The DOI matches its Crossref record; 58 of the 58 references it cites were found in a registry or an index.
Dual functional catalytic materials of Ni over Ce-modified CaO sorbents for integrated CO2 capture and conversion
Open accessAbstract
Abstract Excessive anthropogenic CO2 emission in the atmosphere is considered as one of the main contributions to the serious climate changes. However, with the growth of global economics, more fossil fuels will be consumed to feed the global activity, especially in developing countries. Thus, CO2 needs to be captured for storage or converted to fuels or value-added chemicals. Herein, we propose and demonstrate a one-pot method synthesized dual functional materials (DFMs), which contain a sorbent coupled with a catalyst component, allowing the sorbent regeneration and CO2 conversion to CO are performed simultaneously in a single reactor. This process requires no additional thermal energy for the regeneration of sorbents. In addition, CeO2 is incorporated into the DFMs to largely enhance the stability of the materials for the process, and the influence of different Ce loadings on the performance of integrated CO2 capture and conversion is studied. It is found that the DFMs with a Ca/Ni/Ce molar ratio of 1:0.1:0.033 displays almost 100% CO selectivity and 51.8% CO2 conversion in the reverse water-gas shift (RWGS) reaction and a remarkable cyclic stability after 20 cycles of integrated CO2 capture and conversion. Therefore, the incorporation of Ce into DFMs has two profits, for one thing, the oxygen vacancies generated by CeO2 directly reduces the dissociated CO2 regenerated from the DFMs, demonstrating the high CO yield; for another, the well-dispersed CeO2, which could act as a physical barrier, effectively prevents the growth and agglomeration of CaO crystallite and NiO species.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Change, I. P. O. C. (2015) · Cambridge University Press eBooks · doi:10.1017/cbo9781107415416 · Cited by 4,693
Paris Agreement climate proposals need a boost to keep warming well below 2 °C
Rogelj, J., den Elzen, M., Höhne, N., Fransen, T., Fekete, H., Winkler, H., Schaeffer, R., Sha, F., Riahi, K., & Meinshausen, M. (2016) · Nature · doi:10.1038/nature18307 · Cited by 3,637
Climate change 2014 : mitigation of climate change
Edenhofer, O., Pichs-Madruga, R., & Sokona, Y. (2014) · University of North Texas Digital Library (University of North Texas) · Cited by 1,637
Cuéllar-Franca, R. M., & Azapagic, A. (2015) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2014.12.001 · Cited by 1,571
Palladium‐Catalyzed Carbonylation Reactions of Aryl Halides and Related Compounds
Brennführer, A., Neumann, H., & Beller, M. (2009) · Angewandte Chemie International Edition · doi:10.1002/anie.200900013 · Cited by 1,463
The calcium looping cycle for large-scale CO2 capture
Blamey, J., Anthony, E. J., Wang, J., & Fennell, P. S. (2010) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2009.10.001 · Cited by 1,044
Self-citationPalladium-catalyzed carbonylative coupling reactions between Ar–X and carbon nucleophiles
Wu, X.-F., Neumann, H., & Beller, M. (2011) · Chemical Society Reviews · doi:10.1039/c1cs15109f · Cited by 1,004
A Twin Fluid-Bed Reactor for Removal of CO2 from Combustion Processes
Shimizu, T., Hirama, T., Hosoda, H., Kitano, K., Inagaki, M., & Tejima, K. (1999) · Chemical Engineering Research and Design · doi:10.1205/026387699525882 · Cited by 730
A comparative study of water-gas-shift reaction over ceria supported metallic catalysts
Hilaire, S., Wang, X., Luo, T., Gorte, R. J., & Wagner, J. P. (2001) · Applied Catalysis A General · doi:10.1016/s0926-860x(01)00535-x · Cited by 559
Du, X., Zhang, D., Shi, L., Gao, R., & Zhang, J. (2012) · The Journal of Physical Chemistry C · doi:10.1021/jp300543r · Cited by 513
Ni/CeO2-ZrO2 catalysts for the dry reforming of methane
Kambolis, A., Matralis, H., Trovarelli, A., & Papadopoulou, C. (2010) · Applied Catalysis A: General · doi:10.1016/j.apcata.2010.01.013 · Cited by 459
CO2 capture by adsorption: Materials and process development
Chaffee, A. L., Knowles, G. P., Liang, Z., Zhang, J., Xiao, P., & Webley, P. A. (2007) · International Journal of Greenhouse Gas Control · doi:10.1016/s1750-5836(07)00031-x · Cited by 416
Dual function materials for CO2 capture and conversion using renewable H2
Duyar, M. S., Treviño, M. A. A., & Farrauto, R. J. (2015) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2014.12.025 · Cited by 411
Determination of the Critical Product Layer Thickness in the Reaction of CaO with CO2
Alvarez, D., & Abanades, J. C. (2005) · Industrial & Engineering Chemistry Research · doi:10.1021/ie050305s · Cited by 401
Goguet, A., Meunier, F. C., Tibiletti, D., Breen, J. P., & Burch, R. (2004) · The Journal of Physical Chemistry B · doi:10.1021/jp047242w · Cited by 377
Calcium looping sorbents for CO2 capture
Erans, M., Manovic, V., & Anthony, E. J. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.07.074 · Cited by 369
Perejón, A., Romeo, L. M., Lara, Y., Lisbona, P., Martínez, A., & Valverde, J. M. (2016) · Applied Energy · doi:10.1016/j.apenergy.2015.10.121 · Cited by 367
Yao, D., Zhang, Y., Williams, P. T., Yang, H., & Chen, H. (2018) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2017.09.035 · Cited by 347
Performance Enhancement of Calcium Oxide Sorbents for Cyclic CO2 Capture—A Review
Liu, W., An, H., Qin, C., Yin, J., Wang, G., Feng, B., & Xu, M. (2012) · Energy & Fuels · doi:10.1021/ef300220x · Cited by 320
On the climate change mitigation potential of CO 2 conversion to fuels
Abanades, J. C., Rubin, E. S., Mazzotti, M., & Herzog, H. J. (2017) · Energy & Environmental Science · doi:10.1039/c7ee02819a · Cited by 302
Integrated CO2 Capture and Conversion as an Efficient Process for Fuels from Greenhouse Gases
Kim, S. M., Abdala, P. M., Broda, M., Hosseini, D., Copéret, C., & Müller, C. (2018) · ACS Catalysis · doi:10.1021/acscatal.7b03063 · Cited by 290
Jacobs, G., Graham, U. M., Chenu, E., Patterson, P. M., Dozier, A., & Davis, B. H. (2004) · Journal of Catalysis · doi:10.1016/j.jcat.2004.11.031 · Cited by 287
Duyar, M. S., Wang, S., Arellano-Treviño, M. A., & Farrauto, R. J. (2016) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2016.05.003 · Cited by 277
Goodrich, B. F., de la Fuente, J. C., Gurkan, B. E., Lopez, Z. K., Price, E. A., Huang, Y., & Brennecke, J. F. (2011) · The Journal of Physical Chemistry B · doi:10.1021/jp2015534 · Cited by 272
Studies of the water-gas-shift reaction with ceria-supported precious metals
Gorte, R. J., & Zhao, S. (2005) · Catalysis Today · doi:10.1016/j.cattod.2005.03.034 · Cited by 270
Melaet, G., Ralston, W. T., Li, C.-S., Alayoglu, S., An, K., Musselwhite, N., Kalkan, B., & Somorjai, G. A. (2014) · Journal of the American Chemical Society · doi:10.1021/ja412447q · Cited by 267
Cai, M., Wen, J., Chu, W., Cheng, X., & Li, Z. (2011) · Journal of Natural Gas Chemistry · doi:10.1016/s1003-9953(10)60187-9 · Cited by 252
Flame-Made Durable Doped-CaO Nanosorbents for CO2 Capture
Lu, H., Khan, A., Pratsinis, S. E., & Smirniotis, P. G. (2009) · Energy & Fuels · doi:10.1021/ef8007882 · Cited by 249
Peng, X., Cheng, K., Kang, J., Gu, B., Yu, X., Zhang, Q., & Wang, Y. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201411708 · Cited by 244
Cost Structure of a Postcombustion CO2 Capture System Using CaO
Abanades, J. C., Grasa, G., Alonso, M., Rodriguez, N., Anthony, E. J., & Romeo, L. M. (2007) · Environmental Science & Technology · doi:10.1021/es070099a · Cited by 236
Role of Lattice Distortions in the Oxygen Storage Capacity of Divalently Doped CeO2
Kehoe, A. B., Scanlon, D. O., & Watson, G. W. (2011) · Chemistry of Materials · doi:10.1021/cm201617d · Cited by 220
Carbon Dioxide Capture Using Dry Sodium-Based Sorbents
Liang, Y., Harrison, D. P., Gupta, R. P., Green, D. A., & McMichael, W. J. (2004) · Energy & Fuels · doi:10.1021/ef030158f · Cited by 212
Xiao, J., & Yang, S. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm31057k · Cited by 202
Economics of CO2 Capture Using the Calcium Cycle with a Pressurized Fluidized Bed Combustor
MacKenzie, A., Granatstein, D. L., Anthony, E. J., & Abanades, J. C. (2007) · Energy & Fuels · doi:10.1021/ef0603378 · Cited by 200
Effect of Cerium Oxide Doping on the Performance of CaO-Based Sorbents during Calcium Looping Cycles
Wang, S., Fan, S., Fan, L., Zhao, Y., & Ma, X. (2015) · Environmental Science & Technology · doi:10.1021/es5052843 · Cited by 180
Absorption of carbon dioxide into aqueous blends of 2-amino-2-methyl-1-propanol and monoethanolamine
Mandal, B. P., & Bandyopadhyay, S. S. (2006) · Chemical Engineering Science · doi:10.1016/j.ces.2006.04.002 · Cited by 177
Li, D., Gong, Y., Zhang, Y., Luo, C., Li, W., Fu, Q., & Pan, C. (2015) · Scientific Reports · doi:10.1038/srep12903 · Cited by 175
Behavior of CaTiO3/Nano-CaO as a CO2 Reactive Adsorbent
Wu, S. F., & Zhu, Y. Q. (2010) · Industrial & Engineering Chemistry Research · doi:10.1021/ie900900r · Cited by 175
Carbon Dioxide Conversion by Reverse Water–Gas Shift Chemical Looping on Perovskite-Type Oxides
Daza, Y. A., Kent, R. A., Yung, M. M., & Kuhn, J. N. (2014) · Industrial & Engineering Chemistry Research · doi:10.1021/ie5002185 · Cited by 173
Ca-based synthetic materials with enhanced CO 2 capture efficiency
Valverde, J. M. (2012) · Journal of Materials Chemistry A · doi:10.1039/c2ta00096b · Cited by 169
Improving the stability of synthetic CaO-based CO2 sorbents by structural promoters
Antzaras, A. N., Heracleous, E., & Lemonidou, A. A. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.07.026 · Cited by 156
Preparation of CaO–Al2O3 sorbent and CO2 capture performance at high temperature
Zhang, M., Peng, Y., Sun, Y., et al. (2013) · Fuel · doi:10.1016/j.fuel.2013.03.078 · Cited by 155
Zheng, Q., Farrauto, R. J., & Nguyen, A. C. (2016) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.6b01275 · Cited by 143
Low temperature steam reforming of methane over Ni–Ce(1−)Zr()O2 catalysts under severe conditions
Roh, H., Eum, I.-H., & Jeong, D. (2011) · Renewable Energy · doi:10.1016/j.renene.2011.08.013 · Cited by 135
Gonzalez-delaCruz, V. M., Ternero, F., Pereñíguez, R., et al. (2010) · Applied Catalysis A General · doi:10.1016/j.apcata.2010.05.027 · Cited by 128
Guo, H., Feng, J., Zhao, Y., Wang, S., & Ma, X. (2017) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2017.03.015 · Cited by 117
Gonçalves, R. V., Vono, L. L. R., Wojcieszak, R., Dias, C. S. B., Wender, H., Teixeira‐Neto, É., & Rossi, L. M. (2017) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2017.02.081 · Cited by 114
Screening Test of Solid Amine Sorbents for CO2 Capture
Lee, S., Filburn, T. P., Gray, M., Park, J., & Song, H. J. (2008) · Industrial & Engineering Chemistry Research · doi:10.1021/ie8006984 · Cited by 112
Broda, M., Kierzkowska, A., & Müller, C. R. (2012) · Environmental Science & Technology · doi:10.1021/es302757e · Cited by 102
Reverse water–gas shift reaction over ceria nanocube synthesized by hydrothermal method
Liu, Y., Li, Z., Xü, H., & Han, Y. (2015) · Catalysis Communications · doi:10.1016/j.catcom.2015.12.011 · Cited by 73
Yancheshmeh, M. S., Radfarnia, H. R., & Iliuta, M. C. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b01627 · Cited by 72
Deterioration of the oxygen storage and release properties of CeZrO4 by incorporation of calcium
Granados, M. L., Gurbani, A., Mariscal, R., & Fierro, J. L. G. (2008) · Journal of Catalysis · doi:10.1016/j.jcat.2008.03.011 · Cited by 65
Pilot testing of enhanced sorbents for calcium looping with cement production
Erans, M., Jeremiáš, M., Zheng, L., Yao, J. G., Blamey, J., Manovic, V. M., Fennell, P. S., & Anthony, E. J. (2018) · Applied Energy · doi:10.1016/j.apenergy.2018.05.039 · Cited by 59
Ma, X., Li, Y., Chi, C., Zhang, W., Shi, J., & Duan, L. (2017) · Energy & Fuels · doi:10.1021/acs.energyfuels.7b00676 · Cited by 56
Self-citationBoron‐Functionalized Graphene Oxide‐Organic Frameworks for Highly Efficient CO2 Capture
Haque, E., Islam, M. M., Pourazadi, E., Sarkar, S., Harris, A. T., Minett, A. I., Yanmaz, E., Alshehri, S. M., Ide, Y., Wu, K. C. ‐., et al. (2016) · Chemistry - An Asian Journal · doi:10.1002/asia.201601442 · Cited by 52
CO2 capture performance of Ca-Mg acetates at realistic Calcium Looping conditions
Miranda-Pizarro, J., Perejón, A., Valverde, J. M., Pérez-Maqueda, L. A., & Sánchez-Jiménez, P. E. (2017) · Fuel · doi:10.1016/j.fuel.2017.01.119 · Cited by 44
Development of Ca/KIT-6 adsorbents for high temperature CO2 capture
Sun, H., Parlett, C. M. A., Isaacs, M. A., Liu, X., Adwek, G., Wang, J., Shen, B., Huang, J., & Wu, C. (2018) · Fuel · doi:10.1016/j.fuel.2018.07.044 · Cited by 42
Self-citation
Cited by
Industrial carbon dioxide capture and utilization: state of the art and future challenges
Gao, W., Liang, S., Wang, R., Jiang, Q., Zhang, Y., Zheng, Q., Xie, B., Toe, C. Y., Zhu, X., Wang, J., et al. (2020) · Chemical Society Reviews · doi:10.1039/d0cs00025f · Cited by 1,388
Self-citationA Review of Non-Thermal Plasma Technology: A novel solution for CO2 conversion and utilization
George, A., Shen, B., Craven, M., Wang, Y., Kang, D., Wu, C., & Tu, X. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.109702 · Cited by 497
Self-citationDunstan, M. T., Donat, F., Bork, A. H., Grey, C. P., & Müller, C. R. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00100 · Cited by 481
Recent advances in integrated CO2capture and utilization: a review
Sun, S., Sun, H., Williams, P. T., & Wu, C. (2021) · Sustainable Energy & Fuels · doi:10.1039/d1se00797a · Cited by 356
Self-citationDual-Function Materials for CO2 Capture and Conversion: A Review
Omodolor, I. S., Otor, H. O., Andonegui, J. A., Allen, B. J., & Alba-Rubio, A. C. (2020) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.0c02218 · Cited by 355
Metadata
- Authors
- Sun, H., Wang, J., Zhao, J., Shen, B., Shi, J., Huang, J., & Wu, C.
- Venue
- Applied Catalysis B: Environmental
- Publisher
- Elsevier BV
- Published
- 2019-05
- Volume
- 244
- Pages
- 63-75
- ISSN
- 0926-3373 (ISSN-L)
- OpenAlex
- W2901653228
- Cited by
- 336
- References
- 58
- FWCI
- 10.07
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.