang, X., & Gorte, R. J. (2003) · Applied Catalysis A: General · doi:10.1016/s0926-860x(03)00095-4 · Cited by 102
Cited by
The reduction and control technology of tar during biomass gasification/pyrolysis: An overview
Han, J., & Kim, H. (2008) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2006.07.015 · Cited by 835
Tar reduction in biomass producer gas via mechanical, catalytic and thermal methods: A review
Anis, S., & Zainal, Z. A. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2011.02.018 · Cited by 802
Steam reforming of model compounds and fast pyrolysis bio-oil on supported noble metal catalysts
Rioche, C., Kulkarni, S., Meunier, F. C., Breen, J. P., & Burch, R. (2005) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2005.04.015 · Cited by 443
Catalytic steam reforming of bio-oil
Trane, R., Dahl, S., Skjøth-Rasmussen, M. S., & Jensen, A. D. (2012) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2012.01.023 · Cited by 401
Renewable hydrogen production from bio-oil derivative via catalytic steam reforming: An overview
Nabgan, W., Tuan Abdullah, T. A., Mat, R., Nabgan, B., Gambo, Y., Ibrahim, M., Ahmad, A., Jalil, A. A., Triwahyono, S., & Saeh, I. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.05.069 · Cited by 207
Soliman, A., AlAmoodi, N., Karanikolos, G. N., Doumanidis, C. C., & Polychronopoulou, K. (2020) · Nanomaterials · doi:10.3390/nano10112198 · Cited by 53
Self-citation
Metadata
- Authors
- Polychronopoulou, K., Costa, C. N., & Efstathiou, A. M.
- Venue
- Applied Catalysis A: General
- Publisher
- Elsevier BV
- Published
- 2004-09
- Volume
- 272
- Issue
- 1-2
- Pages
- 37-52
- ISSN
- 0926-860X (ISSN-L)
- OpenAlex
- W2087421299
- Cited by
- 97
- References
- 1
- FWCI
- 1.59
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.