First pilot scale study of basic vs acidic catalysts in biomass pyrolysis: Deoxygenation mechanisms and catalyst deactivation
The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Abstract
In order for catalytic biomass pyrolysis to be economically sustainable, low cost and highly efficient catalysts are needed. In a previous work, Magnesium oxide (MgO) basic catalysts produced from natural magnesite (MgCO3) were found to be highly efficient alternatives to zeolitic catalysts which apart from their relatively high cost, they are easily deactivated due to biomass alkali deposition. In order to validate these findings in pilot scale, these natural MgO catalysts were investigated in a circulating fluidized bed pilot scale unit and were compared to a commercially available ZSM-5 catalyst. This is to the best of our knowledge the first attempt to evaluate a basic catalyst in biomass fast pyrolysis in a pilot unit employing commercially relevant process technology. The basic sites of the MgO catalysts enhanced ketonization and aldol condensation reactions, as it was verified by 2DGC-TOFMS analyses of the produced bio-oils. Deoxygenation was achieved mainly via formation of CO2, while H2O yield was substantially reduced in comparison to the ZSM-5 catalyst. As a result, bio-oils richer in hydrogen were obtained by the use of MgOs. However, the MgO catalysts led to a significant increase of the catalytically produced coke compared to ZSM-5. The effect of MgO properties, such as surface area and basicity on product yields and bio-oil composition was elaborated. In contrast to the acidic ZSM-5, no alkali metals were found to deposit on MgO, indicating different deactivation mechanisms between acidic and basic catalysts in biomass fast pyrolysis.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Review of fast pyrolysis of biomass and product upgrading
Bridgwater, A. V. (2012) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2011.01.048 · Cited by 4,856
Bio-oil production and upgrading research: A review
Xiu, S., & Shahbazi, A. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.04.028 · Cited by 1,127
A review of the chemical and physical mechanisms of the storage stability of fast pyrolysis bio-oils
Diebold, J. P. (1999) · doi:10.2172/753818 · Cited by 549
Product quality and catalyst deactivation in a four day catalytic fast pyrolysis production run
Paasikallio, V., Lindfors, C., Kuoppala, E., Solantausta, Y., Oasmaa, A., Lehto, J., & Lehtonen, J. (2014) · Green Chemistry · doi:10.1039/c4gc00571f · Cited by 154
Cited by
Chen, X., Che, Q., Li, S., Liu, Z., Yang, H., Chen, Y., Wang, X., Shao, J., & Chen, H. (2019) · Fuel Processing Technology · doi:10.1016/j.fuproc.2019.106180 · Cited by 460
Lee, X. J., Ong, H. C., Gan, Y. Y., Chen, W.-H., & Mahlia, T. M. I. (2020) · Energy Conversion and Management · doi:10.1016/j.enconman.2020.112707 · Cited by 465
Ryu, H. W., Kim, D. H., Jae, J., Lam, S. S., Park, E. D., & Park, Y.-K. (2020) · Bioresource Technology · doi:10.1016/j.biortech.2020.123473 · Cited by 336
Wu, Y., Wang, H., Li, H., Han, X., Zhang, M., Sun, Y., Fan, X., Tu, R., Zeng, Y., Xu, C. C., et al. (2022) · Renewable Energy · doi:10.1016/j.renene.2022.07.031 · Cited by 274
Dai, L., Wang, Y., Liu, Y., He, C., Ruan, R., Yu, Z., Jiang, L., Zeng, Z., & Wu, Q. (2020) · Science of The Total Environment · doi:10.1016/j.scitotenv.2020.142386 · Cited by 264
Liu, R., Sarker, M., Rahman, M. M., Li, C., Chai, M., Nishu, Cotillon, R., & Scott, N. R. (2020) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2020.100852 · Cited by 264
Biofuels and renewable chemicals production by catalytic pyrolysis of cellulose: a review
Hassan, N. S., Jalil, A. A., Hitam, C. N. C., Vo, D. V. N., & Nabgan, W. (2020) · Environmental Chemistry Letters · doi:10.1007/s10311-020-01040-7 · Cited by 176
Tian, X., Wang, Y., Zeng, Z., Dai, L., Xu, J., Cobb, K., Ke, L., Zou, R., Liu, Y., & Ruan, R. (2022) · Green Chemistry · doi:10.1039/d1gc04537g · Cited by 128
Zhong, S., Zhang, B., Liu, C., Shujaa aldeen, A., Mwenya, S., & Zhang, H. (2022) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2022.105544 · Cited by 86
Yang, H., Han, T., Shi, Z., Sun, Y., Jiang, J., Sandström, L., Jönsson, P. G., & Yang, W. (2022) · Fuel Processing Technology · doi:10.1016/j.fuproc.2021.107103 · Cited by 47
Metadata
- Authors
- Kalogiannis, K. G., Stefanidis, S. D., Karakoulia, S. A., Triantafyllidis, K. S., Yiannoulakis, H., Michailof, C., & Lappas, A. A.
- Venue
- Applied Catalysis B: Environmental
- Publisher
- Elsevier BV
- Published
- 2018-12
- Volume
- 238
- Pages
- 346-357
- ISSN
- 0926-3373 (ISSN-L)
- OpenAlex
- W2884095523
- Cited by
- 141
- References
- 4
- FWCI
- 5.95
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.