Elucidating the effect of desilication on aluminum-rich ZSM-5 zeolite and its consequences on biomass catalytic fast pyrolysis
Open accessThe DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Abstract
Abstract Catalytic fast pyrolysis (CFP) offers a simple and robust route to convert raw lignocellulosic biomass to aromatic hydrocarbons. During CFP, cellulose, hemicellulose, and lignin are first thermally decomposed to bio-oil vapors that are further converted to aromatics in the presence of a ZSM-5 zeolite catalyst. The high temperatures required for CFP also favor coke formation, an undesired byproduct, through condensation of the oxygenated intermediates on ZSM-5′s outer surface and/or secondary reactions inside its micropores. Introducing mesopores through desilication represents a possible strategy to enhance mass transport and intracrystalline diffusion, and consequently favor aromatic production over undesired coke formation. Here, we study the effect of desilication on the structure, acidity, and performance of aluminum-rich ZSM-5. Detailed characterization of the obtained zeolite catalysts indicates that mild desilication conditions do not significantly affect the elemental composition, crystallographic structure, microporosity, and distribution of aluminum atoms in framework and extraframework sites. However, the number of accessible Bronsted acid sites increased by ∼50% as a result of the enhanced mesoporosity. Desilication increased the aromatic yields obtained for red oak pyrolysis (27.9%) compared to the parent zeolite (23.9%), without impacting the liquid product distribution (67.4% selectivity to benzene, toluene, and xylene). Our results suggest the catalytic performance could be further improved by enlarging the mouth of ink bottle shaped mesopores in order to further enhance mass transport between the gas phase and the zeolite’s micropore network.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Pyrolysis of Wood/Biomass for Bio-oil: A Critical Review
Mohan, D., Pittman, C. U., & Steele, P. H. (2006) · Energy & Fuels · doi:10.1021/ef0502397 · Cited by 5,663
Design of hierarchical zeolite catalysts by desilication
Verboekend, D., & Pérez-Ramírez, J. (2011) · Catalysis Science & Technology · doi:10.1039/c1cy00150g · Cited by 712
Factors that Determine Zeolite Stability in Hot Liquid Water
Zhang, L., Chen, K., Chen, B., White, J. L., & Resasco, D. E. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b07398 · Cited by 208
Schwartz, T. J., O’Neill, B. J., Shanks, B. H., & Dumesic, J. A. (2014) · ACS Catalysis · doi:10.1021/cs500364y · Cited by 175
Cited by
Advances in porous and nanoscale catalysts for viable biomass conversion
Sudarsanam, P., Peeters, E., Makshina, E. V., Parvulescu, V. I., & Sels, B. F. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00452h · Cited by 643
Xia, Q., Liu, Y., Meng, J., Cheng, W., Chen, W., Liu, S., Liu, Y., Li, J., & Yu, H. (2018) · Green Chemistry · doi:10.1039/c8gc00900g · Cited by 552
Waste to bioenergy: a review on the recent conversion technologies
Lee, S. Y., Sankaran, R., Chew, K. W., Tan, C. H., Krishnamoorthy, R., Chu, D.-T., & Show, P.-L. (2019) · BMC Energy · doi:10.1186/s42500-019-0004-7 · Cited by 529
Regulation of the Si/Al ratios and Al distributions of zeolites and their impact on properties
Li, J., Gao, M., Yan, W., & Yu, J. (2023) · Chemical Science · doi:10.1039/d2sc06010h · Cited by 404
Nishu, Liu, R., Rahman, M. M., Sarker, M., Chai, M., Li, C., & Cai, J. (2020) · Fuel Processing Technology · doi:10.1016/j.fuproc.2019.106301 · Cited by 319
Metadata
- Authors
- Hoff, T. C., Gardner, D. W., Thilakaratne, R., Proano-Aviles, J., Brown, R. C., & Tessonnier, J.-P.
- Venue
- Applied Catalysis A: General
- Publisher
- Elsevier BV
- Published
- 2017-01
- Volume
- 529
- Pages
- 68-78
- ISSN
- 0926-860X (ISSN-L)
- OpenAlex
- W2530142556
- Cited by
- 136
- References
- 4
- FWCI
- 6.38
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.