Laboratory testing and numerical simulation of piezoelectric energy harvester for roadway applications
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
The main objective of this study is to evaluate energy output and mechanical failure of piezoelectric energy harvester for roadway applications. The Bridge transducer with layered poling was designed to have high piezoelectric coefficient and capacitance. An energy harvester module that contains multiple stacked transducers was fabricated and tested under single pulse and cyclic loading events. Forensic analysis was conducted to investigate fatigue failure of piezoelectric transducers after repeated loading. Finite element simulation was used to evaluate output power and mechanical stress of energy harvesters with different layer thicknesses of epoxy adhesive, material types of packing material, and gap design. The predicted voltages and power outputs obtained from numerical simulation match well with experimental measurements. The energy output increased with the increase of loading frequency and load magnitude. This indicates that the energy harvesting performance is affected by vehicle weights, speed, and the embedment location of energy module. On the other hand, the resistive load can be optimized to increase the energy output. The analysis results showed that two different material failure models need to be considered in relation to mechanical failure of Bridge transducer, namely tensile and shear failure. It emphasizes that the optimum design of energy module should consider the balance of energy output and fatigue life that are affected by fabrication of single Bridge transducer and the packaging design of energy module.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Energy harvesting vibration sources for microsystems applications
Beeby, S. P., Tudor, M. J., & White, N. M. (2006) · Measurement Science and Technology · doi:10.1088/0957-0233/17/12/r01 · Cited by 3,008
Feasible integration in asphalt of piezoelectric cymbals for vibration energy harvesting
Moure, A., Izquierdo Rodríguez, M. A., Rueda, S. H., Gonzalo, A., Rubio-Marcos, F., Cuadros, D. U., Pérez-Lepe, A., & Fernández, J. F. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.01.030 · Cited by 157
Cited by
A critical review of roadway energy harvesting technologies
Gholikhani, M., Roshani, H., Dessouky, S., & Papagiannakis, A. T. (2020) · Applied Energy · doi:10.1016/j.apenergy.2019.114388 · Cited by 259
Piezoelectric energy harvesting from human walking using a two-stage amplification mechanism
Qian, F., Xu, T.-B., & Zuo, L. (2019) · Energy · doi:10.1016/j.energy.2019.116140 · Cited by 109
Harvesting kinetic energy from roadway pavement through an electromagnetic speed bump
Gholikhani, M., Nasouri, R., Tahami, S. A., Legette, S., Dessouky, S., & Montoya, A. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.05.060 · Cited by 91
Fabrication and performance of Tile transducers for piezoelectric energy harvesting
Liu, Z., Ding, G., Wang, J., Cai, G., Qin, X., & Shi, K. (2020) · AIP Advances · doi:10.1063/5.0002400 · Cited by 26
Preparation and performance study of a new type of Tile transducer for roadway applications
Wang, J., Cai, Y., Liu, Z., Ding, G., Cai, G., & Fu, H. (2020) · Journal of Intelligent Material Systems and Structures · doi:10.1177/1045389x20942571 · Cited by 17
Metadata
- Authors
- Jasim, A., Yesner, G., Wang, H., Safari, A., Maher, A., & Basily, B.
- Venue
- Applied Energy
- Publisher
- Elsevier BV
- Published
- 2018-08
- Volume
- 224
- Pages
- 438-447
- ISSN
- 0306-2619 (ISSN-L)
- OpenAlex
- W2801001692
- Cited by
- 114
- References
- 2
- FWCI
- 7.35
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Laboratory testing and numerical simulation of piezoelectric energy harvester for roadway applications. https://app.cochat.ai/papers/10.1016/j.apenergy.2018.05.040
- The paper
- Jasim, A., Yesner, G., Wang, H., Safari, A., Maher, A., & Basily, B. (2018). Laboratory testing and numerical simulation of piezoelectric energy harvester for roadway applications. Applied Energy. https://doi.org/10.1016/j.apenergy.2018.05.040
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.