The DOI matches its Crossref record; 50 of the 50 references it cites were found in a registry or an index.
PCM integrated to external building walls: An optimization study on maximum activation of latent heat
Abstract
Abstract Integration of the phase change materials (PCM) into the external building walls is an efficient method for reduction of energy consumption and regulation of energy demands due to increasing thermal inertia of the walls. This study aims to reveal the contribution of latent heat to the thermal performance of the wall and to determine the location, thickness and melting temperature of PCM for the maximum exploitation of latent heat for different climatic conditions. A comparative study is carried out for the wall coupled with PCM and the wall with Phase Stabilized PCM (PSM) to reveal the improvement provided by the latent heat. The influence of location, fusion temperature and layer thickness of PCM on energy saving, decrement factor and time lag was examined. The annually optimized PCM fusion temperature and layer thickness which utilizes the latent heat at maximum level considering both heating and cooling loads are determined for three cities of Turkey. The computed results show that the monthly optimized PCM melting temperature and PCM layer thickness vary from 6 to 34 °C, from 1 to 20 mm depending on climatic conditions. It was concluded that an optimization study should be conducted in order to prevent PCM behaves like PSM.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Updated world map of the Köppen-Geiger climate classification
Peel, M. C., Finlayson, B. L., & McMahon, T. A. (2007) · doi:10.5194/hessd-4-439-2007 · Cited by 13,640
Updated world map of the Köppen-Geiger climate classification
(2007) · doi:10.5194/hess-11-1633-2007 · Cited by 13,640
Zalba, B., Marı́n, J. M., Cabeza, L. F., & Mehling, H. (2003) · Applied Thermal Engineering · doi:10.1016/s1359-4311(02)00192-8 · Cited by 4,738
Long‐wave radiation from clear skies
Swinbank, W. C. (1963) · Quarterly Journal of the Royal Meteorological Society · doi:10.1002/qj.49708938105 · Cited by 1,631
A review on phase change material (PCM) for sustainable passive cooling in building envelopes
Akeiber, H., Nejat, P., Majid, M. Z. A., Wahid, M. A., Jomehzadeh, F., Zeynali Famileh, I., Calautit, J. K., Hughes, B. R., & Zaki, S. A. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.03.036 · Cited by 1,075
Use of microencapsulated PCM in concrete walls for energy savings
Cabeza, L. F., Castellón, C., Nogués, M., Medrano, M., Leppers, R., & Zubillaga, O. (2007) · Energy and Buildings · doi:10.1016/j.enbuild.2006.03.030 · Cited by 889
Investigation of the thermal performance of a passive solar test-room with wall latent heat storage
Athienitis, A. K., Liu, C., Hawes, D., Banu, D., & Feldman, D. (1997) · Building and Environment · doi:10.1016/s0360-1323(97)00009-7 · Cited by 439
Koschenz, M., & Lehmann, B. (2004) · Energy and Buildings · doi:10.1016/j.enbuild.2004.01.029 · Cited by 371
Saffari, M., de Gracia, A., Fernández, C., & Cabeza, L. F. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.05.107 · Cited by 343
Optimization of a phase change material wallboard for building use
Kuznik, F., Virgone, J., & Noel, J. (2008) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2007.10.012 · Cited by 319
Cited by
Latent thermal energy storage technologies and applications: A review
Jouhara, H., Żabnieńska-Góra, A., Khordehgah, N., Ahmad, D., & Lipinski, T. (2020) · International Journal of Thermofluids · doi:10.1016/j.ijft.2020.100039 · Cited by 543
Wang, X., Li, W., Luo, Z., Wang, K., & Shah, S. P. (2022) · Energy and Buildings · doi:10.1016/j.enbuild.2022.111923 · Cited by 493
Al-Yasiri, Q., & Szabó, M. (2021) · Journal of Building Engineering · doi:10.1016/j.jobe.2020.102122 · Cited by 432
Thermophysical properties and applications of nano-enhanced PCMs: An update review
Yang, L., Huang, J.-N., & Zhou, F. (2020) · Energy Conversion and Management · doi:10.1016/j.enconman.2020.112876 · Cited by 343
Hassan, F., Jamil, F., Hussain, A., Ali, H. M., Janjua, M. M., Khushnood, S., Farhan, M., Altaf, K., Said, Z., & Li, C. (2022) · Sustainable Energy Technologies and Assessments · doi:10.1016/j.seta.2021.101646 · Cited by 283
Metadata
- Authors
- Arıcı, M., Bilgin, F., Nižetić, S., & Karabay, H.
- Venue
- Applied Thermal Engineering
- Publisher
- Elsevier BV
- Published
- 2020-01
- Volume
- 165
- Pages
- 114560
- ISSN
- 1359-4311 (ISSN-L)
- OpenAlex
- W2980569436
- Cited by
- 324
- References
- 50
- FWCI
- 20.80
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: PCM integrated to external building walls: An optimization study on maximum activation of latent heat. https://app.cochat.ai/papers/10.1016/j.applthermaleng.2019.114560
- The paper
- Arıcı, M., Bilgin, F., Nižetić, S., & Karabay, H. (2020). PCM integrated to external building walls: An optimization study on maximum activation of latent heat. Applied Thermal Engineering. https://doi.org/10.1016/j.applthermaleng.2019.114560
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.