The DOI matches its Crossref record.
Hydrogen-rich syngas production and tar removal from biomass gasification using sacrificial tyre pyrolysis char
Abstract
Carbonaceous materials have been proven to have a high catalytic activity for tar removal from the syngas produced from biomass gasification. The simultaneous reforming and gasification of pyrolysis gases and char could have a significant role in increasing the gas yield and decreasing the tar in the product syngas. This study investigates the use of tyre char as a catalyst for H2-rich syngas production and tar reduction during the pyrolysis-reforming of biomass using a two stage fixed bed reactor. The biomass sample was pyrolysed under nitrogen at a pyrolysis temperature of 500 °C, the evolved pyrolysis volatiles were passed to a second stage with steam and the gases were reformed in the presence of tyre char as catalyst. The influence of catalyst bed temperature, steam to biomass ratio, reaction time and tyre ash metals were investigated. The influence of the catalytic activity of tyre ash minerals on composition of syngas and tar decomposition during the steam reforming of biomass was significant as the removal of minerals led to a decrease in the H2 yield. Raising the steam injection rate and reforming temperature resulted in an increase in H2 production as steam reforming and char gasification reactions were enhanced. The maximum H2 content in the product syngas of 56 vol.% was obtained at a reforming temperature of 900 °C and with a steam to biomass mass ratio of 6 (g/g). Further investigation of the influence of the biomass:steam ratio on syngas quality showed that the H2:CO molar ratio was increased from 1.8 (steam: biomass ratio; 1.82 g g−1) to 3 (steam: biomass ratio; 6 g g−1).
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Multifunctional applications of biochar beyond carbon storage
Bolan, N., Hoang, S. A., Beiyuan, J., Gupta, S., Hou, D., Karakoti, A., Joseph, S., Jung, S., Kim, K.-H., Kirkham, M. B., et al. (2022) · International Materials Reviews · doi:10.1080/09506608.2021.1922047 · Cited by 638
Lepage, T., Kammoun, M., Schmetz, Q., & Richel, A. (2021) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2020.105920 · Cited by 566
Evaluation of thermochemical routes for hydrogen production from biomass: A review
Arregi, A., Amutio, M., Lopez, G., Bilbao, J., & Olazar, M. (2018) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.03.089 · Cited by 504
Recent advances in membrane technologies for hydrogen purification
Bernardo, G., Araújo, T., da Silva Lopes, T., Sousa, J., & Mendes, A. (2020) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2019.06.162 · Cited by 391
Gabhane, J. W., Bhange, V. P., Patil, P. D., Bankar, S. T., & Kumar, S. (2020) · SN Applied Sciences · doi:10.1007/s42452-020-3121-5 · Cited by 280
Metadata
- Authors
- Al-Rahbi, A. S., & Williams, P. T.
- Venue
- Applied Energy
- Publisher
- Elsevier BV
- Published
- 2017-03
- Volume
- 190
- Pages
- 501-509
- ISSN
- 0306-2619 (ISSN-L)
- OpenAlex
- W2571445070
- Cited by
- 228
- References
- 0
- FWCI
- 11.41
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Hydrogen-rich syngas production and tar removal from biomass gasification using sacrificial tyre pyrolysis char. https://app.cochat.ai/papers/10.1016/j.apenergy.2016.12.099
- The paper
- Al-Rahbi, A. S., & Williams, P. T. (2017). Hydrogen-rich syngas production and tar removal from biomass gasification using sacrificial tyre pyrolysis char. Applied Energy. https://doi.org/10.1016/j.apenergy.2016.12.099
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.